EN 1366-12:2014+A1:2019
(Main + Amendment)Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1 and EN 1366-2.
This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification.
This European Standard is not suitable for testing fire dampers, see EN 1366-2.
This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.
Feuerwiderstandsprüfungen für Installationen - Teil 12: Nichtmechanische Brandschutzverschlüsse für Lüftungsleitungen
Dieser Teil von EN 1366 legt ein Verfahren zur Bestimmung der Feuerwiderstandsdauer von nicht-mechanischen Brandschutzverschlüssen fest, die in feuerwiderstandsfähigen raumabschließenden Bauteilen eingebaut sind und dafür vorgesehen sind, Wärme und dem Durchtritt von Rauch und Gasen bei hohen Temperaturen standzuhalten. Diese Europäische Norm wird in Zusammenhang mit EN 1363-1 und EN 1366-2 angewendet.
Diese Europäische Norm ist ohne Abänderung für die Prüfung von nichtmechanischen Brandschutz–verschlüssen in Unterdecken nicht geeignet.
Diese Europäische Norm ist nicht geeignet für die Prüfung von Brandschutzklappen, siehe EN 1366-2.
Diese Europäische Norm ist nicht geeignet für die Prüfung von Produkten wie z. B. Lüftungsbausteinen, da sich die zugehörigen Drücke und Volumendurchflüsse unterscheiden und abweichendes Verhalten verursachen können.
Essais de résistance au feu des installations techniques - Partie 12 : Barrière résistante au feu non mécanique pour les conduits de ventilation
La présente partie de l’EN 1366 spécifie une méthode de détermination de la résistance au feu des barrières résistantes au feu non mécaniques installées dans des éléments de séparation résistants au feu, conçues pour résister à la chaleur et au passage des fumées et des gaz à haute température. La présente Norme européenne est utilisée conjointement avec l’EN 1363-1 et l’EN 1366-2.
Sans modification, la présente Norme européenne ne convient pas aux essais de barrières résistantes au feu non mécaniques dans les plafonds suspendus.
La présente Norme européenne ne convient pas pour l’essai de clapets résistant au feu ; voir l’EN 1366-2.
La présente Norme européenne ne convient pas pour l’essai de produits tels que les grilles de transfert, comme les pressions et débits concernés sont différents et peuvent conduire à un comportement différent.
Preskusi požarne odpornosti servisnih inštalacij - 12. del: Nemehanske požarne pregrade za prezračevalne kanale
Ta del standarda EN 1366 določa metodo za ugotavljanje požarne odpornosti nemehanskih požarnih pregrad, ki so nameščene na požarnih ločevalnih elementih, zasnovanih, da vzdržijo vročino ter prehod dima in plinov pri visokih temperaturah. Ta evropski standard se uporablja v povezavi s standardoma EN 1363-1 in EN 1366-2. Ta evropski standard ni primeren za preskušanje nemehanskih požarnih pregrad v spuščenih stropih brez sprememb. Ta evropski standard ni primeren za preskušanje dušilnikov ognja, glej EN 1366-2. Ta evropski standard ni primeren za preskušanje izdelkov, kot so rešetke za prehod zraka, ker so tlaki in pretoki različni, kar lahko povzroči drugačno obnašanje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2020
Nadomešča:
SIST EN 1366-12:2014
Preskusi požarne odpornosti servisnih inštalacij - 12. del: Nemehanske požarne
pregrade za prezračevalne kanale
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for
ventilation ductwork
Feuerwiderstandsprüfungen für Installationen - Teil 12: Nichtmechanische
Brandschutzverschlüsse für Lüftungsleitungen
Essais de résistance au feu des installations techniques - Partie 12 : Barrière résistante
au feu non mécanique pour les conduits de ventilation
Ta slovenski standard je istoveten z: EN 1366-12:2014+A1:2019
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 1366-12:2014+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2019
EUROPÄISCHE NORM
ICS 13.220.50; 91.140.30
English Version
Fire resistance tests for service installations - Part 12:
Non-mechanical fire barrier for ventilation ductwork
Essais de résistance au feu des installations techniques Feuerwiderstandsprüfungen für Installationen - Teil
- Partie 12 : Barrière résistante au feu non mécanique 12: Nichtmechanische Brandschutzverschlüsse für
pour les conduits de ventilation Lüftungsleitungen
This European Standard was approved by CEN on 13 June 2014 and includes Amendment 1 approved by CEN on 2 September
2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1366-12:2014+A1:2019 E
worldwide for CEN national Members.
