iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 2078:2022

(Main)

Textile glass - Yarns - Designation (ISO 2078:2022)

Textile glass - Yarns - Designation (ISO 2078:2022)

This document specifies a system of designating textile glass yarns (including single, multiple-wound, folded (plied), cabled and textured yarns, strands, slivers and rovings) based on their linear density expressed in the tex system.

Textilglas - Garne - Bezeichnung (ISO 2078:2022)

Dieses Dokument legt ein Bezeichnungssystem für Textilglasgarne (einschließlich einfacher und gefachter Garne, einstufiger und mehrstufiger Zwirne, texturierter Garne, Spinnfäden, Stapelfaser-Vorgarnen und Rovings), das auf ihrer Feinheit im Tex-System beruht, fest.

Verre textile - Fils - Désignation (ISO 2078:2022)

Le présent document spécifie un système de désignation des fils de verre textile (fils simples, assemblés, retors, câblés et texturés, fils de base, rubans et stratifils) à l’aide de la masse linéique, exprimée dans le système Tex.

Steklena vlakna - Preja - Označevanje (ISO 2078:2022)

Ta dokument določa sistem označevanja preje iz steklenih vlaken (vključno z enojno, večkratno pleteno,
zgibano (sukano), kablano in teksturirano prejo, vrvmi, trakovi preje in predprejo) na podlagi njihove dolžinske mase,
izražene v sistemu tex.

General Information

Status
Published
Publication Date
29-Mar-2022
Withdrawal Date
29-Sep-2022
ICS
59.100.10 - Textile glass materials
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249 - Plastics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Mar-2022
Completion Date
30-Mar-2022
Ref Project
SIST EN ISO 2078:2022 - Textile glass - Yarns - Designation (ISO 2078:2022)

Relations

Replaces
EN ISO 2078:1994/A1:2015 - Textile glass - Yarns - Designation - Amendment 1 (ISO 2078:1993/Amd 1:2015)
Effective Date
08-Jun-2022
Replaces
EN ISO 2078:1994 - Textile glass - Yarns - Designation (ISO 2078:1993)
Effective Date
06-Apr-2022

Buy Standard

EN ISO 2078:2022EN ISO 2078:2022
PreviousNext
Standard
EN ISO 2078:2022
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2078:2022
01-maj-2022
Nadomešča:
SIST EN ISO 2078:1999
SIST EN ISO 2078:1999/A1:2016
Steklena vlakna - Preja - Označevanje (ISO 2078:2022)
Textile glass - Yarns - Designation (ISO 2078:2022)
Textilglas - Garne - Bezeichnung (ISO 2078:2022)
Verre textile - Fils - Désignation (ISO 2078:2022)
Ta slovenski standard je istoveten z: EN ISO 2078:2022
ICS:
59.100.10 Materiali iz steklenih vlaken Textile glass materials
SIST EN ISO 2078:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 2078:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 2078:2022


EN ISO 2078
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2022
EUROPÄISCHE NORM
ICS 59.100.10 Supersedes EN ISO 2078:1994, EN ISO
2078:1994/A1:2015
English Version

Textile glass - Yarns - Designation (ISO 2078:2022)
Verre textile - Fils - Désignation (ISO 2078:2022) Textilglas - Garne - Bezeichnung (ISO 2078:2022)
This European Standard was approved by CEN on 4 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2078:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 2078:2022
EN ISO 2078:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 2078:2022
EN ISO 2078:2022 (E)
European foreword
This document (EN ISO 2078:2022) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2078:1994.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 2078:2022 has been approved by CEN as EN ISO 2078:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 2078:2022

---------------------- Page: 6 ----------------------
SIST EN ISO 2078:2022
INTERNATIONAL ISO
STANDARD 2078
Sixth edition
2022-03
Textile glass — Yarns — Designation
Verre textile — Fils — Désignation
Reference number
ISO 2078:2022(E)
© ISO 2022

