iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12171:2002

(Main)

Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator

Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator

This standard specifies requirements for providing documents for the operation, mainte-nance and use of heating systems in buildings not requiring a trained operator.
Parts of heating systems covered by this standard are:
- boilers or heat supply equipment, including control;
- safety arrangements, including air supply;
- domestic hot water production facilities;
- energy sources, storage and supply;
- flue gas systems, including condensate treatment and disposal;
- heat distribution network, including associated components;
- heat emitters, including accessories;
- control system;
- water treatments and procedures (e.g. chemical and physical, including antifreeze).

Heizungsanlagen in Gebäuden - Betriebs-, Wartungs- und Bedienungsanleitungen - Heizungsanlagen, die kein qualifiziertes Bedienungspersonal erfordern

Diese Norm legt Anforderungen an eine Dokumentation für Betrieb, Wartung und Bedienung von Heizungsanlagen in Gebäuden fest, bei denen kein für diese Zwecke qualifiziertes Bedienungspersonal erforderlich ist.
Im Rahmen dieser Norm gehören zu einer Heizungsanlage:
¾ Heizkessel oder Einrichtungen zur Wärmeversorgung, Steuerungs- und Regelsysteme;
¾ Sicherheitseinrichtungen, einschließlich Einrichtungen zur Verbrennungsluftzufuhr;
¾ Warmwassererzeugung im Haushalt;
¾ Brennstoffversorgung, -lagerung und -zufuhr;
¾ Abgassysteme, einschliesslich Kondensatbehandlung und -entsorgung;
¾ Einrichtungen zur Wärmeabgabe, einschliesslich zugehöriger Komponenten;
¾ Heizflächen, einschliesslich Zubehör;
¾ Systeme für Steuerung/Regelung und Überwachungssysteme;
¾ Wasseraufbereitung sowie sonstige Behandlungsverfahren für Wasser (z. B. chemische, physikalische oder sonstige Verfahren einschliesslich Behandlungen wegen Frostschutz).

Systèmes de chauffage dans les bâtiments - Instructions de conduite, maintenance et utilisation - Systèmes de chauffage ne requérant pas pour leur conduite l'intervention d'un professionnel

La présente Norme européenne spécifie des exigences relatives aux documents pour la conduite, la maintenance et l'utilisation de systèmes de chauffage dans les bâtiments, ne nécessitant pas un opérateur professionnel pour la conduite.
Les parties de systèmes de chauffage prises en compte dans la présente norme sont les suivantes :
   chaudières ou systèmes de production de chaleur, y compris la régulation ;
   dispositifs de sécurité, y compris l'alimentation en air ;
   installations de production d'eau chaude sanitaire;
   stockage ou alimentation en énergie ;
   conduits de fumée, y compris le recueil et l'évacuation des condensats ;
   réseau de distribution de chaleur, y compris les composants associés ;
   émetteurs de chaleur, y compris leurs accessoires ;
   système de régulation ;
   mode de traitement des eaux (par exemple, chimique, physique, y compris antigel).

Grelni sistemi v stavbah – Postopki za pripravo dokumentov za delovanje, vzdrževanje in uporabo – Grelni sistemi, ki ne zahtevajo usposobljenega upravljavca

General Information

Status
Published
Publication Date
21-May-2002
ICS
91.140.10 - Central heating systems
Technical Committee
CEN/TC 228 - Heating systems in buildings
Drafting Committee
CEN/TC 228/WG 3 - Instructions for operation, maintenance and use
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
03-Mar-2024
Completion Date
03-Mar-2024
Ref Project
SIST EN 12171:2004 - Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator

Buy Standard

EN 12171:2004EN 12171:2004
PreviousNext
Standard
EN 12171:2004
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Grelni sistemi v stavbah – Postopki za pripravo dokumentov za delovanje, vzdrževanje in uporabo – Grelni sistemi, ki ne zahtevajo usposobljenega upravljavcaHeizungsanlagen in Gebäuden - Betriebs-, Wartungs- und Bedienungsanleitungen - Heizungsanlagen, die kein qualifiziertes Bedienungspersonal erfordernSystemes de chauffage dans les bâtiments - Instructions de conduite, maintenance et utilisation - Systemes de chauffage ne requérant pas pour leur conduite l'intervention d'un professionnelHeating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 12171:2002SIST EN 12171:2004en01-februar-2004SIST EN 12171:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12171May 2002ICS 91.140.10English versionHeating systems in buildings - Procedure for the preparation ofdocuments for operation, maintenance and use - Heatingsystems not requiring a trained operatorSystèmes de chauffage dans les bâtiments - Instructionsde conduite, maintenance et utilisation - Systèmes dechauffage ne requérant pas pour leur conduite l'interventiond'un professionnelHeizungsanlagen in Gebäuden - Betriebs-, Wartungs- undBedienungsanleitungen - Heizungsanlagen, die keinqualifiziertes Bedienungspersonal erfordernThis European Standard was approved by CEN on 11 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12171:2002 ESIST EN 12171:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17956:2024(Main)
Energy efficiency classes for technical insulation systems - Calculation method and applications
SIST EN 17956:2024

