EN 14118-1:2003

Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation

1.1   This part 1 of EN 14118 establishes a method of designation for chopped strand and continuous filament mats made from textile glass strands, which may be used as the basis for specifications.
1.2   This designation system is for chopped strand an continuous filament mats used for the reinforcement of plastics and hydraulic matrices.
It does not apply to mats made from staple fibres, nor to mechanical or stitched bonded materials and to veils.
1.3   It is not intended to imply that mats having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of mats. This part 1 of EN 14118 does not give engineering data, performance data or data which may be required to specify chopped strand and continuous filament mats for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 14118-2.

Verstärkungsprodukte - Spezifikation für Textilglasmatten (Glasseiden- und Endlosmatten) - Teil 1: Bezeichnung

Renfort - Spécifications des mats de verre textile (mats à fils coupés et mats à fils continus) - Partie 1: Désignation

Ojačitve – Specifikacije za steklene tkanine (iz sekanih in neskončnih vlaken) - 1. del: Označevanje

General Information

• Status: Published
• Publication Date: 11-Feb-2003
• Withdrawal Date: 30-Aug-2003
• ICS: 59.100.10 - Textile glass materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 2/WG 1 - Reinforcements
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 03-Dec-2022
• Ref Project: SIST EN 14118-1:2003 - Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14118-1:2003
01-julij-2003
2MDþLWYH±6SHFLILNDFLMH]DVWHNOHQHWNDQLQHL]VHNDQLKLQQHVNRQþQLKYODNHQ
GHO2]QDþHYDQMH
Reinforcement - Specifications for textile glass mats (chopped strand and continuous
filament mats) - Part 1: Designation
Verstärkungsprodukte - Spezifikation für Textilglasmatten (Glasseiden- und
Endlosmatten) - Teil 1: Bezeichnung
Renfort - Spécifications des mats de verre textile (mats a fils coupés et mats a fils
continus) - Partie 1: Désignation
Ta slovenski standard je istoveten z: EN 14118-1:2003
ICS:
59.100.10 Materiali iz steklenih vlaken Textile glass materials
SIST EN 14118-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14118-1:2003

---------------------- Page: 2 ----------------------

SIST EN 14118-1:2003
EUROPEAN STANDARD
EN 14118-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2003
ICS 59.100.10
English version
Reinforcement - Specifications for textile glass mats (chopped
strand and continuous filament mats) - Part 1: Designation
Renfort - Spécifications des mats de verre textile (mats à Verstärkungsprodukte - Spezifikation für Textilglasmatten
fils coupés et mats à fils continus) - Partie 1: Désignation (Glasseiden- und Endlosmatten) - Teil 1: Bezeichnung
This European Standard was approved by CEN on 28 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14118-1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14118-1:2003
EN 14118-1:2003 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Designation System .4
5 Coding Example.5
2

---------------------- Page: 4 ----------------------

SIST EN 14118-1:2003
EN 14118-1:2003 (E)
Foreword
This document (EN 14118-1:2003) has been prepared by Technical Committee CEN/TC 249
"Plastics", the secretariat of which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2003, and conflicting national standards shall
be withdrawn at the latest by August 2003.
This standard is one part of EN 14118 which is structured as follows:
Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament
mats) – Part 1 : Designation
Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament
mats) – Part 2 : Methods of test and general requirements
Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament
mats) – Part 3 : Specific requirements
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It
...