prEN 12217

Doors - Operating forces - Requirements and classification

This European Standard is applicable to hinged/pivoted and sliding doorsets with latches, for pedestrian use. It defines the classification of the test results for the forces to open/close doors and to engage/release and lock/unlock the hardware using a key or handle, after testing in accordance with EN 12046-2.
It is only applicable to the manual operation of doorsets.
The measurement of forces for doorsets with self closing devices engaged is excluded from this test method. It is also not applicable to doorsets with special hardware e.g. emergency exit devices.
The tests are applicable to doorsets of any material.
The operation of some glazed doors, (door high windows) involves hardware with latches and may be classified in accordance with this standard.

Türen - Bedienungskräfte - Anforderungen und Klassifizierung

Die vorliegende Europäische Norm gilt für Drehflügel- und Schiebetürelemente, die mit Schlossfallen ausgestattet und für die Benutzung durch Fußgänger vorgesehen sind. Sie legt die Klassifizierung der Prüfergebnisse fest, die sich bei Prüfung nach EN 12046-2 für die Kräfte ergeben, die zum Öffnen/Schließen von Türen sowie zum Einklinken/Freigeben und Verriegeln/Entriegeln der Beschläge mit Hilfe eines Schlüssels oder eines Drückers erforderlich sind.
Sie ist ausschließlich auf die Handbetätigung von Türelementen anwendbar.
Die Messung der Kräfte für Türelemente mit Selbstschließung ist von diesem Prüfverfahren ausgenommen. Das Verfahren ist ebenfalls nicht auf Türelemente mit speziellen Beschlägen, z. B. Notausgangsverschlüsse, anwendbar.
Die Prüfungen sind auf Türelemente aller Werkstoffe anwendbar.
Die Bedienung einiger verglaster Türen (Fenstertüren) umfasst Beschläge mit Fallen und darf entsprechend der vorliegenden Norm klassifiziert werden.

Portes - Forces de manoeuvre - Prescription et classification

Vrata - Sile pri uporabi - Zahteve in klasifikacija

General Information

• Status: Not Published
• Publication Date: 20-Apr-2014
• Withdrawal Date: 20-Oct-2014
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 1/2 - Windows and doors
• Current Stage: 4098 - Decision to abandon - Enquiry
• Start Date: 06-Sep-2013
• Completion Date: 06-Sep-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: oSIST prEN 12217:2011 - Doors - Operating forces - Requirements and classification

Relations

• Revises: EN 12217:2003 - Doors - Operating forces - Requirements and classification
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12217:2011
01-februar-2011
Vrata - Sile pri uporabi - Zahteve in klasifikacija
Doors - Operating forces - Requirements and classification
Türen - Bedienungskräfte - Anforderungen und Klassifizierung
Portes - Forces de manoeuvre - Prescription et classification
Ta slovenski standard je istoveten z: prEN 12217
ICS:
91.060.50 Vrata in okna Doors and windows
oSIST prEN 12217:2011 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12217:2011

---------------------- Page: 2 ----------------------
oSIST prEN 12217:2011


EUROPEAN STANDARD
DRAFT
prEN 12217
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2010
ICS 91.060.50 Will supersede EN 12217:2003
English Version
Doors - Operating forces - Requirements and classification
Portes - Forces de manoeuvre - Prescription et Türen - Bedienungskräfte - Anforderungen und
classification Klassifizierung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12217:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12217:2011
prEN 12217:2010 (E)
Contents  Page
Foreword . 3
1 Scope . 4
2 Normative references .
...