prEN 17860-3
(Main)Carrier Cycles - Part 3: Lightweight multi track carrier cycles - Mechanical aspects
Carrier Cycles - Part 3: Lightweight multi track carrier cycles - Mechanical aspects
This standard specifies mechanical aspects of lightweight multi track carrier cycles.
Lastenfahrräder - Teil 3: Leichte mehrspurige Lastenfahrräder - Mechanische Aspekte
Cycles utilitaires - Partie 3 : Cycles utilitaires légers à 3 roues et plus - Aspects mécaniques
Tovorna kolesa - 3. Del: Lahka večsledna tovorna kolesa - Mehanski vidiki
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17860-3:2022
01-september-2022
Tovorna kolesa - 3. Del: Lahka večsledna tovorna kolesa - Mehanski vidiki
Carrier Cycles - Part 3: Lightweight multi track carrier cycles - Mechanical aspects
Lastenfahrräder - Teil 3: Leichte mehrspurige Lastenfahrräder - Mechanische Aspekte
Cycles utilitaires - Partie 3 : Cycles utilitaires légers à 3 roues et plus - Aspects
mécaniques
Ta slovenski standard je istoveten z: prEN 17860-3
ICS:
43.150 Kolesa Cycles
oSIST prEN 17860-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17860-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN 17860-3:2022
DRAFT
EUROPEAN STANDARD
prEN 17860-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2022
ICS 43.150
English Version
Carrier Cycles - Part 3: Lightweight multi track carrier
cycles - Mechanical aspects
Cycles utilitaires - Partie 3 : Cycles utilitaires légers à 3 Lastenfahrräder - Teil 3: Leichte mehrspurige
roues et plus - Aspects mécaniques Lastenfahrräder - Mechanische Aspekte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 333.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17860-3:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17860-3:2022
prEN 17860-3:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Use cases: private and commercial/professional use . 7
5 Design of the surface . 7
6 Securing and strength of safety-relevant fasteners . 7
7 Position of the payload . 7
8 Pedal clearance . 7
9 Brakes . 8
10 Parking and stability .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.