Reinforcements - Specification for textile glass rovings - Part 1: Designation

This part of this European Standard establishes a method of designation for roving made from continuous filament textile glass strands, which may be used as the basis for specifications.
This designation system is for roving used for the reinforcement of plastics and hydraulic matrices, and the manufacture of woven materials.
It does not apply to roving made from staple fibres.
It is not intended to imply that roving having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of roving. This part of this European Standard  does not give engineering data, performance data or data which may be required to specify roving for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in Part 2 of EN 14020.

Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 1: Bezeichnung

Renforts - Spécification des stratifils (rovings) de verre textile - Partie 1: Désignation

Ojačitve - Specifikacije za snopiče (roving) steklenih vlaken - 1. del: Označevanje

General Information

Status
Published
Publication Date
03-Dec-2002
Technical Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2022

Buy Standard

Standard
EN 14020-1:2003
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 1: BezeichnungRenforts - Spécification des stratifils (rovings) de verre textile - Partie 1: DésignationReinforcements - Specification for textile glass rovings - Part 1: Designation59.100.10Materiali iz steklenih vlakenTextile glass materialsICS:Ta slovenski standard je istoveten z:EN 14020-1:2002SIST EN 14020-1:2003en01-maj-2003SIST EN 14020-1:2003SLOVENSKI
STANDARD



SIST EN 14020-1:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14020-1December 2002ICS 59.100.10English versionReinforcements - Specification for textile glass rovings - Part 1:DesignationRenforts - Spécification des stratifils (rovings) de verretextile - Partie 1: DésignationVerstärkungsfasern - Spezifikation für Textilglasrovings -Teil 1: BezeichnungThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14020-1:2002 ESIST EN 14020-1:2003



EN 14020-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Designation system.55Coding examples.6Bibliography.7SIST EN 14020-1:2003



EN 14020-1:2002 (E)3ForewordThis document (EN 14020-1:2002) has been prepared by Technical Committee CEN /TC 249 "Plastics", thesecretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest byJune 2003.This document is one part of EN 14020 which is structured as follows:¾ Part 1 : Designation¾ Part 2 : Test methods and general requirements¾ Part 3 : Specific requirementsAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 14020-1:2003



EN 14020-1:2002 (E)41 ScopeThis part of this European Standard establishes a method of designation for roving made from continuous filamenttextile glass strands, which may be used as the basis for specifications.This designation system is for roving used for the reinforcement of plastics and hydraulic matrices, and themanufacture of woven materials.It does not apply to roving made from staple fibres.It is not intended to imply that roving having the same designation give necessarily the same performance. Nor isthe designation system intended to cover all the characteristics of roving. This part of this European Standard
doesnot give engineering data, performance data or
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.