EN 3475-411:2005

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids

This standard specifies methods of measuring the fluid resistance of a finished cable.
It shall be used together with EN 3475-100, EN 3909 and TR 4542.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 411: Beständigkeit gegen Flüssigkeiten

Diese Norm legt ein Verfahren zur Bestimmung der Beständigkeit einer fertigen Leitung gegen Flüssigkeiten fest.
Sie ist in Verbindung mit EN 3475-100, EN 3909 und TR 4542 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 411 : Résistance aux fluides

Aeronavtika – Električni kabli za uporabo v zračnih plovilih – Preskusne metode – 411. del: Odpornost proti tekočinam

General Information

• Status: Withdrawn
• Publication Date: 15-Nov-2005
• Withdrawal Date: 04-Nov-2014
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-Nov-2014
• Ref Project: SIST EN 3475-411:2006 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids

Relations

• Replaced By: EN 3475-411:2014 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
• Effective Date: 16-Nov-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluidsSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 411 : Résistance aux fluidesLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 411: Beständigkeit gegen FlüssigkeitenTa slovenski standard je istoveten z:EN 3475-411:2005SIST EN 3475-411:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3475-411:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-411November 2005ICS 49.060 English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 411: Resistance to fluidsSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 411 : Résistanceaux fluidesLuft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 411:Beständigkeit gegen FlüssigkeitenThis European Standard was approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-411:2005: E



EN 3475-411:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Test procedures.4 4 Preparation of specimen.5 5 Methods.5 6 Requirements.5



EN 3475-411:2005 (E) 3 Foreword This European Standard (EN 3475-411:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 3475-411:2005 (E) 4 1 Scope This standard specifies methods of measuring the fluid resistance of a finished cable. It shall be used together with EN 3475-100, EN 3909 and TR 4542. 2 Normative references The fo
...