EN ISO 7200:2004
(Main)Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004)
Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004)
ISO 7200:2004 specifies the data fields used in the title blocks and headers of technical product documents. Its purpose is to facilitate the exchange of documents and ensure compatibility by defining field names, their contents and their length (number of characters). It covers manual as well as computer-based design work, and is applicable to all kinds of documents for all kind of products -- in all phases of the product life cycle and all fields of engineering. It contains document-management-relevant data fields but not fields for specific technology areas or product requirements. It supports the cross-use and re-use of documents.
Technische Produktdokumentation - Datenfelder in Schriftfeldern und Dokumentenstammdaten (ISO 7200:2004)
Diese Internationale Norm legt Datenfelder für Schriftfelder in technischen Produktdokumentationen fest.
Die Norm erleichtert den Austausch von Dokumenten und sichert die Kompatibilität durch die Definition von Datenfeldnamen, deren Inhalten und Längen. Diese Regeln betreffen sowohl Bedienungsanleitungen, als auch computerunterstützte Entwicklungsarbeiten.
Diese Norm ist anwendbar für alle Arten von Dokumenten für alle Arten von Produkten, in sämtlichen Phasen des Produktlebenszyklusses und in allen Gebieten der Ingenieurswissenschaften. Die Norm beinhaltet für das Dokumentenmanagement relevante Datenfelder, jedoch nicht Felder für bestimmte Technologiebereiche oder Produktanforderungen. Die Norm unterstützt die Weiterverwendung und Wiederverwendung von Dokumenten.
Documentation technique de produits - Champs de données dans les cartouches d'inscription et têtes de documents (ISO 7200:2004)
L'ISO 7200:2004 spécifie les champs de données à utiliser dans les cartouches d'inscription et les têtes de documents techniques de produits. Son but est de faciliter les échanges de documents et d'assurer leur cohérence en définissant les noms de champ, leur contenu et leur longueur (nombre de caractères). Elle couvre aussi bien la conception informatisée que la conception manuelle, et elle s'applique à tous les types de documents, pour tous les types de produits, à tous les stades de leur durée de vie, dans tous les domaines techniques. Elle contient les champs de données relatifs à la gestion de documents, mais elle ne contient pas les champs concernant des secteurs technologiques spécifiques ou les exigences relatives aux produits. Elle permet l'utilisation croisée et la réutilisation des documents.
Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004)Technische Produktdokumentation - Datenfelder in Schriftfeldern und Dokumentenstammdaten (ISO 7200:2004)Documentation technique de produits - Champs de données dans les cartouches d'inscription et tetes de documents (ISO 7200:2004)Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004)01.110L]GHONHTechnical product documentationICS:Ta slovenski standard je istoveten z:EN ISO 7200:2004SIST EN ISO 7200:2004en01-julij-2004SIST EN ISO 7200:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 7200February 2004ICS 01.110English versionTechnical product documentation - Data fields in title blocks anddocument headers (ISO 7200:2004)Documentation technique de produits - Champs dedonnées dans les cartouches d'inscription et têtes dedocuments (ISO 7200:2004)Technische Produktdokumentation - Datenfelder inSchriftfeldern und Dokumentenstammdaten (ISO7200:2004)This European Standard was approved by CEN on 26 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 7200:2004 ESIST EN ISO 7200:2004
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 7200:2004
Reference numberISO 7200:2004(E)© ISO 2004
INTERNATIONAL STANDARD ISO7200Second edition2004-02-15Technical product documentation —Data fields in title blocks and document headers Documentation technique de produits — Champs de données dans les cartouches d'inscription et têtes de documents
ISO 7200:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2004 – All rights reserved
ISO 7200:2004(E) © ISO 2004 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 7200 was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee SC 1, Basic conventions. This second edition cancels and replaces the first edition (ISO 7200:1984), which has been technically revised.
INTERNATIONAL STANDARD ISO 7200:2004(E) © ISO 2004 – All rights reserved 1 Technical product documentation — Data fields in title blocks and document headers 1 Scope This International Standard specifies the data fields used in the title blocks and headers of technical product documents. Its purpose is to facilitate the exchange of documents and ensure compatibility by defining field names, their contents and their length (number of characters). It covers manual as well as computer-based design work, and is applicable to all kinds of documents for all kind of products — in all phases of the product life cycle and all fields of engineering. It contains document-management-relevant data fields but not fields for specific technology areas or product requirements. It supports the cross-use and re-use of documents. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 639 (all parts), Codes for the representation of names of languages ISO 5457, Technical product documentation — Sizes and layout of drawing sheets 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 classification method of structuring a defined type of item (objects or documents) into classes and subclasses in accordance with their characteristics 3.2 data field bounded area used for a specific category o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.