EN 326-2:2010
(Main)Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
This European Standard specifies methods for internal initial type testing (ITT) and internal factory production control (FPC) as well as external control of wood-based panels for their compliance with EN 13986 and other relevant product specifications. However, it may also apply, at the option of the manufacturer, to wood-based panels applied for non-construction purposes.
This European Standard is not applicable for the assessment of compliance with specifications of panels comprised in consignments. In such cases, EN 326-3 applies.
For factory production control, if required, methods for the assessment of conformity of batches and of production over longer periods are given.
For external control, if required, methods for the initial inspection of a factory and initial type testing of a product, and for the surveillance of the factory production control, are given.
In the factory production control small test pieces are used. The statistics of evaluation is based on normal distribution.
Holzwerkstoffe - Probenahme, Zuschnitt und Überwachung - Teil 2: Erstprüfung des Produktes und werkseigene Produktionskontrolle
Diese Europäische Norm legt Verfahren für die Erstprüfung des Produktes und die werkseigene Produk-tionskontrolle sowie für die Fremdüberwachung der Übereinstimmung von Holzwerkstoffen mit EN 13986 und anderen relevanten Produktnormen fest. Sie ist jedoch auch anwendbar für Holzwerkstoffe, die nicht zur Verwendung im Bauwesen vorgesehen sind, wenn der Hersteller dies vorsieht.
Diese Europäische Norm gilt nicht für die Bewertung der Übereinstimmung mit den Anforderungen bei Platten¬lieferungen. In solchen Fällen gilt EN 326-3.
Für die werkseigene Produktionskontrolle, falls erforderlich, werden Verfahren zur Bewertung der Über-einstimmung bei Chargen und bei der Fertigung über längere Zeiten angegeben.
Für die Fremdüberwachung, falls erforderlich, werden Verfahren zur Erstinspektion eines Werkes und einer Erstprü¬fung des Produktes sowie zur Überwachung der werkseigenen Produktionskontrolle angegeben.
Für die werkseigene Produktionskontrolle werden kleine Prüfköper verwendet. Die statistischen Nachweis-verfahren basieren auf einer Normalverteilung.
Panneaux à base de bois - Echantillonnage, découpe et contrôle - Partie 2 : Essai de type initial et contrôle de la production en usine
La présente Norme Européenne prescrit les méthodes pour les essais internes de type initial (ITT) et pour le contrôle de production interne en usine (CPU) ainsi que le contrôle externe des panneaux à base de bois vis-à-vis des exigences de la norme EN 13986 et des normes d’exigences produits pertinentes concernées. Cependant, la présente norme peut aussi s’appliquer, selon le choix du fabricant, aux panneaux à base de bois qui ne sont pas destinés à la construction.
La présente Norme Européenne ne s’applique pas à l’évaluation de la conformité au regard des spécifications des caractéristiques des panneaux faisant partie de livraisons. Dans ce cas, l’EN 326-3 s’applique.
Pour le contrôle interne de la production en usine, si nécessaire, les méthodes d’évaluation de la conformité des lots et de la production sur de longues périodes sont indiquées.
Pour le contrôle externe, si nécessaire, les méthodes de l’inspection initiale de l’usine et d’essai de type initial d’un produit, ainsi que les méthodes relatives à la surveillance du contrôle de la production en usine sont indiquées.
Pour le contrôle de production en usine, on utilise des petites éprouvettes. Les statistiques d’évaluation sont basées sur une distribution normale.
