EN ISO 12137-2:2006

Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997)

Deals with the sampling and testing of paints, varnishes and related products. Contains a method for the determination of the mar resistance of a single coating or the upper layer of a multicoat system, using a pointed stylus. Applicable to the comparison of the mar resistance of different coatings.

Beschichtungsstoffe - Bestimmung der Kratzfestigkeit - Teil 2: Verfahren mit spitzem Stichel (ISO 12137-2:1997)

1.1 Dieser Teil von ISO 12137 gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung
von Beschichtungsstoffen, wie Lacke und Anstrichstoffe, behandelt.
Dieser Teil von ISO 12137 legt ein Verfahren zum Bestimmen der Widerstandsfähigkeit einer einzelnen
Schicht aus einem Beschichtungsstoff oder der obersten Schicht eines Mehrschichtsystems gegen Verkratzen
fest, bei dem ein spitzer Stichel angewendet wird. Teil 1 von ISO 12137 legt ein Verfahren mit einem
gebogenen Stichel fest. Welches der beiden Verfahren gewählt wird, hängt von der jeweiligen Fragestellung
ab.
1.2 Diese Prüfung wurde zum Vergleich der Widerstandsfähigkeit unterschiedlicher Beschichtungen gegen
Verkratzen als nützlich befunden. Sie ist besonders geeignet, wenn bei einer Reihe beschichteter
Probenplatten mit deutlich unterschiedlicher Widerstandsfähigkeit gegen Verkratzen relative Einstufungen
erhalten werden sollen.

Peintures et vernis - Détermination de la résistance à la détérioration - Partie 2: Méthode utilisant un stylet pointu (ISO 12137-2:1997)

Barve in laki – Ugotavljanje odpornosti proti praskam – 2. del: Metoda z uporabo ostro ošiljenega praskala (ISO 12137-2:1997)

General Information

• Status: Withdrawn
• Publication Date: 20-Jun-2006
• Withdrawal Date: 14-Oct-2011
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Oct-2011
• Completion Date: 15-Oct-2011
• Ref Project: SIST EN ISO 12137-2:2006 - Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997)

Relations

• Replaced By: EN ISO 1518-2:2011 - Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12137-2:2006
01-oktober-2006
Barve in laki – Ugotavljanje odpornosti proti praskam – 2. del: Metoda z uporabo
ostro ošiljenega praskala (ISO 12137-2:1997)
Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed
stylus (ISO 12137-2:1997)
Beschichtungsstoffe - Bestimmung der Kratzfestigkeit - Teil 2: Verfahren mit spitzem
Stichel (ISO 12137-2:1997)
Peintures et vernis - Détermination de la résistance a la détérioration - Partie 2: Méthode
utilisant un stylet pointu (ISO 12137-2:1997)
Ta slovenski standard je istoveten z: EN ISO 12137-2:2006
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 12137-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12137-2:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 12137-2:2006
EUROPEAN STANDARD
EN ISO 12137-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2006
ICS 87.040

English Version
Paints and varnishes - Determination of mar resistance - Part 2:
Method using a pointed stylus (ISO 12137-2:1997)
Peintures et vernis - Détermination de la résistance à la Beschichtungsstoffe - Bestimmung der Kratzfestigkeit - Teil
détérioration - Partie 2: Méthode utilisant un stylet pointu 2: Verfahren mit spitzem Stichel (ISO 12137-2:1997)
(ISO 12137-2:1997)
This European Standard was approved by CEN on 19 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12137-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12137-2:2006
EN ISO 12137-2:2006 (E)






Foreword



The text of ISO 12137-2:1997 has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 12137-2:2006 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2006, and conflicting national
standards shall be withdrawn at the latest by December 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 12137-2:1997 has been approved by CEN as EN ISO 12137-2:2006 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12137-2:2006
INTERNATIONAL
1213712
STANDARD
First edition
1997-02-15
Paints and varnishes - Determination
of mar resistance -
Part 2:
Method using a pointed stylus
- Dhtermination de la rksistance 5 la dktbrioration -
Peinture et vernis
Pat-tie 2: Mkthode utilisant un sty/et pointu
Reference number
IS0 12137-2:1997(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 12137-2:2006
IS0 12137=2:1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International orga
...