EN ISO 7590:2009

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009)

ISO 7590:2009 specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness.
Method B (optical method) is recommended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.

Stahlseil-Födergurte - Messung der Gesamtdicke und der Deckplattendicke (ISO 7590:2009)

Diese Internationale Norm legt drei Verfahren zur Messung der Gesamtdicke und der Deckplattendicke von Stahlseil Fördergurten fest.
Die Verfahren A1 und A2 (Verfahren mit Bügelmessschraube) können für alle Stahlseil Fördergurte sowohl zur Messung der Gesamtdicke der Gurte als auch der Deckplattendicke angewendet werden.
Verfahren B (optisches Verfahren) wird nur zur Messung der Deckplattendicke empfohlen. Es ist nicht geeig¬net, wenn ein textiler oder metallischer Schuss (Querlage) vorhanden ist oder wenn die Stahlseilenden beim Schneiden verdreht werden.

Courroies transporteuses à câbles d'acier - Méthodes de détermination de l'épaisseur totale et de l'épaisseur des revêtements (ISO 7590:2009)

L'ISO 7590:2009 spécifie trois méthodes de mesurage de l'épaisseur totale des courroies et de l'épaisseur des revêtements de courroies transporteuses à câbles d'acier.
Les méthodes A1 et A2 (méthode du micromètre) peuvent être utilisées pour toutes les courroies transporteuses à câbles d'acier, pour le mesurage de l'épaisseur totale des courroies et de l'épaisseur du revêtement.
La méthode B (méthode optique) est recommandée uniquement pour le mesurage de l'épaisseur du revêtement. Elle n'est pas appropriée pour les courroies à trame textile ou métallique, ni si les extrémités des câbles d'acier s'entortillent après découpage.

Naprave in sistemi za kontinuirni transport - Trakovi tračnih transporterjev z jeklenim vložkom - Določevanje celotne debeline in debeline zaščitne obloge (ISO 7590:2009)

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2009
• Withdrawal Date: 24-Jul-2018
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 4 - Technical specifications for steel cord conveyor belting
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-Jul-2018
• Ref Project: SIST EN ISO 7590:2009 - Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009)

Relations

• Replaces: EN ISO 7590:2001 - Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 7590:2018 - Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018)
• Effective Date: 30-Dec-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7590:2009
01-april-2009
1DGRPHãþD
SIST EN ISO 7590:2002
1DSUDYHLQVLVWHPL]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY]
MHNOHQLPYORåNRP'RORþHYDQMHFHORWQHGHEHOLQHLQGHEHOLQH]DãþLWQHREORJH,62

Steel cord conveyor belts - Methods for the determination of total thickness and cover
thickness (ISO 7590:2009)
Courroies transporteuses a câbles d'acier - Méthodes de détermination de l'épaisseur
totale de la courroie et de l'épaisseur des revetements (ISO 7590:2009)
Ta slovenski standard je istoveten z: EN ISO 7590:2009
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 7590:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7590:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 7590:2009
EUROPEAN STANDARD
EN ISO 7590
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2009
ICS 53.040.20 Supersedes EN ISO 7590:2001
English Version
Steel cord conveyor belts - Methods for the determination of
total thickness and cover thickness (ISO 7590:2009)
Courroies transporteuses à câbles d'acier - Méthodes de
détermination de l'épaisseur totale et de l'épaisseur des
revêtements (ISO 7590:2009)
This European Standard was approved by CEN on 3 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7590:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7590:2009
EN ISO 7590:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7590:2009
EN ISO 7590:2009 (E)
Foreword
This document (EN ISO 7590:2009) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2009, and conflicting national standards shall be withdrawn at the
latest by July 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7590:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7590:2009 has been approved by CEN as a EN ISO 7590:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 7590:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 7590:2009

INTERNATIONAL ISO
STANDARD 7590
Fifth edition
2009-01-15


Steel cord conveyor belts — Methods for
the determination of total thickness and
cover thickness
Courroies transporteuses à câbles d'acier — Méthodes de
détermination de l'épaisseur totale et de l'épaisseur des revêtements




Reference number
ISO 7590:2009(E)
©
ISO 2009

---------------------- Page: 7 -----------------
...