EN 1340:2003/AC:2006

Concrete kerb units - Requirements and test methods

TC - Various modifications throughout text

Bordsteine aus Beton - Anforderungen und Prüfverfahren

Bordures en béton - Prescriptions et méthodes d'essai

Betonski robniki - Zahteve in preskusne metode

General Information

• Status: Published
• Publication Date: 16-May-2006
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 178 - Paving units and kerbs
• Drafting Committee: CEN/TC 178/WG 1 - Precast concrete products
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 17-May-2006
• Completion Date: 17-May-2006
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 1340:2003/AC:2006 - Concrete kerb units - Requirements and test methods

Relations

• Corrects: EN 1340:2003 - Concrete kerb units - Requirements and test methods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Betonski robniki - Zahteve in preskusne metodeBordsteine aus Beton - Anforderungen und PrüfverfahrenBordures en béton - Prescriptions et méthodes d'essaiConcrete kerb units - Requirements and test methods93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 1340:2003/AC:2006SIST EN 1340:2003/AC:2006en01-december-2006SIST EN 1340:2003/AC:2006SLOVENSKI
STANDARD



SIST EN 1340:2003/AC:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1340:2003/ACMay 2006Mai 2006Mai 2006ICS 93.080.20English versionVersion FrançaiseDeutsche FassungConcrete kerb units - Requirements and test methodsBordures en béton - Prescriptions etméthodes d'essaiBordsteine aus Beton - Anforderungen undPrüfverfahrenThis corrigendum becomes effective on 17 May 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 17 mai 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 17.Mai 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 1340:2003/AC:2006 D/E/FSIST EN 1340:2003/AC:2006



EN 1340:2003/AC:2006 (E/F/D) 2
English version
Title page
In the French title, delete 'de trottoir'.
Contents
Insert the sub-clause numbers and indent the titles in clause 6.1 and D.7.
Delete the second 'Annex ZA' in the title of this annex.
Foreword
Move the last paragraph above 'No existing European Standard is superseded', to become the fifth paragraph.
Clause 3.1
Amend the definition to read:
concrete curb unit
precast concrete unit, individually or in combination with other units, intended to separate surfaces of the same or of different levels to provide physical or visual delineation or containment and separation between areas submitted to different kinds of traffic'.
Clause 3.12
Amend the definition to read:
secondary processing manufacturing process to texture the whole kerb or any surface, carried out after basic manufacture before or after hardening
Clause 5.2.3.2
At the end of the first paragraph, insert '(see Figure 5)'.
Clause 5.3.1
In the second paragraph, last line, replace 'confirming to' with 'complying with'.
Table 2.1
In the second row, delete 'as a mean'.
Clause 5.3.4.2
Amend the title of this sub-clause to read: 'Performance and classes'.
Clause 6
Delete 'criteria' in the title of this clause.
Table 6
In the third and fifth row, in the column 'Conformity criteria', add 'for the declared class'.
SIST EN 1340:2003/AC:2006



EN 1340:2003/AC:2006 (E/F/D) 3 Clause 6.3.8.1
At the end of sub-clause B, add a new paragraph to read: 'If the sample and the corresponding production are not accepted, 6.3.7 applies.'
Clause 6.3.8.3
Sub-clause A, item b), second line, insert after 'declared class': 'but not lower than the minimum value of Table 3 for the declared class
...