EN 326-2:2010/FprA1

Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control

This European Standard specifies methods for internal initial type testing (ITT) and internal factory production control (FPC) as well as external control of wood-based panels for their compliance with EN 13986 and other relevant product specifications. However, it may also apply, at the option of the manufacturer, to wood-based panels applied for non-construction purposes.

Holzwerkstoffe - Probenahme, Zuschnitt und Überwachung - Teil 2: Erstprüfung des Produktes und werkseigene Produktionskontrolle

Panneaux à base de bois - Echantillonnage, découpe et contrôle - Partie 2: Essai de type initial et contrôle de la production en usine

Lesne plošče - Vzorčenje, razžagovanje in kontrola - 2. del: Začetno preskušanje tipa in kontrola proizvodnje v obratu - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 79.060.01 - Wood-based panels in general
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 4 - Test methods
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 16-Jun-2014
• Due Date: 27-Dec-2014
• Completion Date: 16-Jun-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
• Ref Project: SIST EN 326-2:2011/FprA1:2014 - Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control

Relations

• Merged Into: EN 326-2:2010+A1:2014 - Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
• Effective Date: 18-Jan-2023
• Amends: EN 326-2:2010 - Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
• Effective Date: 19-Jun-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2014
/HVQHSORãþH9]RUþHQMHUD]åDJRYDQMHLQNRQWURODGHO=DþHWQRSUHVNXãDQMH
WLSDLQNRQWURODSURL]YRGQMHYREUDWX'RSROQLOR$
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and
factory production control
Holzwerkstoffe - Probenahme, Zuschnitt und Überwachung - Teil 2: Erstprüfung des
Produktes und werkseigene Produktionskontrolle
Panneaux à base de bois - Echantillonnage, découpe et contrôle - Partie 2: Essai de
type initial et contrôle de la production en usine
Ta slovenski standard je istoveten z: EN 326-2:2010/FprA1
ICS:
79.060.01 /HVQHSORãþHQDVSORãQR Wood-based panels in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 326-2:2010
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
January 2014
ICS 79.060.01
English Version
Wood-based panels - Sampling, cutting and inspection - Part 2:
Initial type testing and factory production control
Panneaux à base de bois - Echantillonnage, découpe et Holzwerkstoffe - Probenahme, Zuschnitt und Überwachung
contrôle - Partie 2: Essai de type initial et contrôle de la - Teil 2: Erstprüfung des Produktes und werkseigene
production en usine Produktionskontrolle
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 112.
This draft amendment A1, if approved, will modify the European Standard EN 326-2:2010. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies o
...