Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

This standard specifies the requirements relating to:
Steel FE-PA3901 (X2CrNi18-9)
Air melted
Softened
Plate, sheet and strip
0,4 mm < a<20 mm
520 MPa for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PA3901 (X2CrNi18-9) - Lufterschmolzen - Weichgeglüht - Platten, Bänder und Bleche - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

Diese Norm legt die Anforderungen an
Stahl FE-PA3901 (X2CrNi18-9)
Lufterschmolzen
Weichgeglüht
Platten, Bänder und Bleche
0,4 mm < or = a < or = 20 mm
520 MPa < or = Rm < or = 670 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PA3901 (X2CrNi18-9) - Élaboré à l'air - Adouci - Plaques, tôles et bandes - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

Aeronavtika - Jeklo FE-PA3901 (X2CrNi18-9) - Taljeno na zraku - Mehčano - Plošče, pločevina in trakovi - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPa

General Information

Status
Published
Publication Date
21-Aug-2007
Withdrawal Date
28-Feb-2008
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Aug-2007
Completion Date
22-Aug-2007

Relations

Buy Standard

Standard
EN 2467:2007
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPaSérie aérospatiale - Acier FE-PA3901 (X2CrNi18-9) - Élaboré a l'air - Adouci - Plaques, tôles et bandes - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPaLuft- und Raumfahrt - Stahl FE-PA3901 (X2CrNi18-9) - Lufterschmolzen - Weichgeglüht - Platten, Bänder und Bleche - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPaTa slovenski standard je istoveten z:EN 2467:2007SIST EN 2467:2007en49.025.10JeklaSteelsICS:SLOVENSKI
STANDARDSIST EN 2467:200701-november-2007







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2467
August 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted -Softened - Plate, sheet and strip - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Série aérospatiale - Acier FE-PA3901 (X2CrNi18-9) - Élaboré à l'air - Adouci - Plaques, tôles et bandes -0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Luft- und Raumfahrt - Stahl FE-PA3901 (X2CrNi18-9) - Lufterschmolzen - Weichgeglüht - Platten, Bänder und Bleche - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPaThis European Standard was approved by CEN on 23 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2467:2007: E



EN 2467:2007 (E) 2 Foreword This document (EN 2467:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.