EN 12229:2007
(Main)Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
This European Standard specifies a procedure for the preparation of test pieces of synthetic turf and needle-punch sports surfaces.
Sportböden - Verfahren zur Herstellung von Probekörpern aus Kunststoffrasen und textilen Belägen
Sols sportifs - Méthode de préparation d'éprouvettes en textile aiguilleté et en gazon synthétique
Podloge za športne dejavnosti – Postopek priprave preskušancev iz umetne trave in šivanih tekstilnih podlog
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test piecesPodloge za športne dejavnosti – Postopek priprave preskušancev iz umetne trave in šivanih tekstilnih podlogSols sportifs - Méthode de préparation d'éprouvettes en textile aiguilleté et en gazon synthétiqueSportböden - Verfahren zur Herstellung von Probekörpern aus Kunststoffrasen und textilen BelägenTa slovenski standard je istoveten z:EN 12229:2007SIST EN 12229:2007en97.220.10Športni objektiSports facilities97.150Netekstilne talne oblogeNon-textile floor coverings59.080.60Tekstilne talne oblogeTextile floor coveringsICS:SIST EN 12229:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 12229:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12229March 2007ICS 59.080.60; 97.220.10; 97.150Supersedes EN 12229:1999
English VersionSurfaces for sports areas - Procedure for the preparation ofsynthetic turf and needle-punch test piecesSols sportifs - Méthode de préparation d'éprouvettes entextile aiguilleté et en gazon synthétiqueSportböden - Verfahren zur Herstellung von Probekörpernaus Kunststoffrasen und textilen BelägenThis European Standard was approved by CEN on 4 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12229:2007: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.