EN ISO 19900:2013

Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2013)

ISO 19900:2013 specifies general principles for the design and assessment of offshore structures subjected to known or foreseeable types of actions. These general principles are applicable worldwide to all types of offshore structures, including, bottom-founded structures as well as floating structures, and to all types of materials used including steel, concrete and aluminium.
ISO 19900:2013 specifies design principles that are applicable to:
the successive stages in the construction of the structure (i.e. fabrication, transportation and installation);
use during its intended life; and
its decommissioning.
The principles are also generally applicable to the assessment or modification of existing structures. Aspects related to quality control are also addressed.
ISO 19900:2013 is applicable to the design of complete structures, including substructures, topsides structures, vessel hulls, foundations and mooring systems.

Erdöl- und Erdgasindustrie - Allgemeine Anforderungen an Offshore-Bauwerke (ISO 19900:2013)

Industries du pétrole et du gaz naturel - Exigences générales pour les structures en mer (ISO 19900:2013)

L'ISO 19900:2013 spécifie les principes généraux régissant la conception et l'évaluation de structures en mer soumises à des types d'actions connus ou prévisibles. Ces principes généraux sont applicables dans toutes les parties du monde, à tous les types d'ouvrages en mer, aussi bien les structures prenant appui sur le fond marin que les structures flottantes, ainsi qu'à tous les types de matériaux utilisés, y compris l'acier, le béton et l'aluminium.
L'ISO 19900:2013 spécifie les principes de conception qui s'appliquent également à:
? la construction pendant ses étapes successives (c'est-à-dire, la fabrication, le transport et l'installation);
? l'utilisation de la structure pendant sa durée de vie escomptée; et
? son abandon.
Généralement, ces principes sont également applicables à la réévaluation ou à la modification de structures existantes. Les aspects liés aux contrôles de qualité sont aussi traités dans cette norme.
L'ISO 19900:2013 s'applique à la conception des structures dans leur ensemble, ce qui comprend les substructures, les superstructures, les coques, les fondations et les systèmes d'ancrage.

Industrija za predelavo nafte in zemeljskega plina - Splošne zahteve za vrtalne ploščadi (ISO 19900:2013)

General Information

• Status: Withdrawn
• Publication Date: 10-Dec-2013
• Withdrawal Date: 09-Jul-2019
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Jul-2019
• Ref Project: SIST EN ISO 19900:2014 - Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2013)

Relations

• Replaces: EN ISO 19900:2002 - Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002)
• Effective Date: 14-Dec-2011
• Replaced By: EN ISO 19900:2019 - Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2019)
• Effective Date: 17-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2014
1DGRPHãþD
SIST EN ISO 19900:2004
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD6SORãQH]DKWHYH]DYUWDOQH
SORãþDGL,62
Petroleum and natural gas industries - General requirements for offshore structures (ISO
19900:2013)
Erdöl- und Erdgasindustrie - Allgemeine Anforderungen an Offshore-Bauwerke (ISO
19900:2013)
Industries du pétrole et du gaz naturel - Exigences générales pour les structures en mer
(ISO 19900:2013)
Ta slovenski standard je istoveten z: EN ISO 19900:2013
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 19900
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2013
ICS 75.180.10 Supersedes EN ISO 19900:2002
English Version
Petroleum and natural gas industries - General requirements for
offshore structures (ISO 19900:2013)
Industries du pétrole et du gaz naturel - Exigences Erdöl- und Erdgasindustrie - Allgemeine Anforderungen an
générales pour les structures en mer (ISO 19900:2013) Offshore-Bauwerke (ISO 19900:2013)
This European Standard was approved by CEN on 19 October 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19900:2013 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 19900:2013) has been prepared by Technical Committee ISO/TC 67 “Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at
the latest by June 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19900:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19900:2013 has been approved by CEN as EN ISO 19900:2013 without any modification.

INTERNATIONAL ISO
STANDARD 19900
Second edition
2013-12-15
Petroleum and natural gas
industries — General requirements
for offshore structures
Industries du pétrole et du gaz naturel — Exigences générales pour
les structures en mer
Reference number
ISO 19900:2013(E)
©
ISO 2013
ISO 19900:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 19900:2013(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 6
4.1 Symbols . 6
4.2 Abbreviated terms . 7
5 General requirements and conditions . 8
5.1 General . 8
5.2 Fundamental requirements . 8
5.3 Robustness . 8
5.4 Planning . 9
5.5 Durability, maintenance and inspection . 9
5.6 Hazards .10
5.7 Design basis .10
5.8 Service requirements .10
5.9 Operating requirements.11
5.10 Special requirements .11
5.11 Location and orientation .11
5.12 Structural configuration .12
5.13 Environmental conditions .14
5.14 Construction and deployment .18
5.15 Decommissioning and removal .18
6 Exposure levels.18
6.1 General .18
6.2 Life-safety categories .19
6.3 Consequence categories .20
6.4 Determination of exposure level .21
7 Limit states design .22
7.1 Limit states .22
7.2 Design .23
8 Basic variables .24
8.1 General .24
8.2 Actions .24
8.3 Resistances .26
9 Partial factor design approach .27
9.1 Principles .27
9.2 Actions and their combinations .28
9.3 Properties of materials and soils .30
9.4 Geometric parameters .31
9.5 Uncertainties of calculation models .31
9.6 Values for partial factors.31
9.7 Structural reliability analysis .32
10 Models and a
...