iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 12315-2:1996

(Main)

Traffic and Traveller Information (TTI) - TTI Messages via Dedicated Short-Range Communication - Part 2: Data Specification - Uplink (Vehicle to Roadside)

Traffic and Traveller Information (TTI) - TTI Messages via Dedicated Short-Range Communication - Part 2: Data Specification - Uplink (Vehicle to Roadside)

A Centrally Determined Route Guidance (CDRG) system using Dedicated Short Range Communication (DSRC) is based on infrastructure and equipped vehicles. The Route Guidance Information (RGI) is generated by a Central Office (CO) and distributed via DSRC to the equipped vehicles. To enable dynamic RGI the Central Office needs real time traffic flow data. This data is provided through the system itself using vehicles as probes.

Prometne in potovalne informacije (TTI) – Sporočila TTI prek posebne komunikacije kratkega dosega – 2. del: Podatkovna specifikacija – Navzgornja povezava (od vozila do cestnega roba)

General Information

Status
Withdrawn
Publication Date
20-Aug-1996
Withdrawal Date
28-Oct-2014
ICS
35.240.60 - IT applications in transport
Technical Committee
CEN/TC 278 - Road transport and traffic telematics
Drafting Committee
CEN/TC 278/WG 4 - Traffic and traveller information (TTI)
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Oct-2014
Mandate
M/018 - Standardization Mandate forwarded to CEN/CENELEC/ETSI in the field of Information Technology and Telecommunications concerning Road Transport and Traffic Telematics
Ref Project
SIST ENV 12315-2:2003 - Traffic and Traveller Information (TTI) - TTI Messages via Dedicated Short-Range Communication - Part 2: Data Specification - Uplink (Vehicle to Roadside)

Relations

Child
ENV 12315-1:1996 - Traffic and Traveller Information (TTI) - TTI Messages via Dedicated Short-Range Communication - Part 1: Data Specification - Downlink (Roadside to Vehicle)
Effective Date
22-Dec-2008

Buy Standard

ENV 12315-2:2003ENV 12315-2:2003
PreviousNext
Standardization document
ENV 12315-2:2003
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2003
3URPHWQHLQSRWRYDOQHLQIRUPDFLMH 77, ±6SRURþLOD77,SUHNSRVHEQH
NRPXQLNDFLMHNUDWNHJDGRVHJD±GHO3RGDWNRYQDVSHFLILNDFLMD±1DY]JRUQMD
SRYH]DYD RGYR]LODGRFHVWQHJDURED
Traffic and Traveller Information (TTI) - TTI Messages via Dedicated Short-Range
Communication - Part 2: Data Specification - Uplink (Vehicle to Roadside)
Ta slovenski standard je istoveten z: ENV 12315-2:1996
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

-------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 18078:2024(Main)
Electronic fee collection - Measurement of interferences on tolling and tachograph devices from radio local area network devices operating in the 5,8 GHz frequency range - Test suite structure and test purposes
kSIST-TS FprCEN/TS 18078:2024

This document specifies the set-up of a testing system and the test suite structure and test purposes, i.e. tests to be used to assess the level of interference from RLAN devices operating in the 5,8 GHz range on tolling and tachograph devices operating in the same frequency range.
To obtain generalized results that can subsequently be used to design appropriate mitigation techniques, the test environment and the test cases are designed to:
1.   acquire a large number of transactions on devices of different makes and characteristics;
2.   ensure anonymity of results.
The test results ensure calculation of averages as well as standard deviations.
The tests specified in this document are for the sole purpose of investigating RLAN interference over DSRC communications. Other factors that can impact the performance of DSRC and also the level of interference in a test scenario are not subject to test specifications and out of the scope of this document.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16986:2024(Main)
Electronic fee collection - Interoperable application profiles for information exchange between service provision and toll charging
SIST EN 16986:2024

This document defines an application interface definition by selecting suitable options from the base standard EN ISO 12855:2021. Furthermore, it defines transfer mechanisms and supporting functions to ensure the interoperability between Toll Chargers and Toll Service Providers.
This document covers:
—   exchange of information between the central equipment associated with the two roles service provision and toll charging, e.g.:
o   charging related data (exception lists, toll declarations, billing details, payment claims);
o   administrative data (trust objects, EFC context data, contact details for enforcement, etc.);
o   confirmation data.
—   transfer mechanisms and supporting functions;
—   semantics of data elements;
—   restrictions on parameters and their values
—   implementation conformance statement proforma, in an Annex, as a basis for assessment of conformity to this document;
—   an Interoperability statement proforma, in an Annex, as a basis for assessment of transactional interoperability of two technical implementations;
—   a web service definition, in an Annex, for the use of web services as communication technology.
The implementation of the underlying back office systems and their business processes is not covered.

