EN ISO 13000-2:2005

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)

ISO 13000-2:2005 specifies the preparation of test specimens and gives the test methods applicable to semi-finished products of polytetrafluoroethylene (PTFE).

Kunststoffe - Polytetrafluorethylen (PTFE)-Halbzeuge - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 13000-2:2005)

Dieser Teil von ISO 13000 legt die Herstellung von Probekörpern und die Prüfverfahren für Halbzeuge aus Polytetrafluorethylen (PTFE) fest.

Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 13000-2:2005)

L'ISO 13000-2:2005 spécifie le mode de préparation des éprouvettes et les méthodes d'essai applicables aux semi-produits en polytétrafluoroéthylène (PTFE).

Polimerni materiali – Polizdelki iz politetrafluoroetilena (PTFE) – 2. del: Priprava preskušancev in določanje lastnosti(ISO/DIS 13000-2:2004)

General Information

• Status: Withdrawn
• Publication Date: 14-Nov-2005
• Withdrawal Date: 31-Aug-2021
• ICS: 83.140.01 - Rubber and plastics products in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 11 - Fluoroplastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Sep-2021
• Ref Project: SIST EN ISO 13000-2:2006 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)

Relations

• Replaces: EN ISO 13000-2:1997 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of specimens and determination of properties (ISO 13000-2:1997)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 13000-2:2021 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13000-2:2006
01-april-2006
1DGRPHãþD
SIST EN ISO 13000-2:1999
3ROLPHUQLPDWHULDOL±3ROL]GHONLL]SROLWHWUDIOXRURHWLOHQD37)(±GHO3ULSUDYD
SUHVNXãDQFHYLQGRORþDQMHODVWQRVWL,62',6
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of
test specimens and determination of properties (ISO 13000-2:2005)
Kunststoffe - Polytetrafluorethylen (PTFE)-Halbzeuge - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften (ISO 13000-2:2005)
Plastiques - Semi-produits en polytétrafluoroéthylene (PTFE) - Partie 2: Préparation des
éprouvettes et détermination des propriétés (ISO 13000-2:2005)
Ta slovenski standard je istoveten z: EN ISO 13000-2:2005
ICS:
83.140.01 Izdelki iz gume in polimernih Rubber and plastics products
materialov na splošno in general
SIST EN ISO 13000-2:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13000-2:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 13000-2:2006
EUROPEAN STANDARD
EN ISO 13000-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 83.140.01 Supersedes EN ISO 13000-2:1997
English Version
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products
- Part 2: Preparation of test specimens and determination of
properties (ISO 13000-2:2005)
Plastiques - Semi-produits en polytétrafluoroéthylène Kunststoffe - Polytetrafluorethylen (PTFE)-Halbzeuge - Teil
(PTFE) - Partie 2: Préparation des éprouvettes et 2: Herstellung von Probekörpern und Bestimmung von
détermination des propriétés (ISO 13000-2:2005) Eigenschaften (ISO 13000-2:2005)
This European Standard was approved by CEN on 4 November 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13000-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13000-2:2006

EN ISO 13000-2:2005 (E)





Foreword


This document (EN ISO 13000-2:2005) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2006, and conflicting national standards
shall be withdrawn at the latest by May 2006.

This document supersedes EN ISO 13000-2:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 13000-2:2005 has been approved by CEN as EN ISO 13000-2:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13000-2:2006

INTERNATIONAL ISO
STANDARD 13000-2
Second edition
2005-11-15

Plastics — Polytetrafluoroethylene
(PTFE) semi-finished products —
Part 2:
Preparation of test specimens and
determination of properties
Plastiques — Semi-produits en polytétrafluoroéthylène (PTFE) —
Partie 2: Préparation des éprouvettes et détermination des propriétés




Reference number
ISO 13000-2:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 13000-2:2006
ISO 13000-2:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adob
...