EN ISO 11363-1:2018/A1:2023
(Amendment)Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 1: Spezifikationen - Änderung 1 (ISO 11363-1:2018/Amd 1:2023)
No scope available
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1: Spécifications - Amendement 1 (ISO 11363-1:2018/Amd 1:2023)
Plinske jeklenke - Konična navoja 17E in 25E za priključitev ventila na plinsko jeklenko - 1. del: Specifikacije - Dopolnilo A1 (ISO 11363-1:2018/Amd 1:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11363-1:2018/A1:2023
01-november-2023
Plinske jeklenke - Konična navoja 17E in 25E za priključitev ventila na plinsko
jeklenko - 1. del: Specifikacije - Dopolnilo A1 (ISO 11363-1:2018/Amd 1:2023)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders -
Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit
Gasflaschen - Teil 1: Spezifikationen - Änderung 1 (ISO 11363-1:2018/Amd 1:2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur
les bouteilles à gaz - Partie 1: Spécifications - Amendement 1 (ISO 11363-1:2018/Amd
1:2023)
Ta slovenski standard je istoveten z: EN ISO 11363-1:2018/A1:2023
ICS:
21.040.30 Posebni navoji Special screw threads
23.020.35 Plinske jeklenke Gas cylinders
SIST EN ISO 11363-1:2018/A1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
EN ISO 11363-1:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - 17E and 25E taper threads for connection
of valves to gas cylinders - Part 1: Specifications -
Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le Gasflaschen - 17E und 25E kegeliges Gewinde zur
raccordement des robinets sur les bouteilles à gaz - Verbindung von Ventilen mit Gasflaschen - Teil 1:
Partie 1: Spécifications - Amendement 1 (ISO 11363- Spezifikationen - Änderung 1 (ISO 11363-1:2018/Amd
1:2018/Amd 1:2023) 1:2023)
This amendment A1 modifies the European Standard EN ISO 11363-1:2018; it was approved by CEN on 20 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11363-1:2018/A1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
EN ISO 11363-1:2018/A1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11363-1:2018/A1:2023
EN ISO 11363-1:2018/A1:2023 (E)
European foreword
This document (EN ISO 11363-1:2018/A1:2023) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 11363-1:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2024,
and conflicting national standards shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.