Status
Not Published
Publication Date
01-Dec-2026
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
29-Oct-2026
Due Date
12-May-2026
Completion Date
29-Oct-2026

Buy Documents

Draft

EN ISO 6142-1:2015/oprA1:2026

English language (5 pages)
Preview
Preview
e-Library read for
×1 day

EN ISO 6142-1:2015/A1:2026 is the CEN adoption of Amendment 1 to ISO 6142-1 for gas analysis. It corrects formulae in Annex E and Annex G of EN ISO 6142-1:2015, the standard for preparing calibration gas mixtures by the gravimetric method for Class I mixtures. Use it together with the base Part 1 when working on those calculations.

What does EN ISO 6142-1:2015/A1:2026 specify?

EN ISO 6142-1:2015/A1:2026 is an amendment to the base Part 1 standard. Its purpose is limited to correcting formulae, so it changes the calculation expressions rather than the overall method for preparing calibration gas mixtures.

AnnexWhat it covers
Annex EFormulae E.3 and E.4, replaced by corrected expressions
Annex GFormulae G.1 to G.7, replaced by corrected expressions

The document is organized as front matter, a foreword, and the amendment text for the two annexes. For users, that means the practical work is to apply the corrected equations wherever Annex E or Annex G is used.

What are the key requirements of EN ISO 6142-1:2015/A1:2026?

EN ISO 6142-1:2015/A1:2026 tells users to replace the affected formulae in Annex E and Annex G with the corrected versions given in the amendment. In practice, any calculation sheet, spreadsheet, or software that follows those annexes should use the revised expressions.

  • Annex E - replace Formula (E.3) and Formula (E.4). This matters wherever Annex E is used for calculations linked to the gravimetric preparation of Class I mixtures.
  • Annex G - replace Formulae (G.1) through (G.7). This matters for any implementation that relies on Annex G calculations or derivations.
  • Use with the base standard - the amendment is read with EN ISO 6142-1:2015, because the corrected equations belong to that method and do not stand alone.
  • Update internal tools - if a laboratory, supplier, or quality system has copied the annex formulae into procedures or software, those implementations need to match the amended expressions.
  • Check references to annex formula numbers - the amendment keeps the same annex structure, so users should make sure the right formula number is linked to the right corrected equation.

What terms does EN ISO 6142-1:2015/A1:2026 define?

  • Calibration gas mixture - a gas mixture prepared for calibration use, especially for analytical measurements.
  • Gravimetric method - a preparation method based on weighing components to obtain the mixture composition.
  • Class I mixtures - the mixture class named in the title; this amendment applies to that class only.
  • Annex E - the annex whose formulae are corrected by this amendment.
  • Annex G - the annex whose formulae are corrected by this amendment.
  • ISO - the International Organization for Standardization, named in the foreword as the body responsible for the International Standard.

Who uses EN ISO 6142-1:2015/A1:2026?

EN ISO 6142-1:2015/A1:2026 is used by laboratories and organizations that prepare calibration gas mixtures, especially when they work by gravimetric methods. It is also relevant to metrology, chemical analysis, and quality teams that check or approve the calculations behind mixture preparation.

Typical users include:

  • gas mixture producers
  • calibration laboratories
  • quality managers reviewing calculation procedures
  • engineers maintaining calculation software or spreadsheets
  • buyers or technical evaluators checking that a supplier follows the corrected annex formulae

What changed in EN ISO 6142-1:2015/A1:2026 from the previous edition?

EN ISO 6142-1:2015/A1:2026 is Amendment 1 to EN ISO 6142-1:2015 and corresponds to ISO 6142-1:2015/Amd 1:2020. It corrects the formulae in Annex E and Annex G.

Which standards are used with EN ISO 6142-1:2015/A1:2026?

EN ISO 6142-1:2015 is the base standard amended by this document. The title also identifies the international amendment ISO 6142-1:2015/Amd 1:2020, and the Slovenian listing shows the same amendment as EN ISO 6142-1:2015/prA1.

What does the EN ISO 6142-1:2015/A1:2026 document contain?

The document contains the front matter, the foreword, and the amendment instructions for Annex E and Annex G. The amendment text gives replacement equations for Formula (E.3), Formula (E.4), and Formulae (G.1) to (G.7).

It is a focused correction document, so its practical value is in updating calculations used for calibration gas mixture preparation. Users who implement the standard in software, worksheets, or procedures should check those annex formulae against the amended version.

Relations

Effective Date
27-May-2026

Buy Documents

Draft

EN ISO 6142-1:2015/oprA1:2026

English language (5 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ECOCERT

Organic and sustainability certification.

COFRAC France Verified

Eurofins Food Testing Global

Global leader in food, environment, and pharmaceutical product testing.

COFRAC Luxembourg Verified

Intertek Bangladesh

Intertek certification and testing services in Bangladesh.

BAB Bangladesh Verified

Sponsored listings

Frequently Asked Questions

EN ISO 6142-1:2015/A1:2026 is a draft published by the European Committee for Standardization (CEN). Its full title is "Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures - Amendment 1: Corrections to formulae in Annex E and Annex G (ISO 6142-1:2015/Amd 1:2020)". This standard covers: Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures - Amendment 1: Corrections to formulae in Annex E and Annex G (ISO 6142-1:2015/Amd 1:2020)

Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures - Amendment 1: Corrections to formulae in Annex E and Annex G (ISO 6142-1:2015/Amd 1:2020)

EN ISO 6142-1:2015/A1:2026 is classified under the following ICS (International Classification for Standards) categories: 71.040.40 - Chemical analysis. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 6142-1:2015/A1:2026 has the following relationships with other standards: It is inter standard links to EN ISO 6142-1:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 6142-1:2015/A1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2026
Analiza plinov - Priprava kalibracijskih plinskih zmesi - 1. del: Gravimetrijska
metoda za zmesi razreda I - Dopolnilo A1: Popravki enačb v Dodatku E in Dodatku
G (ISO 6142-1:2015/Amd 1:2020)
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for
Class I mixtures - Amendment 1: Corrections to formulae in Annex E and Annex G (ISO
6142-1:2015/Amd 1:2020)
Gasanalyse - Herstellung von Kalibriergasen - Teil 1: Wägeverfahren für Gemische der
Klasse I - Änderung 1 (ISO 6142-1:2015/Amd 1:2020)
Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Partie 1:
Méthode gravimétrique pour les mélanges de Classe I - Amendement 1: Correction des
formules à l'Annexe E et à l'Annexe G (ISO 6142-1:2015/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 6142-1:2015/prA1
ICS:
71.040.40 Kemijska analiza Chemical analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 6142-1
First edition
2015-08-01
AMENDMENT 1
2020-12
Gas analysis — Preparation of
calibration gas mixtures —
Part 1:
Gravimetric method for Class I
mixtures
AMENDMENT 1: Corrections to formulae
in Annex E and Annex G
Analyse des gaz — Préparation des mélanges de gaz pour
étalonnage —
Partie 1: Méthode gravimétrique pour les mélanges de Classe I
AMENDEMENT 1: Correction des formules à l'Annexe E et à l'Annexe G
Reference number
ISO 6142-1:2015/Amd.1:2020(E)
©
ISO 2020
ISO 6142-1:2015/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 6142-1:2015/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely wi
...