Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017)

ISO 13567-1:2017 establishes the general principles of layer structuring within CAD files. Layers are used to control visibility and to manage and communicate CAD file data. Layer names are used to represent this structure.
The principles are applicable to all parties involved in preparing and using technical documentation on computer systems. Although these principles are primarily for users, CAD system developers are expected to provide software tools capable of implementing and supporting ISO 13567-1:2017. An important use is also to structure data in component libraries produced by third parties.

Technische Produktdokumentation - Gliederung und Benennung von Layern für CAD - Teil 1: Übersicht und Grundlagen (ISO 13567-1:2017)

Documentation technique de produits - Organisation et dénomination des couches de CAO - Partie 1: Vue d'ensemble et principes (ISO 13567-1:2017)

L'ISO 13567-1:2017 établit les principes généraux de la structuration en couches au sein des fichiers de CAO. Les couches sont utilisées dans le but de contrôler la visibilité, de gérer et de communiquer les données d'un fichier de CAO. Les noms des couches sont utilisés pour représenter cette structure.
Ces recommandations sont applicables à toutes les parties impliquées dans la préparation et l'utilisation de documentation technique sur ordinateur. Bien que ces recommandations soient essentiellement destinées aux utilisateurs, les développeurs de système de CAO sont supposés fournir des outils logiciels capables d'implanter et de supporter l'ISO 13567-1:2017. Une autre utilisation importante est la structuration des données dans des bibliothèques de composants produites par des tiers.

Tehnična dokumentacija izdelkov - Organizacija in poimenovanje plasti pri računalniškem projektiranju (CAD) - 1. del: Pregled in načela (ISO 13567-1:2017)

Ta dokument določa splošna načela za strukturiranje plasti pri računalniško projektiranih datotekah (CAD). Plasti se uporabljajo
za nadzorovanje vidnosti in upravljanje ter komunikacijo podatkov v računalniško projektiranih datotekah. Imena plasti se uporabljajo za predstavitev
te strukture.
Načela veljajo za vse strani, ki sodelujejo pri pripravi in uporabi tehnične dokumentacije v računalniških sistemih. Čeprav so ta načela v prvi vrsti namenjena uporabnikom, se od razvijalcev računalniško projektiranih sistemov pričakuje, da bodo zagotovili programska orodja, ki bodo sposobna izvajati in podpirati ta dokument. Pomembna vrsta uporabe je tudi strukturiranje podatkov v knjižnicah sestavnih delov, ki jih ponujajo tretje strani.

General Information

Status
Published
Publication Date
31-Oct-2017
Withdrawal Date
30-May-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Nov-2017
Completion Date
01-Nov-2017

Relations

Buy Standard

Standard
EN ISO 13567-1:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2018
1DGRPHãþD
SIST EN ISO 13567-1:2003
7HKQLþQDGRNXPHQWDFLMDL]GHONRY2UJDQL]DFLMDLQSRLPHQRYDQMHSODVWLSUL
UDþXQDOQLãNHPSURMHNWLUDQMX &$' GHO3UHJOHGLQQDþHOD ,62
Technical product documentation - Organization and naming of layers for CAD - Part 1:
Overview and principles (ISO 13567-1:2017)
Technische Produktdokumentation - Gliederung und Benennung von Layern für CAD -
Teil 1: Übersicht und Grundlagen (ISO 13567-1:2017)
Documentation technique de produits - Organisation et dénomination des couches de
CAO - Partie 1: Vue d'ensemble et principes (ISO 13567-1:2017)
Ta slovenski standard je istoveten z: EN ISO 13567-1:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
35.240.10 5DþXQDOQLãNRSRGSUWR Computer-aided design
VQRYDQMH QDþUWRYDQMH (CAD)
REOLNRYDQMH  &$'
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 13567-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2017
EUROPÄISCHE NORM
ICS 01.110; 35.240.10 Supersedes EN ISO 13567-1:2002
English Version
Technical product documentation - Organization and
naming of layers for CAD - Part 1: Overview and principles
(ISO 13567-1:2017)
Documentation technique de produits - Organisation et Technische Produktdokumentation - Gliederung und
dénomination des couches de CAO - Partie 1: Vue Benennung von Layern für CAD - Teil 1: Übersicht und
d'ensemble et principes (ISO 13567-1:2017) Grundlagen (ISO 13567-1:2017)
This European Standard was approved by CEN on 19 October 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13567-1:2017 E
worldwide for CEN national Members.

Contents Page
European Foreword . 3

European Foreword
This document (EN ISO 13567-1:2017) has been prepared by Technical Committee ISO/TC 10
“Technical product documentation” in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2018 and conflicting national standards shall be
withdrawn at the latest by May 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13567-1:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13567-1:2017 has been approved by CEN as EN ISO 13567-1:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 13567-1
Second edition
2017-09
Technical product documentation —
Organization and naming of layers
for CAD —
Part 1:
Overview and principles
Documentation technique de produits — Organisation et
dénomination des couches de CAO —
Partie 1: Vue d'ensemble et principes
Reference number
ISO 13567-1:2017(E)
©
ISO 2017
ISO 13567-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 13567-1:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 1
4 General . 2
5 Fundamental principles . 2
5.1 Organizational convention . 2
5.2 Layer name format convention . 2
5.3 Code convention . 3
Bibliography . 4
ISO 13567-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO membe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.