Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984)

This part specifies a method for the determination of the tensile strength, in the longitudinal direction, of conveyor belts with a steel carcase. Some figures illustrate shapes and reference quantities of concern. Applies exclusively to conveyor belts with a steel carcase.

Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 2: Messung der Zugfestigkeit (ISO 7622-2:1984)

Dieser Teil von ISO 7622 beschreibt ein Verfahren, um die Zugfestigkeit eines Stahlseilfördergurtes in Längsrichtung zu bestimmen. Es wird ausschließlich bei Stahlseilfördergurten angewendet.

Courroies transporteuses à câbles d'acier - Essai de traction dans le sens longitudinal - Partie 2: Mesurage de la résistance à la rupture (ISO 7622-2:1984)

La présente partie de l'ISO 7622 spécifie une méthode de détermination des caractéristiques de résistance à la rupture dans le sens longitudinal d'une courroie transporteuse à câbles d'acier. Elle s'applique exclusivement aux courroies transporteuses à câbles d'acier.

Trakovi tračnih transporterjev z vložkom iz jeklenih vrvi - Vzdolžni natezni preskus - 2. del: Merjenje natezne trdnosti (ISO 7622-2:1984)

General Information

Status
Withdrawn
Publication Date
17-Oct-1995
Withdrawal Date
17-Nov-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Nov-2015

Relations

Buy Standard

Standard
EN ISO 7622-2:1997
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7622-2:1997
01-marec-1997
7UDNRYLWUDþQLKWUDQVSRUWHUMHY]YORåNRPL]MHNOHQLKYUYL9]GROåQLQDWH]QLSUHVNXV
GHO0HUMHQMHQDWH]QHWUGQRVWL ,62
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile
strength (ISO 7622-2:1984)
Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 2: Messung der Zugfestigkeit
(ISO 7622-2:1984)
Courroies transporteuses a câbles d'acier - Essai de traction dans le sens longitudinal -
Partie 2: Mesurage de la résistance a la rupture (ISO 7622-2:1984)
Ta slovenski standard je istoveten z: EN ISO 7622-2:1995
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 7622-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7622-2:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 7622-2:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 7622-2:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 7622-2:1997
762212
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*MEIK~YHAPO~~HAR OPfAHl43AUMR IlO CTAH~APTbl3AL(MWORGANlSATlON INTERNATIONALE DE NORMALISATiON
Steel cord conveyor belts - Longitudinal traction test -
Part 2: Measurement of tensile strength
Courroies transporteuses & c&/es d’acier - Essai de traction dans le sens longitudinal - Partie 2: Mesurage de la rksistance ;i la
rupture
First edition - 1984-12-15
UDC 621.867.21 : 620372.24 Ref. No. IS0 7622/2-1984 (E)
Descriptors : conveyor belts, tests, tension tests, determination, tensile strength.
Price based on 3 pages

---------------------- Page: 5 ----------------------

SIST EN ISO 7622-2:1997
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
I body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 7622/2 was prepared by Technical Committee ISO/TC 41,
Pulleys and belts (including veebeltsl.
0 International Organization for Standardization, 1984
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 7622-2:1997
IS0 7622/2-1984
INTERNATIONAL STANDARD
Steel cord conveyor belts - Longitudinal traction test -
Part 2: Measurement of tensile strength
0 Introduction 4 Apparatus
The test method described in this part of IS0 7622 is intended
4.1 Dynamometric tensile testing machine, complying
to verify, by destructive testing, the tensile strength of steel
with the following requirements :
cords constituting the carcass of conveyor belts. As it is a
a) the force exerted by the machine shall be adaptable to
destructive test, it should be used only in the event of litigation
the strength of the test specimen. The testing machine
or where no certificate of compliance is issued by the cord
capacity shall be such that the maximum testing load is 15
manufacturer.
to 85 % of the capacity of the machine;
b) the rate of separation of the jaws shall be capable of
being set at 100 + 10 mm/min and shall be capable of be-
1 Scope and field of application
ing maintained constant;
c) the separation between the jaws shall be capable of
This part of IS0 7622 specifies a method for the determination
being set at at least 250 mm;
of the tensile strength, in the longitudinal direction, of con-
veyor belts with a steel carcass.
d) the form of the jaws shall be such that the test
specimen is held perfectly and all possibility of slipping dur-
It applies exclusively to conveyor belts with a steel carcass.
ing the test is eliminated. For this purpose, cross-ribbed
jaws (see figure I), with the length of the ribbed part at least
80 mm, are recommended.
2 Reference
5 Test specimens
IS0 471, Rubber - Standard temperatures, humidities and
times for the conditioning and testing of test pieces.
5.1 General
Cut three test specimens of the following dimensions:
- length (in the longitudinal direction of the belt):
3 Principle
450 mm min. depending on the strength of the cords;
-
Traction test to breaking of a test specimen prepared in such a width: such that the test specimen contains five warp
way that on
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.