This document is applicable to technical insulation systems of operational installations in industry and the building services, such as pipes, ducts, vessels, equipment and built-in components.
The document specifies methods for the energy efficiency classification of insulation systems for the abovementioned components with an operational temperature range of −30 °C up to 650 °C.
The document addresses plant operators, engineers of operational installations, as well as the involved contractors such as insulation contractors and pipefitting contractors.
The design of safe surface temperatures for personal protection, as well as the prevention of condensation, is outside the scope of this document.
This document also does not apply to water-based heating and cooling systems in buildings and does not apply to directly buried district heating and district cooling pipes.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-5:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2021)
SIST EN ISO 11855-5:2021

This document establishes requirements for the installation of embedded radiant heating and cooling systems. It specifies general and uniform requirements for the design and construction of heating and cooling floors, ceiling and wall structures to ensure that the heating/cooling systems are suited to the particular application. The requirements specified by this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling surface and which are installed due to the heating/cooling systems.
This document is applicable to water-based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open-air gaps, but are not applicable to panel systems with open-air gaps which are not integrated into the building structure.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-3:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021)
SIST EN ISO 11855-3:2021

This document establishes a system design and dimensioning method to ensure the heating and cooling capacity of the radiant heating and cooling systems.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-4:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2021)
SIST EN ISO 11855-4:2021

This document allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS) – Type V according to ISO 11855-1, based on heat gains, such as solar gains, internal heat gains, and ventilation, and the calculation of the cooling power demand on the water side, to be used to size the cooling system, as regards, e.g. the chiller size, fluid flow rate.
This document defines a detailed method aimed at the calculation of heating and cooling capacity in non-steady state conditions.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-1:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria (ISO 11855-1:2021)
SIST EN ISO 11855-1:2021

This document specifies the basic definitions, symbols, and comfort criteria for embedded radiant heating and cooling systems.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15316-4-2:2017/AC:2017(Corrigendum)
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2
SIST EN 15316-4-2:2018/AC:2018
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12831-1:2017(Main)
Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3
SIST EN 12831-1:2018

This European Standard covers methods for the calculation of the design heat load for single rooms, building entities and buildings, where the design heat load is defined as the heat supply (power) needed to maintain the required internal design temperature under design external conditions.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 -1.
NOTE 1   In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
(...)

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12831-3:2017(Main)
Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
SIST EN 12831-3:2018

This European Standard describes a method to calculate the power and the storage volume required for the dimensioning of domestic hot water systems (DHW). The applicability ranges from direct water heaters (no storage volume and a comparatively large effective heating power) to larger storage systems with a comparatively small heating power and large storage volumes.
This European Standard is applicable to the following water storage systems:
-   storage systems characterized by a minimal mixing zone, (such as stratified charging storage tanks or storage tanks with external heat exchangers): these systems are nominated in this standard as "charging storage systems";
-   storage tank water heaters and warm water storage tanks with a pronounced mixing zone (such as DHW storage tanks with internal heat exchangers), nominated in this standard as "mixed storage systems";
and for different uses.
The Scope also includes standardization methods for determining the energy need for domestic hot water. This European Standard covers the domestic hot water needs in buildings.
The calculation of the energy needs for DHW-Systems applies to residential and non-residential buildings, a building or a zone of a building.
Figure 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 1   In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Table 1 shows the relative position of this standard within the EPB package of standards.
(...)

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15459-1:2017(Main)
Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14
SIST EN 15459-1:2018

This European Standard provides a calculation method for the economic issues of heating systems and other systems that are involved in the energy demand and consumption of the building. It applies to all types of new and existing buildings.
The fundamental principles and terminology are explained in the standard.
The main items of the standard will be:
-   the definitions and the structure of the types of costs which should be taken into account for the calculation of the economic efficiency of saving options in buildings;
-   data needed for definition of costs related to systems under consideration;
-   the calculation method(s);
-   expression of the result of the economic study.
This European Standard is part of the method for calculation of economic performance of energy saving options in buildings (e.g. insulation, better performing generators and distribution systems, efficient lighting, renewable sources, combined heat and power...).
The scope of this specific part is to standardize:
-   the required inputs;
-   the required outputs;
-   the calculation formulas;
-   the type of energy systems concerned with the energy performance of the building.
NOTE 1   This is the revision of EN 15459:2007. The revision has been made consistent with the EU regulation on cost-optimal. This revision includes the definition of payback for investment, and inclusion of the costs due to the deconstruction of the building. The method presenting annualized costs has been suppressed.
NOTE 2   This standard does not consider financial advantages for higher productivity, higher attractiveness for tenants due to higher indoor comfort, when relevant for comparison of different options.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 3   In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 4   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
(...)

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15316-4-1:2017(Main)
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
SIST EN 15316-4-1:2018

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.
This standard (EN 15316 4 1) specifies:
-   required inputs;
-   a calculation method;
-   resulting outputs;
-   a method to take into account the energy performance of heat generation devices based on fuel combustion;
for space heating generation by combustion sub-systems (boilers, biomass), including control.
This standard specifies methods for the calculation of:
-   thermal losses from the heating and the domestic hot water generation system;
-   recoverable thermal losses for space heating from the heating and the domestic hot water generation system;
-   auxiliary energy of the heating and the domestic hot water generation systems.
This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers.
This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8.
This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating. These values are input data for calculation of the overall energy use according to EN ISO 52000 1 and EN 15316 1.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.
NOTE 1   In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day