Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 1: Upholstery applications

This document specifies requirements for the designations and descriptions used in the exchange of goods when exhibiting, promoting (e.g., advertising and labelling), and placing on the market when leather is used in upholstered furniture.
Parts of furniture with appearance that does not correspond to leather (e. g. wood, metal) and parts of purely decorative nature are not covered by this document.
The designation and/or description of leather in footwear, leather goods and leather clothing including gloves are not covered by this document.
The designation and/or description of leather in automotive interior applications is covered in EN 16223 2.

Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von Automobilen - Teil 1: Verwendungen bei Polstermöbeln

Dieses Dokument legt die Anforderungen an die Bezeichnungen und Beschreibungen fest, die im Rahmen des Warenaustausches beim Ausstellen, bei der Verkaufsförderung (z. B. Werbung und Etikettierung) und beim Inverkehrbringen verwendet werden, wenn Leder bei Polstermöbeln verwendet wird.
Möbelteile, deren Aussehen nicht dem von Leder entspricht (z. B. Holz, Metall) und Teile mit rein dekorativem Charakter werden in diesem Dokument nicht behandelt.
Die Bezeichnung und/oder Beschreibung von Leder in Schuhen, Lederwaren und bei Lederbekleidung einschließlich Handschuhen wird in diesem Dokument nicht behandelt.
Die Bezeichnung und/oder Beschreibung von Leder in der Innenausstattung von Automobilen werden in EN 16223 2 behandelt.

Cuir - Exigences relatives à la désignation et à la description du cuir des garnitures et intérieurs automobiles - Partie 1 : Garnitures

Le présent document spécifie les exigences relatives aux désignations et descriptions utilisées dans le cadre des échanges de marchandises lors de l’exposition, de la promotion (par exemple, publicité et étiquetage) et de la mise sur le marché lorsque le cuir est utilisé dans les meubles capitonnés.
Les parties de meubles dont l’aspect ne ressemble en rien au cuir (par exemple, bois, métal) et les pièces à vocation purement décorative ne sont pas couvertes par ce document.
La désignation et/ou la description du cuir de chaussures, d’articles de maroquinerie et de vêtements en cuir, y compris les gants, ne sont pas traitées dans le présent document.
La désignation et/ou la description du cuir dans les intérieurs automobiles sont traitées dans l’EN 16223 2.

Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in avtomobilsko notranjo opremo - 1. del: Uporaba za oblazinjenje

Ta evropski standard določa zahteve za označevanje in opisovanje, ki se naj uporabljata v javni ali komercialni komunikaciji, na nalepkah ali opisih izdelkov, ko se usnje uporablja za oblazinjenje pohištva.
Ta dokument ne zajema označevanja ali opisovanja usnja, ki se uporablja za obutev, usnjene izdelke in usnjena oblačila, vključno z rokavicami.

General Information

Status
Published
Publication Date
30-Oct-2022
Withdrawal Date
30-Jan-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Jul-2022
Due Date
18-Nov-2021
Completion Date
06-Jul-2022

Relations

Buy Standard

Standard
EN 16223-1:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 16223-1:2021
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16223-1:2022
01-september-2022
Nadomešča:
SIST EN 16223:2013
Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in
avtomobilsko notranjo opremo - 1. del: Uporaba za oblazinjenje

Leather - Requirements for the designation and description of leather in upholstery and

automotive interior applications - Part 1: Upholstery applications
Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen

und die Innenausstattung von Automobilen - Teil 1: Verwendungen bei Polstermöbeln

Cuir - Exigences relatives à la désignation et à la description du cuir des garnitures et

intérieurs automobiles - Partie 1 : Garnitures
Ta slovenski standard je istoveten z: EN 16223-1:2022
ICS:
59.140.30 Usnje in krzno Leather and furs
97.140 Pohištvo Furniture
SIST EN 16223-1:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16223-1:2022
---------------------- Page: 2 ----------------------
SIST EN 16223-1:2022
EN 16223-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2022
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN 16223:2012
English Version
Leather - Requirements for the designation and
description of leather in upholstery and automotive
interior applications - Part 1: Upholstery applications

Cuir - Exigences relatives à la désignation et à la Leder - Anforderungen an Bezeichnung und

description du cuir des garnitures et intérieurs Beschreibung von Leder für Polsterungen und die

automobiles - Partie 1 : Garnitures Innenausstattung von Automobilen - Teil 1:
Verwendungen bei Polstermöbeln
This European Standard was approved by CEN on 22 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16223-1:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 16223-1:2022
EN 16223-1:2022 (E)
Contents Page

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 General principles ................................................................................................................................ 6

5 Requirements ......................................................................................................................................... 6

Bibliography ......................................................................................................................................................... 7

---------------------- Page: 4 ----------------------
SIST EN 16223-1:2022
EN 16223-1:2022 (E)
European foreword

This document (EN 16223-1:2022) has been prepared by Technical Committee CEN/TC 289 “Leather”,

the secretariat of which is held by UNI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall

be withdrawn at the latest by January 2023.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

EN 16223-2, supersedes EN 16223:2012.
This document, together with

In comparison with the previous edition, the following technical modifications have been made:

— EN 16223:2012, Leather - Requirements for the designation and description of leather in upholstery

and automotive interior applications has been split into two parts:
— Part 1 - Upholstery applications (this document);
— Part 2 - Automotive interior application.
— Clause 3: modification of some definitions.
— Modifications in Clause 4 “General principles” and Clause 5 “Requirements”.
— Editorial updates.
Any feedback a
...

SLOVENSKI STANDARD
oSIST prEN 16223-1:2021
01-januar-2021
Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in
avtomobilsko notranjo opremo - 1. del: Uporaba za oblazinjenje

Leather - Requirements for the designation and description of leather in upholstery and

automotive interior applications - Part 1: upholstery applications
Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen

und die Innenausstattung von Automobilen - Teil 1: Verwendungen bei Polstermöbeln

Ta slovenski standard je istoveten z: prEN 16223-1
ICS:
59.140.30 Usnje in krzno Leather and furs
97.140 Pohištvo Furniture
oSIST prEN 16223-1:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16223-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16223-1:2021
DRAFT
EUROPEAN STANDARD
prEN 16223-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 59.140.30 Will supersede EN 16223:2012
English Version
Leather - Requirements for the designation and
description of leather in upholstery and automotive
interior applications - Part 1: upholstery applications
Leder - Anforderungen an Bezeichnung und
Beschreibung von Leder für Polsterungen und die
Innenausstattung von Automobilen - Teil 1:
Verwendungen bei Polstermöbeln

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 289.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16223-1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16223-1:2021
prEN 16223-1:2021 (E)
Contents Page

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 General principles ................................................................................................................................ 6

5 Requirements ......................................................................................................................................... 6

Bibliography ......................................................................................................................................................... 7

---------------------- Page: 4 ----------------------
oSIST prEN 16223-1:2021
prEN 16223-1:2021 (E)
European foreword

This document (prEN 16223-1:2021) has been prepared by Technical Committee CEN/TC 289 “Leather”,

the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16223:2012.

In comparison with the previous edition, the following technical modifications have been made:

— EN 16223:2012 has been split into two parts, Part 1: Upholstery applications and Pa

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.