SIST EN ISO 6142-1:2015/oprA1:2026

• Status: Not Published
• Public Enquiry End Date: 01-Oct-2026
• ICS: 71.040.40 - Chemical analysis
• Technical Committee: DPL - Gas supply
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 21-Jul-2026
• Due Date: 08-Dec-2026
• Ref Project: EN ISO 6142-1:2015/prA1 - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures - Amendment 1: Corrections to formulae in Annex E and Annex G (ISO 6142-1:2015/Amd 1:2020)

• Revises: SIST EN ISO 6142-1:2015 - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142- 1:2015)
• Effective Date: 01-Sep-2026

Overview

SIST EN ISO 6142-1:2015/oprA1:2026 is an important standard amendment published by the European Committee for Standardization (CEN), addressing the preparation of calibration gas mixtures using the gravimetric method for Class I mixtures. This amendment, aligned with ISO 6142-1:2015/Amd 1:2020, specifically corrects formulae in Annex E and Annex G, improving the accuracy of calculations critical for gas analysis applications.

Calibration gas mixtures are essential for analytical laboratories, quality assurance, and industries that rely on precise gas measurements. This standard amendment ensures enhanced reliability and traceability in the preparation process by updating key mathematical expressions used in gravimetric calculations.

Key Topics

• Gravimetric method for calibration gas mixtures: Utilized for preparing high-accuracy reference standards for gas analysis.
• Corrections to formulae: Updates and clarifies crucial calculations in Annex E and Annex G, directly affecting the precision of Class I mixture preparation.
• Traceability and accuracy: Reinforces confidence in certified reference materials used for gas analysis across diverse sectors.
• Standardization of gas mixture preparation: Promotes international consistency and comparability in laboratory and industrial environments.

Applications

SIST EN ISO 6142-1:2015/oprA1:2026 plays a pivotal role in several practical applications:

• Analytical laboratories: Enables the preparation of accurate calibration gas mixtures, which are critical for the calibration and validation of analytical instruments like gas chromatographs, mass spectrometers, and other gas analyzers.
• Environmental monitoring: Supports accurate atmospheric measurements by ensuring calibration gases meet international gravimetric standards, helping monitor and control air quality.
• Process industries: Used in sectors such as petrochemicals, energy, and manufacturing, where precise gas mixtures are required for safety, process control, and product quality assurance.
• Compliance and quality assurance: Facilitates adherence to regulatory requirements and industry best practices related to gas mixture preparation and use.
• Research and development: Provides a reliable framework for experimental work that demands highly accurate gas mixture compositions.

Related Standards

For a comprehensive approach to gas analysis and calibration, consider these closely connected standards:

• ISO 6142-1:2015: The core international standard for the gravimetric preparation of calibration gas mixtures, outlining general principles and procedures.
• ISO 6141: Details requirements for the certification and documentation of calibration gas mixtures.
• ISO 6145 (series): Covers various dynamic methods for accurate gas mixture preparations.
• ISO 10723: Focuses on the performance evaluation of gas analysis systems.
• ISO 7504: Specifies terminology and definitions relevant to gas analysis.

Practical Value

Implementing SIST EN ISO 6142-1:2015/oprA1:2026 helps ensure that calibration gas mixtures are prepared with the highest degree of accuracy using updated, internationally recognized methods. This amendment fosters trust in measurement results, supports compliance with quality standards, and underpins safety and reliability in analytical measurements across industries. By maintaining alignment with international best practices, laboratories and organizations benefit from improved process control, data comparability, and regulatory acceptance of their results.

Keywords: EN ISO 6142-1, calibration gas mixtures, gravimetric method, gas analysis standard, formula corrections, analytical laboratories, traceability, process industry, CEN standard, ISO gas analysis.

SLOVENSKI STANDARD
01-september-2026
Analiza plinov - Priprava kalibracijskih plinskih zmesi - 1. del: Gravimetrijska
metoda za zmesi razreda I - Dopolnilo A1: Popravki enačb v Dodatku E in Dodatku
G (ISO 6142-1:2015/Amd 1:2020)
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for
Class I mixtures - Amendment 1: Corrections to formulae in Annex E and Annex G (ISO
6142-1:2015/Amd 1:2020)
Gasanalyse - Herstellung von Kalibriergasen - Teil 1: Wägeverfahren für Gemische der
Klasse I - Änderung 1 (ISO 6142-1:2015/Amd 1:2020)
Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Partie 1:
Méthode gravimétrique pour les mélanges de Classe I - Amendement 1: Correction des
formules à l'Annexe E et à l'Annexe G (ISO 6142-1:2015/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 6142-1:2015/prA1
ICS:
71.040.40 Kemijska analiza Chemical analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 6142-1
First edition
2015-08-01
AMENDMENT 1
2020-12
Gas analysis — Preparation of
calibration gas mixtures —
Part 1:
Gravimetric method for Class I
mixtures
AMENDMENT 1: Corrections to formulae
in Annex E and Annex G
Analyse des gaz — Préparation des mélanges de gaz pour
étalonnage —
Partie 1: Méthode gravimétrique pour les mélanges de Classe I
AMENDEMENT 1: Correction des formules à l'Annexe E et à l'Annexe G
Reference number
ISO 6142-1:2015/Amd.1:2020(E)
©
ISO 2020
ISO 6142-1:2015/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 6142-1:2015/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely wi
...