EN 1343:2012
(Main)Kerbs of natural stone for external paving - Requirements and test methods
Kerbs of natural stone for external paving - Requirements and test methods
This European Standard specifies the performance requirements and the corresponding test methods for all natural stone kerbs used for external paving and road finishes.
External paving use includes all pavements typical of road works, such as pedestrian and trafficked areas, outdoor squares and similar to be used in an outdoor condition that are subject to the weathering agents, such as temperature changes, rain, ice, wind, etc.
This European Standard provides also for the evaluation of conformity and for marking of the natural stone slabs.
This European Standard also covers characteristics that are of importance to the trade.
Bordsteine aus Naturstein für Außenbereiche - Anforderungen und Prüfverfahren
Diese Europäische Norm legt die Leistungsanforderungen und die entsprechenden Prüfverfahren für
Bordsteine aus Naturstein für Außenbereiche und Straßenbefestigungen fest.
Die Verwendung in Außenbereichen umfasst alle für den Straßenbau typischen Straßenbeläge, beispielsweise
Fußgängerbereiche und Verkehrsflächen, Außenflächen und ähnliche Bereiche, die unter Außenbedingungen
verwendet werden und Verwitterungsfaktoren, wie z. B. Temperaturänderungen, Regen, Eis,
Wind usw. unterliegen.
Diese Europäische Norm ermöglicht ebenfalls die Konformitätsbewertung und die Kennzeichnung der Bordsteine
aus Naturstein.
Diese Europäische Norm behandelt ebenfalls charakteristische Merkmale, die für den Handel von Bedeutung
sind.
Bordures de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essai
La présente Norme européenne spécifie les exigences de performances et les méthodes d'essai correspondantes, relatives à toutes les bordures de pierre naturelle utilisées en revêtement de sol extérieur et de route.
L'utilisation en extérieur du pavage comprend tous les types de revêtement utilisés pour les travaux routiers, tels que les zones de circulation des piétons et des véhicules, les espaces extérieurs et assimilés devant être utilisés dans les conditions extérieures, qui sont exposés aux facteurs climatiques tels que les variations de température, la pluie, la glace, le vent, etc.
Elle spécifie le marquage et l'évaluation de conformité du produit à la présente Norme européenne.
La présente Norme européenne précise également des caractéristiques importantes sur le plan commercial.
Robniki iz naravnega kamna za zunanje tlakovanje - Zahteve in preskusne metode
Ta evropski standard določa zahteve glede zmogljivosti in pripadajoče preskusne metode za vse robnike iz naravnega kamna, ki se uporabljajo za zunanje tlakovanje in zaključno tlakovanje cest. Zunanje tlakovanje vključuje vse voziščne konstrukcije, ki so značilne za zunanje tlakovanje območij, kot so območja za pešce in promet, zunanji trgi in podobna območja, in so izpostavljene vremenskim vplivom, kot so spremembe temperature, dež, led, veter idr. Ta evropski standard podaja tudi oceno skladnosti in označevanje plošč iz naravnega kamna. Ta evropski standard pokriva tudi značilnosti, ki so pomembne v panogi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Robniki iz naravnega kamna za zunanje tlakovanje - Zahteve in preskusne metodeBordsteine aus Naturstein für Außenbereiche - Anforderungen und PrüfverfahrenBordures de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essaiKerbs of natural stone for external paving - Requirements and test methods93.080.20Materiali za gradnjo cestRoad construction materials91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1343:2012SIST EN 1343:2013en,fr,de01-marec-2013SIST EN 1343:2013SLOVENSKI
STANDARDSIST EN 1343:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1343
November 2012 ICS 93.080.20 Supersedes EN 1343:2001English Version
Kerbs of natural stone for external paving - Requirements and test methods
Bordures de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essai
Bordsteine aus Naturstein für Außenbereiche - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 6 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1343:2012: ESIST EN 1343:2013
Calculation of height for kerbs for kerbs with a square cross section . 19Annex B (informative)
Guidance on sampling . 20B.1 General . 20B.2 Principles of sampling . 20B.3 Taking bulk samples . 20B.4 Preparing a sampling plan . 20B.5 Sampling apparatus . 21B.6 Sampling methods . 21B.6.1 General . 21B.6.2 Sampling from quarries . 21B.6.3 Sampling from production units and consignments . 22B.6.4 Sampling from construction works . 22B.7 Marking, packaging and dispatch of the samples . 22B.8 Sampling report . 22Annex C (informative)
Example of calculation of Lower Expected Value . 24C.1 Scope . 24SIST EN 1343:2013
Clauses of this European Standard addressing the provisions of the EU Construction Products Directives . 27ZA.1 Scope and relevant characteristics . 27ZA.2 Procedure for the attestation of conformity of kerbs of natural stone . 28ZA.2.1 System of attestation of conformity . 28ZA.2.2 EC declaration of conformity . 29ZA.3 CE marking and labelling . 29Bibliography . 31 SIST EN 1343:2013
b) The values to be declared have been clarified and where applicable the declared values are now ‘lower expected values’. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
EN 13373:2003, Natural stone test methods — Determination of geometric characteristics on units EN 13755, Natural stone test methods — Determination of water absorption at atmospheric pressure
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 kerb unit greater than 300 mm in length, commonly used as edging to a road or footpath
Note 1 to entry: See Figure 1. 3.1.1 curved concave kerb kerb, curved in plan with a concave face 3.1.2 curved convex kerb kerb, curved in plan with a convex face SIST EN 1343:2013
upper face horizontal surface of a kerb intended to be seen when in use 3.3
bed face surface of a kerb intended to be in contact with the bedding material when in use 3.4
front face
vertical traffic face of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.