EN ISO 15236-1:2005

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005)

ISO 15236-1:2005 specifies the performance and constructional requirements applicable to conveyor belts having steel cords in the longitudinal direction as reinforcement. The requirements for construction given in Clause 6 apply to the design of single belts as well as the design of complete type series such as those covered in ISO 15236-2.

Stahlseilfördergurte - Teil 1: Aufbau, Maße und mechanische Anforderungen an Fördergurte für allgemeine Einsatzbedingungen (ISO 15236-1:2005)

Dieser Teil von EN ISO 15236 legt die Anforderungen an Funktion und Aufbau für Fördergurte fest, die in Längsrichtung mit Stahlseilen verstärkt werden. Die Konstruktionshinweise in Abschnitt 6 gelten sowohl für den Bau einzelner Gurte als auch für Typenreihen. Diese Reihen werden in EN ISO 16236- 2 beschrieben.

Courroies transporteuses à câbles d'acier - Partie 1: Exigences de conception, de dimensions et mécaniques des courroies transporteuses à usage général (ISO 15236-1:2005)

L'ISO 15236-1:2005 spécifie les exigences de performance et de construction applicables aux courroies transporteuses à câbles d'acier placées dans le sens longitudinal en tant qu'armature. Les exigences de construction s'appliquent à la conception des courroies simples ainsi qu'à la conception des séries de types de courroies traités dans l'ISO 15236-2.

Naprave za kontinuirni transport – Trakovi tračnih transporterjev z jeklenimi vrvmi – 1. del: Zgradba traku, mere in mehanske zahteve trakov za splošne namene (ISO 15236-1:2005)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2005
• Withdrawal Date: 15-Nov-2016
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 4 - Technical specifications for steel cord conveyor belting
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Nov-2016
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 15236-1:2006 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005)

Relations

• Replaced By: EN ISO 15236-1:2016 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15236-1:2006
01-marec-2006
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW±7UDNRYLWUDþQLKWUDQVSRUWHUMHY]MHNOHQLPLYUYPL
±GHO=JUDGEDWUDNXPHUHLQPHKDQVNH]DKWHYHWUDNRY]DVSORãQHQDPHQH,62

Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for
conveyor belts for general use (ISO 15236-1:2005)
Stahlseilfördergurte - Teil 1: Aufbau, Maße und mechanische Anforderungen an
Fördergurte für allgemeine Einsatzbedingungen (ISO 15236-1:2005)
Courroies transporteuses a câbles d'acier - Partie 1: Exigences de conception, de
dimensions et mécaniques des courroies transporteuses a usage général (ISO 15236-
1:2005)
Ta slovenski standard je istoveten z: EN ISO 15236-1:2005
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 15236-1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15236-1:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 15236-1:2006
EUROPEAN STANDARD
EN ISO 15236-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 53.040.20

English Version
Steel cord conveyor belts - Part 1: Design, dimensions and
mechanical requirements for conveyor belts for general use (ISO
15236-1:2005)
Courroies transporteuses à câbles d'acier - Partie 1: Stahlseilfördergurte - Teil 1: Aufbau, Maße und
Exigences de conception, de dimensions et mécaniques mechanische Anforderungen an Fördergurte für allgemeine
des courroies transporteuses à usage général (ISO 15236- Einsatzbedingungen (ISO 15236-1:2005)
1:2005)
This European Standard was approved by CEN on 19 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15236-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15236-1:2006
EN ISO 15236-1:2005 (E)




Foreword



This document (EN ISO 15236-1:2005) has been prepared by Technical Committee CEN/TC 188 "Conveyor
belts", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 41 "Pulleys
and belts (including veebelts)".

This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at
the latest by April 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15236-1:2006


INTERNATIONAL ISO
STANDARD 15236-1
First edition
2005-10-01

Steel cord conveyor belts —
Part 1:
Design, dimensions and mechanical
requirements for conveyor belts for
general use
Courroies transporteuses à câbles d'acier —
Partie 1: Exigences de conception, de dimensions et mécaniques des
courroies transporteuses à usage général




Reference number
ISO 15236-1:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 15236-1:2006
ISO 15236-1:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties ac
...