---------------------- Page: 7 ----------------------
SIST EN ISO 2078:2022
ISO 2078:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserve
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9163:2005(Main)
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
SIST EN ISO 9163:2005

ISO 9163:2005 specifies two methods for the determination of the tensile stress at break of an impregnated roving:
a reference method using test specimens produced with moulded epoxy tabs;a short method using test specimens with no tabs or simple cardboard or composite tabs.
The methods are applicable to both assembled (multistrand) and direct (multifilament) rovings; nevertheless the reference method may be used for various linear densities, but the short method is described for 1200 tex rovings only, which is the linear density that allows the roving to spread out most easily to give a flat tape.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14118-1:2003(Main)
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
SIST EN 14118-1:2003

1.1   This part 1 of EN 14118 establishes a method of designation for chopped strand and continuous filament mats made from textile glass strands, which may be used as the basis for specifications.
1.2   This designation system is for chopped strand an continuous filament mats used for the reinforcement of plastics and hydraulic matrices.
It does not apply to mats made from staple fibres, nor to mechanical or stitched bonded materials and to veils.
1.3   It is not intended to imply that mats having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of mats. This part 1 of EN 14118 does not give engineering data, performance data or data which may be required to specify chopped strand and continuous filament mats for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 14118-2.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14118-3:2003(Main)
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
SIST EN 14118-3:2003

This part 3 of EN 14118 provides the technical specification for chopped strands and continuous filaments mats covered by the part 1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14118-2:2003(Main)
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
SIST EN 14118-2:2003

This part 2 of EN 14118 provides the list of test methods and general requirements for chopped strand and continuous filament mats covered by the part 1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14020-3:2002(Main)
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
SIST EN 14020-3:2003

This part of this European Standard gives a technical specification for rovings that are made from continuous filament textile glass. It defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
The parameters which shall always be defined in any roving specification are defined in clause 4.1 and 4.2. The other parameters which are included in a specification shall either be nominated by the manufacturer or agreed between manufacturer and customer. These parameters are defined in clause 4.3.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14020-2:2002(Main)
Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
SIST EN 14020-2:2003

This part of this European Standard defines test methods to be used to determine designated and specified properties given in Part 1 and 3, respectively. It defines general requirements applicable to the specification of all types of glass fibre rovings falling within the scope of this specification as defined in Part 1 of the standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14020-1:2002(Main)
Reinforcements - Specification for textile glass rovings - Part 1: Designation
SIST EN 14020-1:2003

This part of this European Standard establishes a method of designation for roving made from continuous filament textile glass strands, which may be used as the basis for specifications.
This designation system is for roving used for the reinforcement of plastics and hydraulic matrices, and the manufacture of woven materials.
It does not apply to roving made from staple fibres.
It is not intended to imply that roving having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of roving. This part of this European Standard  does not give engineering data, performance data or data which may be required to specify roving for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in Part 2 of EN 14020.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12971-1:1999(Main)
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
SIST EN 12971-1:2000

1.1 This part 1 of EN 12971 establishes a method of designation for chopped strands made from continuous filament textile glass strands, which may be used as the basis for specifications. 1.2 This designation system is for chopped strands used for the reinforcement of plastics and the manufacture of synthetic bonded non-woven materials. It does not apply to chopped strands made from staple fibres.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12971-2:1999(Main)
Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
SIST EN 12971-2:2000

1.1 This part 2 of EN 12971 defines the test methods to be used to determine the designated and specified properties given in part 1 and 3 respectively. 1.2 This part 2 of EN 12971 defines the general requirements applicable to the specification of all types of chopped strand falling within the scope of this specification as defined in part 1 of the standard.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12971-3:1999(Main)
Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
SIST EN 12971-3:2000

1.1 This part 3 of EN 12971 gives a specification for chopped strands made from continuous filament textile glass. The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method. 1.2 The specification does not define absolute or nominal values for any parameter.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day