EN ISO 17231:2011

Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2006)

ISO 17231:2006 specifies a method for determining the repellency of leather to surface wetting. It is applicable to all leathers intended for use in clothing. The method does not determine the resistance of leather to water penetration.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der wasserabweisenden Eigenschaften von Bekleidungsleder (ISO 17231:2006)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der wasserabweisenden Eigenschaften von Leder fest. Sie kann auf alle Arten von Leder für die Herstellung von Kleidung angewendet werden. Dieses Verfahren bestimmt nicht die Beständigkeit gegen die Durchdringung von Wasser.

Cuir - Essais physiques et mécaniques - Détermination de la résistance au mouillage superficiel des cuirs pour vêtements (ISO 17231:2006)

L'ISO 17231:2006 spécifie une méthode de détermination de la résistance au mouillage superficiel des cuirs. Elle s'applique à tous les cuirs destinés à être utilisés dans la confection de vêtements. La méthode ne détermine pas la résistance du cuir à la pénétration de l'eau.

Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje odbijanja vode pri usnju za oblačila (ISO 17231:2006)

ISO 17231:2006 določa metodo za ugotavljanje odbojnosti usnja pri površinski navlaženosti. Velja za vse vrste usnja, ki se uporabljajo za oblačila. Metoda ne ugotavlja odpornosti usnja proti penetraciji vode.

General Information

• Status: Withdrawn
• Publication Date: 13-Sep-2011
• Withdrawal Date: 19-Sep-2017
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 2 - Physical test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Sep-2017
• Ref Project: SIST EN ISO 17231:2011 - Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2006)

Relations

• Replaces: EN 14340:2004 - Leather - Physical and mechanical tests - Determination of water repellency of garment leather
• Effective Date: 03-Jul-2010
• Replaced By: EN ISO 17231:2017 - Leather - Physical and mechanical tests - Determination of water repellency of garment leather (ISO 17231:2017)
• Effective Date: 01-Mar-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2011
1DGRPHãþD
SIST EN 14340:2004
8VQMH)L]LNDOQRLQPHKDQVNRSUHVNXãDQMH8JRWDYOMDQMHRGELMDQMDYRGHSULXVQMX
]DREODþLOD,62
Leather - Physical and mechanical tests - Determination of water repellency of garment
leather (ISO 17231:2006)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
wasserabweisenden Eigenschaften von Bekleidungsleder (ISO 17231:2006)
Cuir - Essais physiques et mécaniques - Détermination de la résistance au mouillage
superficiel des cuirs pour vêtements (ISO 17231:2006)
Ta slovenski standard je istoveten z: EN ISO 17231:2011
ICS:
59.140.30 Usnje in krzno Leather and furs
61.020 2EODþLOD Clothes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 17231
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2011
ICS 59.140.30 Supersedes EN 14340:2004
English Version
Leather - Physical and mechanical tests - Determination of water
repellency of garment leather (ISO 17231:2006)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la résistance au mouillage superficiel des cuirs pour Bestimmung der wasserabweisenden Eigenschaften von
vêtements (ISO 17231:2006) Bekleidungsleder (ISO 17231:2006)
This European Standard was approved by CEN on 18 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17231:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 17231:2006 has been prepared by International Union of Leather Technologists and Chemists
Societies and has been taken over as EN ISO 17231:2011 by Technical Committee CEN/TC 289 “Leather”
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14340:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17231:2006 has been approved by CEN as a EN ISO 17231:2011 without any modification.

INTERNATIONAL ISO
STANDARD 17231
IULTCS/IUP
First edition
2006-09-15
Leather — Physical and mechanical
tests — Determination of water repellency
of garment leather
Cuir — Essais physiques et mécaniques — Détermination de la
résistance au mouillage superficiel des cuirs pour vêtements

Reference number
ISO 17231:2006(E)
IULTCS/IUP 37:2006(E)
©
ISO 2006
ISO 17231:2006(E)
IULTCS/IUP 37:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 17231:2006(E)
IULTCS/IUP 37:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17231 was prepared by the Physical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289 Leather, the secretariat of which is
held by UNI. It was published as EN 14340. It is based on IUP 37 published in J. Soc. Leather Tech. Chem.,
86 (7), p. 339, 2002, and declared an official method of the IULTCS in May 2003.
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the
advancement of leather science and technology. IULTCS has three Commissions, which are responsible for
establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.

SIST EN I
...