EN 3545-009:2008

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 009: Protective cover for plug and receptacle - Product standard

This standard specifies the characteristics of protective cover for plug and receptacle in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from - 55 °C to 175 °C.
The protective covers are not able to ensure a sealing in immersion condition.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 009: Schutzkappe für festen und freien Steckverbinder - Produktnorm

Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 009 : Capot de protection pour fiche et embase - Norme de produit

Aeronavtika - Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastično ohišje, zaporni mehanizem, delovna temperatura med – 55 °C in 175 °C - 009. del: Zaščitna kapa za vtič in dozo - Standard za proizvod

General Information

• Status: Published
• Publication Date: 03-Jun-2008
• Withdrawal Date: 30-Dec-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3545-009:2008 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 009: Protective cover for plug and receptacle - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3545-009:2008
01-september-2008
$HURQDYWLND.RQHNWRUMLHOHNWULþQLSUDYRNRWQLVWHVQLOQRNDSRDOLEUH]QMH
SODVWLþQRRKLãMH]DSRUQLPHKDQL]HPGHORYQDWHPSHUDWXUDPHG±ƒ&LQƒ&
GHO=DãþLWQDNDSD]DYWLþLQGR]R6WDQGDUG]DSURL]YRG
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 009:
Protective cover for plug and receptacle - Product standard
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere
Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
175 °C - Teil 009: Schutzkappe für festen und freien Steckverbinder - Produktnorm
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à
l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C
- Partie 009: Capot de protection pour fiche et embase - Norme de produit
Ta slovenski standard je istoveten z: EN 3545-009:2008
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3545-009:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 3545-009

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2008
ICS 49.060
English Version
Aerospace series - Connectors, electrical, rectangular, with
sealed and non-sealed rear, plastic housing, locking device,
operating temperatures - 55 °C to 175 °C - Part 009: Protective
cover for plug and receptacle - Product standard
Série aérospatiale - Connecteurs électriques, Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder
rectangulaires, étanches et non étanches à l'arrière, à
mit und ohne hintere Abdichtung, Plastikgehäuse,
boîtier en plastique, à verrouillage, températures Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
d'utilisation - 55 °C à 175 °C - Partie 009 : Capot de 175 °C - Teil 009: Schutzkappe für festen und freien
protection pour fiche et embase - Norme de produit Steckverbinder - Produktnorm
This European Standard was approved by CEN on 14 March 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3545-009:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3545-009:2008 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics.4
5 Designation .6
6 Marking .7
7 Technical specification .7

2

--------
...