Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009)

ISO 7590:2009 specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness.
Method B (optical method) is recommended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.

Stahlseil-Födergurte - Messung der Gesamtdicke und der Deckplattendicke (ISO 7590:2009)

Diese Internationale Norm legt drei Verfahren zur Messung der Gesamtdicke und der Deckplattendicke von Stahlseil Fördergurten fest.
Die Verfahren A1 und A2 (Verfahren mit Bügelmessschraube) können für alle Stahlseil Fördergurte sowohl zur Messung der Gesamtdicke der Gurte als auch der Deckplattendicke angewendet werden.
Verfahren B (optisches Verfahren) wird nur zur Messung der Deckplattendicke empfohlen. Es ist nicht geeig¬net, wenn ein textiler oder metallischer Schuss (Querlage) vorhanden ist oder wenn die Stahlseilenden beim Schneiden verdreht werden.

Courroies transporteuses à câbles d'acier - Méthodes de détermination de l'épaisseur totale et de l'épaisseur des revêtements (ISO 7590:2009)

L'ISO 7590:2009 spécifie trois méthodes de mesurage de l'épaisseur totale des courroies et de l'épaisseur des revêtements de courroies transporteuses à câbles d'acier.
Les méthodes A1 et A2 (méthode du micromètre) peuvent être utilisées pour toutes les courroies transporteuses à câbles d'acier, pour le mesurage de l'épaisseur totale des courroies et de l'épaisseur du revêtement.
La méthode B (méthode optique) est recommandée uniquement pour le mesurage de l'épaisseur du revêtement. Elle n'est pas appropriée pour les courroies à trame textile ou métallique, ni si les extrémités des câbles d'acier s'entortillent après découpage.

Naprave in sistemi za kontinuirni transport - Trakovi tračnih transporterjev z jeklenim vložkom - Določevanje celotne debeline in debeline zaščitne obloge (ISO 7590:2009)

General Information

Status
Withdrawn
Publication Date
14-Jan-2009
Withdrawal Date
24-Jul-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
25-Jul-2018

Relations

Buy Standard

Standard
EN ISO 7590:2009
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2009
1DGRPHãþD
SIST EN ISO 7590:2002
1DSUDYHLQVLVWHPL]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY]
MHNOHQLPYORåNRP'RORþHYDQMHFHORWQHGHEHOLQHLQGHEHOLQH]DãþLWQHREORJH ,62

Steel cord conveyor belts - Methods for the determination of total thickness and cover
thickness (ISO 7590:2009)
Courroies transporteuses a câbles d'acier - Méthodes de détermination de l'épaisseur
totale de la courroie et de l'épaisseur des revetements (ISO 7590:2009)
Ta slovenski standard je istoveten z: EN ISO 7590:2009
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7590
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2009
ICS 53.040.20 Supersedes EN ISO 7590:2001
English Version
Steel cord conveyor belts - Methods for the determination of
total thickness and cover thickness (ISO 7590:2009)
Courroies transporteuses à câbles d'acier - Méthodes de
détermination de l'épaisseur totale et de l'épaisseur des
revêtements (ISO 7590:2009)
This European Standard was approved by CEN on 3 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7590:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 7590:2009) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2009, and conflicting national standards shall be withdrawn at the
latest by July 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7590:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7590:2009 has been approved by CEN as a EN ISO 7590:2009 without any modification.

INTERNATIONAL ISO
STANDARD 7590
Fifth edition
2009-01-15
Steel cord conveyor belts — Methods for
the determination of total thickness and
cover thickness
Courroies transporteuses à câbles d'acier — Méthodes de
détermination de l'épaisseur totale et de l'épaisseur des revêtements

Reference number
ISO 7590:2009(E)
©
ISO 2009
ISO 7590:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved

ISO 7590:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7590 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This fifth edition cancels and replaces the fourth edition (ISO 7590:2001), which has been technically revised.

INTERNATIONAL STANDARD ISO 7590:2009(E)

Steel cord conveyor belts — Methods for the determination of
total thickness and cover thickness
1 Scope
This International Standard specifies three methods for the measurement of total belt thickness and the
thickness of covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement
of both total belt thickness and c
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.