Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls

This document specifies the characteristics of flexible sheets for underlays for walls which are to be used in walls behind outside wall coverings in order to avoid penetration of wind and water from outside. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.

Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für Wände

Dieses Dokument legt Eigenschaften für Unterdeck- und Unterspannbahnen für Wände fest, die hinter außenseitigen Wandverkleidungen zu verlegen sind, um das Eindringen von Wind und Wasser von außen zu verhindern. Sie enthält Festlegungen der Anforderungen und Prüfverfahren sowie der Bewertung der Konformität von Produkten nach den Anforderungen dieses Dokumentes.

Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs extérieurs

La présente Norme européenne spécifie les caractéristiques des écrans souples pare-pluie, destinés à être utilisés derrière l'habillage des murs extérieur, afin d'éviter la pénétration du vent et de l'eau venant de l'extérieur. Elle exprime les spécifications et les méthodes d'essai destinées à évaluer la conformité des produits avec les prescriptions du présent document.

Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za stene

General Information

Status
Withdrawn
Publication Date
30-Nov-2004
Withdrawal Date
30-Sep-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2008
Completion Date
01-Oct-2008

Relations

Buy Standard

Standard
EN 13859-2:2005
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za steneAbdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für WändeFeuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs extérieursFlexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13859-2:2004SIST EN 13859-2:2005en01-maj-2005SIST EN 13859-2:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13859-2December 2004ICS 01.040.91; 91.100.50English versionFlexible sheets for waterproofing - Definitions and characteristicsof underlays - Part 2: Underlays for wallsFeuilles souples d'étanchéité - Définitions etcaractéristiques des sous-couches - Partie 2: Sous-couches pour murs et cloisons extérieursAbdichtungsbahnen - Definitionen und Eigenschaften vonUnterdeck- und Unterspannbahnen - Teil 2: Unterdeck- undunterspannbahnen für WändeThis European Standard was approved by CEN on 20 October 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13859-2:2004: ESIST EN 13859-2:2005

Determination of tensile properties.13 Annex B (normative)
Determination of resistance to tearing.16 Annex C (normative)
Artificial ageing by exposure to UV and heat.18 SIST EN 13859-2:2005

Initial type test and frequencies of testing for factory production control.21 Annex E (informative)
Example of a product data sheet.23 Annex ZA (informative)
Clauses of this European Standard addressing provision of the Construction Products Directive (CPD).25 Bibliography.32
— Part 1: Bitumen sheets for roof waterproofing — Determination of dimensional stability EN 1107-2, Flexible sheets for waterproofing — Determination of dimensional stability — Part 2: Plastic and rubber sheets for roof waterproofing EN 1109, Flexible sheets for waterproofing — Bitumen sheets for roof waterproofing — Determination of flexibility at low temperature EN 1296, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roofing — Method of artificial ageing by long term exposure to elevated temperature EN 1297, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water EN 1848-1, Flexible sheets for waterproofing — Determination of length, width, and straightness — Part 1: Bitumen sheets for roof waterproofing EN 1848-2, Flexible sheets for waterproofing — Determination of length, width, straightness and flatness — Part 2: Plastic and rubber sheets for roof waterproofing EN 1849-1, Flexible sheets for waterproofing — Determination of thickness and mass per unit area — Part 1: Bitumen sheets for roof waterproofing EN 1849-2, Flexible sheets for waterproofing — Determination of thickness and mass per unit area — Part 2: Plastic and rubber sheets for roof waterproofing EN 1928:2001, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of watertightness EN 1931, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of water vapour transmission properties EN 12114, Thermal performance of buildings — Air permeability of building components and building elements — Laboratory test method EN 12310-1:1999, Flexible sheets for waterproofing — Part 1: Bitumen sheets for waterproofing — Determination of resistance to tearing (nail shank) EN 12311-1, Flexible sheets for waterproofing — Part 1: Bitumen sheets for roof waterproofing — Determination of tensile properties SIST EN 13859-2:2005
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.