Lesne plošče - Vzorčenje, razžagovanje in kontrola - 2. del: Začetno preskušanje tipa in kontrola proizvodnje v obratu
Ta evropski standard določa metode za začetno preskušanje tipa (ITT) in kontrolo proizvodnje v tovarni (FCP) ter za kontrolo lesnih plošč zunaj tovarne zaradi skladnosti z EN 13986 in drugimi ustreznimi specifikacijami proizvoda. Vendar lahko, če tako izbere proizvajalec, velja tudi za lesne plošče, ki se uporabljajo za nekonstrukcijske namene. Ta evropski standard ne velja za ocenjevanje skladnosti s specifikacijami za plošče v pošiljkah. V takih primerih velja EN 326-3. Za kontrolo proizvodnje v tovarni, če je potrebna, so podane metode za ocenjevanje skladnosti serij in za dolgoročno proizvodnjo. Za kontrolo zunaj tovarne, če je potrebna, so podane metode za začetno preverjanje in začetno preskušanje tipa proizvoda in za nadzor kontrole proizvodnje v tovarni. Pri kontroli proizvodnje v tovarni se uporabljajo majhni preskušanci. Statistika ocenjevanja sloni na normalni distribuciji.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzwerkstoffe - Probenahme, Zuschnitt und Überwachung - Teil 2: Erstprüfung des Produktes und werkseigene ProduktionskontrollePanneaux à base de bois - Echantillonnage, découpe et contrôle - Partie 2: Essai de type initial et contrôle de la production en usineWood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control79.060.01Wood-based panels in generalICS:Ta slovenski standard je istoveten z:EN 326-2:2010SIST EN 326-2:2011en,fr,de01-marec-2011SIST EN 326-2:2011SLOVENSKI
STANDARDSIST EN 326-2:2004/AC:2006SIST EN 326-2:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 326-2
September 2010 ICS 79.060.01 Supersedes EN 326-2:2000English Version
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
Panneaux à base de bois - Echantillonnage, découpe et contrôle - Partie 2 : Essai de type initial et contrôle de la production en usine
Holzwerkstoffe -Probenahme, Zuschnitt und Überwachung - Teil 2: Erstprüfung des Produktes und werkseigene Produktionskontrolle This European Standard was approved by CEN on 7 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 326-2:2010: ESIST EN 326-2:2011
Example of initial type testing by variables – Evaluation of bending strength of particleboards (see 5.2) . 21A.1 Example . 21A.2 Sampling (see 5.1.2) . 21A.3 Test results, records and evaluation (see 5.2.3 and EN 326-1:1994, Clause 7) . 21Annex B (informative)
Factory production control by variables – Example: Batch production (see 6.4.2) . 23B.1 General . 23B.2 Sampling . 23B.3 Testing . 23B.4 Calculation and recording of test results of the first sample . 23B.4.1 Example for the case that the first sample of one panel fulfils the panel characteristic requirement . 23B.4.2 Example for the case that the first sample of one panel does not fulfil the panel characteristic requirement . 24SIST EN 326-2:2011
Example of initial type testing attributes - Evaluation of bonding quality of plywood (see 6.4.3.1) . 27C.1 Example . 27C.2 Sampling plan . 27C.3 Sampling (see 5.3.1) . 27C.4 Test data and evaluation of bond shear strength and apparent cohesive wood fibre failure percentage . 27C.4.1 General . 27C.4.2 First sample . 28C.4.3 Second sample . 29C.5 Single sampling plan . 30Annex D (informative)
Control of factory production control records - Examples of the determination of differences between factory testing and external testing (see 6.6) . 31D.1 General . 31D.1.1 Use of unconditioned test pieces . 31D.1.2 Paired testing . 31D.2 Example (1): Swelling in thickness tested according to EN 317 . 32D.2.1 Sample of example (1) . 32D.2.2 Control of variability . 32D.3 Example (2): Internal bond tested according to EN 319 . 34D.3.1 General . 34D.3.2 Sample of example (2) . 34D.3.3 Control of variability . 34D.4 Determination of a significant difference between the results from the alternative test procedure and from the standard reference test method . 35Annex E (informative)
Example of the calculation of a linear correlation (see 7.2) . 37Annex F (informative)
Example of the determination of a significant difference between the results from the alternative test procedure and from the standard reference test method (see 6.4.5) in accordance with EN 13986 . 40F.1 General . 40F.2 Control of variability (see Annex D) . 41F.3 Determination of a significant difference (see Annex D) . 41Bibliography . 42 SIST EN 326-2:2011
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.