EN 13357:2002

Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens

This European Standard specifies a method for the determination of the efflux time (pseudoviscosity) of petroleum cut-back bitumen in arbitrary units using an efflux viscometer.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausflusszeit von Mineralölverschnittbitumen und -fluxbitumen

Diese Europäische Norm legt ein Verfahren für die Bestimmung der Ausflußzeit (Pseudoviskosität) von Mineralölverschnittbitumen in Sekunden unter Anwendung eines Ausflußviskosimeters fest.

Bitumes et liants bitumineux - Détermination du temps d'écoulement des bitumes fluidifiés et fluxés

La présente norme européenne prescrit une méthode de détermination du temps d'écoulement (pseudo viscosité) des bitumes fluxés en unités conventionnelles en utilisant un viscosimètre à écoulement.

Bitumen in bitumenska veziva – Določanje viskoznosti s petrolejem rezanega in fluksiranega bitumna, metoda z iztočnim viskozimetrom

General Information

• Status: Withdrawn
• Publication Date: 10-Dec-2002
• Withdrawal Date: 08-Mar-2011
• ICS: 75.140 - Waxes, bituminous materials and other petroleum products
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 336 - Bituminous binders
• Drafting Committee: CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 09-Mar-2011
• Completion Date: 09-Mar-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13357:2003 - Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens

Relations

• Replaced By: EN 12846-2:2011 - Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2003
%LWXPHQLQELWXPHQVNDYH]LYD±'RORþDQMHYLVNR]QRVWLVSHWUROHMHPUH]DQHJDLQ
IOXNVLUDQHJDELWXPQDPHWRGD]L]WRþQLPYLVNR]LPHWURP
Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back
and fluxed bitumens
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausflusszeit von
Mineralölverschnittbitumen und -fluxbitumen
Bitumes et liants bitumineux - Détermination du temps d'écoulement des bitumes
fluidifiés et fluxés
Ta slovenski standard je istoveten z: EN 13357:2002
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13357
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 75.140; 91.100.50
English version
Bitumen and bituminous binders - Determination of the efflux
time of petroleum cut-back and fluxed bitumens
Bitumes et liants bitumineux - Détermination du temps Bitumen und bitumenhaltige Bindemittel - Bestimmung der
d'écoulement des bitumes fluidifiés et fluxés Ausflusszeit von Mineralölverschnittbitumen und -
fluxbitumen
This European Standard was approved by CEN on 23 October 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13357:2002 E
worldwide for CEN national Members.

Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Apparatus .4
6 Procedure .5
6.1 Preparation of sample .5
6.2 Preparation of apparatus .6
6.3 Procedure .6
7 Expression of results .6
8 Precision.6
8.1 Repeatability.6
8.2 Reproducibility.6
9 Test report .7
Annex A (normative) Specifications of thermometer .12
Foreword
This document (EN 13357:2002) has been prepared by Technical Committee CEN/TC 336, "Bituminous binders",
the Secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest by
June 2003.
This European Standard is based on IP 72-86.
Annex A is normative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
1 Scope
This European Standard specifies a method for the determination of the efflux time of petroleum cut-back and
fluxed bitumens in seconds using an efflux viscometer.
WARNING – The use of this European Standard may involve hazardous materials, operations and
equipment. This European Standard does not purport to address all of the safety problems associated with
its use. It is the responsibility of the user of this European Standard to establish appropriate safety and
health practices and determine the applicability of regulatory limitations prior to use.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
1)
EN 58 , Sampling bituminous binders.
EN 12594, Bitumen and bituminous binders – Preparation of test samples.
ISO 9722, Nickel and nickel alloys – Composition and forms of wrought products.
3 Terms and definitions
For the purposes of this European Standard, the following terms and definitions apply.
3.1
viscosity
internal resistance of a fluid to flow
3.2
efflux time
time needed for a specified volume of a material to flow through a specified orifice at a specified temperature
NOTE The efflux time is an indication of the pseudoviscosity, which is defined as the internal resistance to flow of fluids.
4 Principle
The viscosity of petroleum cut-back and fluxed bitumens is determined using an efflux viscometer known as the
Standard Tar Viscometer (STV) which determines the time of efflux of 50 ml of the sample through a 4 mm or a
10 mm orifice.
5 Apparatus
Usual laboratory apparatus and glassware, together with the following:
5.1 Viscometer, (see the example of viscometer in Figure 1) consisting essentially of a cup with an orifice in the
centre of the base
...