EN ISO 15912:2006

Dentistry - Casting investments and refractory die materials (ISO 15912:2006)

ISO 15912:2006 is applicable to dental casting, brazing and refractory investments and refractory die materials, regardless of the nature of the binding system or the particular application.
ISO 15912:2006 classifies investments into types according to their intended use and classes according to the burn-out procedure recommended by the manufacturer.
ISO 15912:2006 specifies requirements for the essential physical and mechanical properties of the materials and the test methods used to determine them.
ISO 15912:2006 also includes requirements for the information and instructions which accompany each package.

Zahnheilkunde - Einbettmassen und hochtemperaturbeständige Stumpfmaterialien (ISO 15912:2006)

Die vorliegende Internationale Norm gilt für dentale Guss-, Löt- und hitzebeständige Einbettmassen sowie für hochtemperatur¬beständige Stumpfmaterialien, unabhängig von der Art der Bindersubstanz oder der speziellen Anwendung.
Diese Internationale Norm teilt die Einbettmassen aufgrund der vorgesehenen Anwendung in vier Typen und entsprechend dem empfohlenen Vorwärmverfahren in zwei Klassen ein.
Diese Internationale Norm legt Anforderungen an die wesentlichen physikalischen und mechanischen Eigen¬schaften der Materialien sowie an die bei der Bestimmung anzuwendenden Prüfverfahren fest.
Diese Internationale Norm enthält auch Anforderungen an die mit jeder Packung zur Verfügung zu stellenden Angaben und Gebrauchsanweisungen.

Art dentaire - Revêtements et matériaux pour modèles réfractaires (ISO 15912:2006)

L'ISO 15912:2006 s'applique aux revêtements dentaires à couler, pour le brasage et aux revêtements réfractaires et aux produits pour les modèles réfractaires, quelle que soit la nature du système de liant ou l'application spécifique.
L'ISO 15912:2006 organise les revêtements en différents types selon leur utilisation prévue et en catégories selon le mode opératoire de chauffe recommandé par le fabricant.
L'ISO 15912:2006 spécifie les exigences des propriétés physiques et mécaniques essentielles des matériaux et les méthodes d'essai à utiliser pour les déterminer.
L'ISO 15912:2006 inclut également les exigences relatives aux informations et aux instructions qui accompagnent chaque emballage.

Zobozdravstvo - Polnila in refrakcijski materiali (ISO 15912:2006)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2006
• Withdrawal Date: 09-Feb-2016
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Feb-2016
• Ref Project: SIST EN ISO 15912:2006 - Dentistry - Casting investments and refractory die materials (ISO 15912:2006)

Relations

• Replaced By: EN ISO 15912:2016 - Dentistry - Refractory investment and die material (ISO 15912:2016)
• Effective Date: 05-Jun-2013
• Amended By: EN ISO 15912:2006/A1:2011 - Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/Amd 1:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15912:2006
01-december-2006
Zobozdravstvo - Polnila in refrakcijski materiali (ISO 15912:2006)
Dentistry - Casting investments and refractory die materials (ISO 15912:2006)
Zahnheilkunde - Einbettmassen und hochtemperaturbeständige Stumpfmaterialien (ISO
15912:2006)
Art dentaire - Revetements et matériaux pour modeles réfractaires (ISO 15912:2006)
Ta slovenski standard je istoveten z: EN ISO 15912:2006
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 15912:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 15912
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2006
ICS 11.060.10

English Version
Dentistry - Casting investments and refractory die materials (ISO
15912:2006)
Art dentaire - Revêtements et matériaux pour modèles Zahnheilkunde - Einbettmassen und
réfractaires (ISO 15912:2006) hochtemperaturbeständige Stumpfmaterialien (ISO
15912:2006)
This European Standard was approved by CEN on 29 September 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15912:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 15912:2006 (E)





Foreword


This document (EN ISO 15912:2006) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of
which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2007, and conflicting national
standards shall be withdrawn at the latest by April 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 15912:2006 has been approved by CEN as EN ISO 15912:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 15912
First edition
2006-10-01

Dentistry — Casting investments and
refractory die materials
Art dentaire — Revêtements et matériaux pour modèles réfractaires




Reference number
ISO 15912:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 15912:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic
...