Contents Page
Foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Test equipment . 8
4.1 General . 8
4.2 Connecting duct . 8
4.3 Volume flow measuring station . 8
4.4 Condensing unit . 9
4.5 Gas temperature measuring devices . 9
4.6 Exhaust fan system . 9
5 Test conditions . 9
6 Test specimen . 9
6.1 Size . 9
6.2 Number of tests . 9
6.2.1 General . 9
6.2.2 Supporting construction . 10
6.2.3 Method of installation in the supporting construction . 10
6.2.4 Method of installation on to the supporting construction . 10
6.2.5 Method of installation away from the supporting construction . 10
6.3 Design . 11
6.3.1 General . 11
6.3.2 Orientation to be tested . 11
6.3.3 Non-mechanical fire barriers installed within a wall or floor opening . 11
6.3.4 Non-mechanical fire barriers mounted on to the face of a wall or floor . 11
6.3.5 Non-mechanical fire barriers mounted remote from a wall or floor . 11
7 Installation of test specimen . 12
7.1 General . 12
7.2 Supporting construction . 12
7.3 Minimum separation. 12
8 Conditioning . 13
8.1 General . 13
8.2 Water-based sealing materials . 13
9 Application of instrumentation . 13
9.1 Thermocouples . 13
9.1.1 Furnace thermocouples (plate thermometers) . 13
9.1.2 Unexposed surface temperature . 13
9.2 Furnace pressure . 13
9.2.1 General . 13
9.2.2 Pressure differential measurement, furnace and connecting duct . 13
10 Test procedure . 14
10.1 Determination of leakage of connecting duct and measuring station. 14
10.2 Fire test procedure . 14
11 Performance criteria . 15
12 Test report . 16
13 Field of direct application of test results . 17
13.1 Size of non-mechanical fire barrier . 17
13.2 Non-mechanical fire barriers installed within structural openings . 17
13.3 Non-mechanical fire barriers installed onto the face of a wall or a floor . 17
13.4 Non-mechanical fire barriers remote from a wall or floor . 17
13.5 Fire from above . 18
13.6 Separation between non-mechanical fire barriers and between non-mechanical fire
barriers and construction elements . 18
13.7 Supporting constructions . 18
Annex A (normative) EOTA TR026 - Characterization, Aspects of Durability and Factory
Production Control for Reactive Materials, Components and Products . 31
Bibliography . 32
European foreword
This document (EN 1366-12:2014+A1:2019) has been prepared by Technical Committee CEN/TC 127
“Fire safety in buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2020 and conflicting national standards shall be
withdrawn at the latest by May 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
!This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association."
This document includes Amendment 1 approved by CEN on 2 September 2019.
This document supersedes !EN 1366-12:2014".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
EN 1366, Fire resistance tests for service installations, consists of the following parts:
— Part 1: Ventilation ducts;
— Part 2: Fire dampers;
— Part 3: Penetration seals;
— Part 4: Linear joint seals;
— Part 5: Service ducts and shafts;
— Part 6: Raised access and hollow core floors;
— Part 7: Conveyor systems and their closures;
— Part 8: Smoke extraction ducts;
— Part 9: Single compartment smoke extraction ducts;
— Part 10: Smoke control dampers;
— Part 11: Fire protective systems for cable systems and associated components !text deleted";
— Part 12: Non-mechanical fire barrier for ventilation ductwork (this document);
— Part 13: !Chimneys".
!text deleted"
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
The purpose of the test is to evaluate the ability of a non-mechanical (no moving parts) fire barrier (see
Annex A) to prevent fire and smoke spreading from one fire compartment
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.