  • Standard
    225 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 19321:2024(Main)
Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structures (ISO/TS 19321:2024)
SIST-TS CEN ISO/TS 19321:2024

This document specifies the in-vehicle information (IVI) data structures that are required by different intelligent transport system (ITS) services for exchanging information between ITS stations (ITS-S). A general, extensible data structure is specified, which is split into structures called containers to accommodate current-day information. Transmitted information includes IVI such as contextual speed, road works warnings, vehicle restrictions, lane restrictions, road hazard warnings, location-based services and re-routing. The information in the containers is organized in sub-structures called data frames and data elements, which are described in terms of their content and syntax.
The data structures are specified as communications-agnostic. This document does not provide the communication protocols. This document provides scenarios for usage of the data structure, e.g. in case of real time, short-range communications.

  • Technical specification
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16614-6:2024(Main)
Public transport - Network and timetable exchange (NeTEx) - Part 6: European Passenger Information Accessibility Profile
SIST-TS CEN/TS 16614-6:2024

This document is a profile of the CEN/TS 16614 series. It focuses on information relevant to feed the necessary accessibility passenger information services and excludes operational and fares information. It is based directly on EPIP (CEN/TS 16614-4).
This European Passenger Information Accessibility Profile (EPIAP) for NeTEx is for exchanging passenger information; it describes how to extend EPIP (the European Passenger Information Profile) with additional information (including a minimal set) to feed the necessary accessibility passenger information services in a European wide and multimodal context. EPIAP especially formulates a mandatory minimal implementation that needs to be filled in by everybody to deliver the necessary information for an assessment of the accessibility of site(s), vehicles and on vehicle-site interaction for impaired persons. The minimal level allows an assessment and contains the information to produce PRM TSI if necessary. It will also cover what the current legislation usually warrants. It then describes how additional information must be provided if an organisation decides to provide it (e.g. the information of the full DELFI+ standard in Germany).
EPIP does not reflect part 5 (New Modes) yet. However, EPIAP takes it into account. EPIP will have to be adapted accordingly.
For EPIAP to be of use, the EC needs to declare the minimal level of EPIAP as mandatory.

  • Technical specification
    209 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15531-6:2024(Main)
Public transport - Service interface for real-time information relating to public transport operations - Part 6: Functional service interfaces: Control Actions
SIST-TS CEN/TS 15531-6:2024

This document specifies an additional SIRI functional service to exchange information about Control Actions, between monitoring systems and servers containing real-time public transport vehicle or journey time data. These include the control centres of transport operators, as well as information systems that deliver passenger travel information services. As for Transmodel, public transport modes include new modes of transport (vehicle sharing, vehicle pooling, etc.).
This document describes the SIRI Control Action service, one of a modular set of services for the exchange of Real-time information. The Control Action service (SIRI-CA) is concerned with the exchange of information about decision made concerning the real-time management of the operation of a transport system as performed by operators while operating the services.

  • Technical specification
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14823-1:2024(Main)
Intelligent transport systems - Graphic data dictionary - Part 1: Specification (ISO 14823-1:2024)
SIST EN ISO 14823-1:2024

This document specifies a graphic data dictionary (GDD), a system of standardized codes for existing road traffic signs and pictograms used to deliver traffic and traveller information (TTI). The coding system can be used in the formation of messages within intelligent transport systems (ITS).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21177:2024(Main)
Intelligent transport systems - ITS station security services for secure session establishment and authentication between trusted devices (ISO 21177:2024)
SIST EN ISO 21177:2024

This document contains specifications for a set of ITS station security services required to ensure the authenticity of the source and integrity of information exchanged between trusted entities, i.e.:
—     between devices operated as bounded secured managed entities, i.e. "ITS Station Communication Units" (ITS-SCU) and "ITS station units" (ITS-SU) as specified in ISO 21217; and
—     between ITS-SUs (composed of one or several ITS-SCUs) and external trusted entities such as sensor and control networks.
These services include the authentication and secure session establishment which are required to exchange information in a trusted and secure manner.
These services are essential for many intelligent transport system (ITS) applications and services, including time-critical safety applications, automated driving, remote management of ITS stations (ISO 24102-2), and roadside/infrastructure-related services.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13141:2024(Main)
Electronic fee collection - Localization augmentation communication for autonomous systems (ISO 13141:2024)
SIST EN ISO 13141:2024

