Windows - Determination of the resistance to racking

This European Standard specifies the determination of resistance to racking of an open casement or sash
expressed as loads and the resulting maximum and residual deformations.
This European Standard applies to the opening modes specified in Figure A.1 to Figure A.6 and included in
EN 12519.

Fenster - Ermittlung der Widerstandsfähigkeit gegen Lasten in der Flügelebene (Racking)

Fenêtres - Détermination de la résistance à une charge verticale (contreventement)

La présente norme spécifie la détermination de la résistance au contreventement du vantail d'une fenêtre ouvrante, exprimée en termes de charges et de résultats maximaux et de déformations résiduelles.
La présente norme s'applique aux modes d'ouverture définis de la Figures A.1 à la Figure A.6 et inclus dans l'EN 12519.

Okna – Ugotavljanje odpornosti proti navpični obremenitvi

General Information

Status
Published
Publication Date
08-Jun-2004
Withdrawal Date
30-Dec-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
10-Jan-2023

Buy Standard

Standard
EN 14608:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2004
2NQD±8JRWDYOMDQMHRGSRUQRVWLSURWLQDYSLþQLREUHPHQLWYL
Windows - Determination of the resistance to racking
Fenster - Ermittlung der Widerstandsfähigkeit gegen Lasten in der Flügelebene
(Racking)
Fenetres - Détermination de la résistance a une charge verticale (contreventement)
Ta slovenski standard je istoveten z: EN 14608:2004
ICS:
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 14608
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2004
ICS 91.060.50
English version
Windows - Determination of the resistance to racking
Fenetrês - Détermination de la résistance à une charge Fenster - Ermittlung der Widerstandsfähigkeit gegen
verticale (contreventement) Lasten in der Flügelebene (Racking)
This European Standard was approved by CEN on 1 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14608:2004: E
worldwide for CEN national Members.

Contents
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Apparatus.4
5 Test specimen.4
6 Conditioning and preparation of the test specimen .5
6.1 Conditioning.5
6.2 Preparation.5
7 Procedure.5
8 Expression of results.5
9 Test report.5
Annex A (normative) Figures .6

Foreword
This document (EN 14608:2004) has been prepared by Technical Committee CEN/TC 33 “Doors, windows,
shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest
by December 2004.
It is part of a series of standards for windows.
This document supersedes 8.2.2 Racking of EN 107:1980.
Annex A is normative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.