EN ISO 2418:2002

Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002)

ISO 2418:2002 specifies the location of a laboratory sample within a piece of leather and the method of labelling and marking the laboratory samples for future identification.
It is applicable to all types of leather derived from mammals irrespective of the tanning used.
It is not applicable to leathers derived from birds, fish or reptiles.

Leder - Chemische, physikalische Prüfungen und Echtheitsprüfungen - Probenahmestellung (ISO 2418:2002)

Diese Europäische Norm legt die Stelle der Probenahme von Prüfstücken innerhalb der Lederprobe fest und beschreibt die Beschilderung und die Kennzeichnung von Probestücken für zukünftige Identifizierung.
Sie ist für alle Lederarten anwendbar, sofern es sich um Säugetierleder handelt. Die Art der Gerbung ist unerheblich.
Sie ist nicht auf Fisch- und Reptilhäute oder auf Vogelleder anwendbar.

Cuir - Essais chimiques, physiques, mécaniques et de solidité - Emplacement de l'échantillonnage (ISO 2418:2002)

L'ISO 2418:2002 spécifie l'emplacement d'un échantillon pour laboratoire à prélever sur une pièce de cuir et la méthode d'étiquetage et de marquage des échantillons en vue de leur future identification.
Elle est applicable à tous les types de cuirs de mammifères, quel que soit le mode de tannage utilisé. Elle n'est pas applicable aux cuirs provenant d'oiseaux, de poissons ou de reptiles.

Usnje - Kemični, fizikalni in mehanski ter obstojnostni preskusi - Mesto vzorčenja (ISO 2418:2002)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2002
• Withdrawal Date: 14-Feb-2017
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 2 - Physical test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Feb-2017
• Ref Project: SIST EN ISO 2418:2003 - Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002)

Relations

• Replaced By: EN ISO 2418:2017 - Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017)
• Effective Date: 22-Feb-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Leder - Chemische, physikalische Prüfungen und Echtheitsprüfungen - Probenahmestellung (ISO 2418:2002)Cuir - Essais chimiques, physiques, mécaniques et de solidité - Emplacement de l'échantillonnage (ISO 2418:2002)Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 2418:2002SIST EN ISO 2418:2003en01-februar-2003SIST EN ISO 2418:2003SLOVENSKI
STANDARD



SIST EN ISO 2418:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 2418December 2002ICS 59.140.30English versionLeather - Chemical, physical and mechanical and fastness tests- Sampling location (ISO 2418:2002)Cuir - Essais chimiques, physiques, mécaniques et desolidité - Emplacement de l'échantillonnage (ISO2418:2002)Leder - Chemische, physikalische und mechanischePrüfungen und Echtheitsprüfungen - Probenahmestelle(ISO 2418:2002)This European Standard was approved by CEN on 8 June 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 2418:2002 ESIST EN ISO 2418:2003



EN ISO 2418:2002 (E)2CORRECTED
2003-09-24ForewordThis document (EN ISO 2418:2002) has been prepared by Technical Committee CEN/TC 289"Leather", the secretariat of which is held by UNI, in collaboration with the International Union ofLeather Technologists and Chemists Societies (IULTCS).It is based on Method IUP 2 and IUC 2 of the International Union of Leather Technologists andChemists Societies.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by June 2003, and conflicting nationalstandards shall be withdrawn at the latest by June 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of ISO 2418:2002 has been approved by CEN as EN ISO 2418:2002 without anymodifications.SIST EN ISO 2418:2003



Reference numberISO 2418:2002(E)IULTCS/IUP 2 and IUC 2© ISO 2002
INTERNATIONAL STANDARD ISO2418IULTCS/IUP 2 and IUC 2Second edition2002-12-15Leather — Chemical, physical and mechanical and fastness tests — Sampling location Cuir — Essais chimiques, physiques, mécaniques et de solidité — Emplacement de l’échantillonnage
SIST EN ISO 2418:2003



ISO 2418:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in
...