This document establishes requirements for short-range communication for the purposes of augmenting the localization in autonomous electronic fee collection (EFC) systems. Localization augmentation serves to inform on-board equipment (OBE) about geographical location and the identification of a charge object. This document specifies the provision of location and heading information and security means to protect against the manipulation of the OBE with false RSE.
The localization augmentation communication (LAC) takes place between an OBE in a vehicle and fixed RSE. This document is applicable to OBE in an autonomous mode of operation.
This document specifies attributes and functions for the purpose of localization augmentation, by making use of the dedicated short-range communications (DSRC) communication services provided by DSRC Layer 7, and makes these LAC attributes and functions available to the LAC applications at the RSE and the OBE. Attributes and functions are specified on the level of application data units (ADUs; see Figure 1).
As depicted in Figure 1, this document is applicable to:
—     the application interface definition between OBE and RSE;
—     the interface to the DSRC application layer, as specified in ISO 15628 and EN 12834;
—     the use of the DSRC stack.
The LAC is suitable for a range of short-range communication media. This document provides specific definitions regarding the CEN-DSRC stack as specified in EN 15509. Annexes C, D, E and H provide for the use of the Italian DSRC as specified in ETSI/ES 200 674-1, ISO CALM IR ARIB DSRC and WAVE DSRC.
This document contains a protocol implementation conformance statement (PICS) proforma in Annex B and transaction examples in Annex F. Annex G highlights how to use this document for the European Electronic Toll Service (EETS).
Test specifications are not within the scope of this document.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12813:2024(Main)
Electronic fee collection - Compliance check communication for autonomous systems (ISO 12813:2024)
SIST EN ISO 12813:2024

This document specifies requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee collecting systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an interrogator [fixed and mobile roadside equipment (RSE) or hand-held unit] and serves to establish whether the data that are delivered by the OBE correctly reflect the road usage of the corresponding vehicle according to the rules of the pertinent toll regime.
The operator of the compliance checking interrogator is assumed to be part of the toll charging role as defined in ISO 17573-1. The CCC permits identification of the OBE, vehicle and contract, and verification of whether the driver has fulfilled their obligations and the checking status and performance of the OBE. The CCC reads, but does not write, OBE data.
This document is applicable to OBE in an autonomous mode of operation. It is not applicable to compliance checking in dedicated short-range communication (DSRC)-based charging systems.
It specifies data syntax and semantics, but not a communication sequence. All the attributes specified herein are required in any OBE claimed to be compliant with this document, even if some values are set to “not specified” in cases where a certain functionality is not present in an OBE. The interrogator is free to choose which attributes are read in the data retrieval phase, as well as the sequence in which they are read. In order to achieve compatibility with existing systems, the communication makes use of the attributes specified in ISO 17573-3 wherever useful.
The CCC is suitable for a range of short-range communication media. Specific definitions are given for the CEN-DSRC as specified in EN 15509, as well as for the use of ISO CALM IR, the Italian DSRC as specified in ETSI ES 200 674-1, ARIB DSRC, and WAVE DSRC as alternatives to the CEN-DSRC. The attributes and functions specified are for compliance checking by means of the DSRC communication services provided by DSRC application layer, with the CCC attributes and functions made available to the CCC applications at the RSE and OBE. The attributes and functions are specified on the level of application data units (ADUs).
The definition of the CCC includes:
—     the application interface between OBE and RSE (as depicted in Figure 2);
—     use of the generic DSRC application layer as specified in ISO 15628 and EN 12834;
—     CCC data type specifications given in Annex A;
—     a protocol implementation conformance statement (PICS) proforma is given in Annex B;
—     use of the CEN-DSRC stack as specified in EN 15509, or other equivalent DSRC stacks as described in Annex C, Annex D, Annex E and Annex F;
—     security services for mutual authentication of the communication partners and for signing of data (see Annex H);
In addition, an example CCC transaction is presented in Annex G and Annex I highlights how to use this document for the European Electronic Toll Service (EETS).
Test specifications are not within the scope of this document.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17419:2018/A1:2024(Amendment)
Intelligent transport systems - Cooperative systems - Globally unique identification - Amendment 1: Regions of a closed polygon in a plane (ISO 17419:2018/Amd 1:2024)
SIST EN ISO 17419:2018/A1:2024
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day