Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons

This European Standard specifies the additional materials, manufacturing and testing requirements to those given in Part 1 for stranded steel wire 'hauling' and 'carrying-hauling' ropes for cableway installations designed to carry persons.
The rope grade is limited to 1960.
Minimum breaking force values for the more common classes, sizes and grades of rope are provided in Tables 2, 3 and 4.
Stranded tension ropes and ski-tow ropes for surface lifts are covered by prEN 12385-4.
The additional hazards covered by this European Standard are identified in clause 4.

Drahtseile aus Stahldraht - Sicherheit - Teil 8: Zug- und Zug-Trag-Litzenseile für Seilebahnen zum Transport von Personen

Dieser Teil dieser Europäischen Norm legt die besonderen Anforderungen an Werkstoffe, Herstellung und Prüfung für Zug  und Zug-Trag-Litzenseile aus Stahldraht für Seilbahnen zur Personenbeförderung fest.
Die besonderen Gefährdungen, die in diesem Teil behandelt werden, sind in Abschnitt 4 angegeben.
Die Obergrenze der Seilfestigkeitsklasse ist 1960.
Werte der Mindestbruchkraft für die gebräuchlicheren Seilklassen, Durchmesser und Seilfestigkeitsklassen sind in den Tabellen 2, 3 und 4 angegeben.
Litzenspannseile und Schleppseile für Skilifte werden in EN 12385 4 behandelt.

Câbles en acier - Sécurité - Partie 8: Câbles tracteurs et porteurs-tracteurs à torons pour les installations destinées au transport de personnes

La présente partie de cette norme européenne spécifie les exigences relatives aux câbles en acier toronnés 'porteurs' et 'porteurs-tracteurs' pour installations de transport à câbles destinées aux personnes (remontées mécaniques). Il convient de la consulter conjointement à la Partie 1 de la présente norme. Les valeurs de charges de rupture minimales pour les classes, les dimensions et les catégories de câble les plus courantes sont fournies dans les tableaux 2, 3 et 4. L'annexe A donne les exigences générales relatives aux lubrifiants.

Jeklene žične vrvi - Varnost - 8. del: Vlečne in transportne pramenaste vrvi za žičniške naprave za prevoz oseb

General Information

Publication Date
Withdrawal Date
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
Completion Date

Buy Standard

EN 12385-8:2003
English language
18 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry personsCâbles en acier - Sécurité - Partie 8: Câbles tracteurs et porteurs-tracteurs a torons pour les installations destinées au transport de personnesDrahtseile aus Stahldraht - Sicherheit - Teil 8: Zug- und Zug-Trag-Litzenseile für Seilebahnen zum Transport von PersonenTa slovenski standard je istoveten z:EN 12385-8:2002SIST EN 12385-8:2003en77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:SLOVENSKI
STANDARDSIST EN 12385-8:200301-maj-2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12385-8October 2002ICS 77.140.65English versionSteel wire ropes - Safety - Part 8: Stranded hauling andcarrying-hauling ropes for cableway installations designed tocarry personsCâbles en acier - Sécurité - Partie 8: Câbles tracteurs etporteurs-tracteurs à torons pour les installations destinéesau transport de personnesDrahtseile aus Stahldraht - Sicherheit - Teil 8: Zug- undZug-Trag-Litzenseile für Seilebahnen zum Transport vonPersonenThis European Standard was approved by CEN on 16 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12385-8:2002 E

General requirements for lubricants.13Annex B (normative)
Method of test for determination of waviness.14Annex C (normative)
Calculations of minimum breaking force and approximate nominal length massfor ropes covered by Tables 2 to 4.15Annex D (informative)
Information which should be provided with an enquiry or order.16Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.17Bibliography.18

WireWires before ropemaking shall conform to EN 10264-3.The tensile strength grades of the wires shall be subjected to the limits given in Table 1.Table 1 — Wire tensile strength grades excluding centre and filler wires for given rope gradesRope gradeWire tensile strength grade, N/mm2MinimumMaximum1570137017701770157019601960177021605.2.2 CoreThe core shall be one of the following typesa) fibre;b) solid polymer;c) non-magnetic metallic covered with solid polymer;d) steel covered with solid polymer;e) steel, as an independent wire rope (IWRC) or wire strand (WSC).5.2.3 LubricantThe properties of the lubricant shall conform with the requirements of annex A.NOTEThe purchaser should specify any particular lubricant (see Introduction).

one of those covered by the three classes given in Tables 2 to 4; or b)
another single layer rope construction as specified by the manufacturer and covered by the respectiveclasses in EN 12385-2.NOTEStrands can be compacted.5.3.3 Rope gradeThe rope grade shall be not less than 1570 or higher than 1960.NOTEThe rope grades are generally 1570, 1770 or 1960 although intermediate rope grades can also be specified.For the more common classes of ropes, refer to Tables 2 to 4, the rope grade shall be used in the calculation ofbreaking force. (See annex C).5.3.4 WavinessRopes shall be measured for waviness in accordance with annex B. The amount of waviness measured over a lengthequivalent to 3 rope lay lengths shall be not more than 0,01 d + 0,2 mm.5.4
Diameter5.4.1 TolerancesWhen measured in accordance with 6.7 the actual diameter shall be within + 1 % and + 5 % of the nominal diameterwith the rope under load on the closing machine.5.4.2 Differences between diameter measurementsThe difference between any two of the four measurements taken in accordance with 6.7 and expressed as apercentage of nominal diameter shall not exceed 4 %.

Length massThe manufacturer shall specify the nominal length mass.NOTEThe values in Tables 2 to 4 are approximate. More precise values can be specified by the manufacturer.When measured in accordance with 6.9 the length mass shall be in accordance with the specified value, subject to atolerance of - 2 % to + 5 %.5.7 Designation and classificationRope designation and classification shall conform to EN 12385-2.

96,11521711901810817019221319120190214237201332102372632114723226129022161255287318231752783143472419230334237825208329371410262253564014442724238343247928261412465515292804424995523029947353459131320505570631323405396076721) Informative only

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.