prEN ISO 4064-3
(Main)Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS 4064-3:2023)
Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS 4064-3:2023)
ISO 4064-3:2014|OIML R 49-3:2013 specifies a test report format to be used in conjunction with ISO 4064-1:2014|OIML R 49-1:2013 and ISO 4064-2:2014|OIML R 49-2:2013 for water meters for cold potable water and hot water.
Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 3: Format des Prüfberichtes (ISO/DIS 4064-3:2023)
Dieser Teil von ISO 4064|OIML R 49 legt ein Prüfberichtformat fest, das in Verbindung mit ISO 4064 1|OIML R 49 1 und ISO 4064 2|OIML R 49 2 für Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser anzuwenden ist.
Compteurs d'eau potable froide et d'eau chaude - Partie 3: Format du rapport d'essais (ISO/DIS 4064-3:2023)
L'ISO 4064-3:2014|OIML R 49-3:2013 spécifie le format du rapport d'essai à utiliser dans le contexte de la mise en oeuvre de l'ISO 4064‑1:2014|OIML R 49-1:2013 et de l'ISO 4064‑2:2014|OIML R 49-2:2013 pour les compteurs d'eau potable froide et d'eau chaude.
Vodomeri za merjenje hladne pitne vode in vroče vode - 3. del: Obrazec za poročilo o preskusu (ISO/DIS 4064-3:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2023
Vodomeri za merjenje hladne pitne vode in vroče vode - 3. del: Obrazec za
poročilo o preskusu (ISO/DIS 4064-3:2023)
Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS
4064-3:2023)
Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 3: Format
des Prüfberichtes (ISO/DIS 4064-3:2023)
Compteurs d'eau potable froide et d'eau chaude - Partie 3: Format du rapport d'essais
(ISO/DIS 4064-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 4064-3
ICS:
17.120.10 Pretok v zaprtih vodih Flow in closed conduits
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4064-3
ISO/TC 30/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-10-09 2024-01-01
Water meters for cold potable water and hot water —
Part 3:
Test report format
Compteurs d'eau potable froide et d'eau chaude —
Partie 3: Format du rapport d'essais
ICS: 91.140.60
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4064-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
ISO/DIS 4064-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4064-3
ISO/TC 30/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
Water meters for cold potable water and hot water —
Part 3:
Test report format
Compteurs d'eau potable froide et d'eau chaude —
Partie 3: Format du rapport d'essais
ICS: 91.140.60
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4064-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
ISO/DIS 4064-3:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols, and abbreviated terms . 1
4 Type evaluation report . 1
4.1 General . 1
4.2 Information concerning the type . 2
4.2.1 General . 2
4.2.2 Model submitted . 2
4.2.3 Mechanical water meter (complete or combined) . 3
4.2.4 Electronic water meter (complete or combined) . 4
4.2.5 Separable calculator (including indicating device) . 6
4.2.6 Separable measurement transducer (including flow or volume sensor) . 7
4.2.7 Supplementary electronic device(s) used for testing (permanently
attached to meter) . . 9
4.2.8 Supplementary electronic device(s) used for data transmission
(permanently attached to meter) . 9
4.2.9 Supplementary electronic device(s) used for testing (temporarily attached
to meter) . 10
4.2.10 Supplementary electronic device(s) used for data transmission
(temporarily attached to meter) . 10
4.2.11 Ancillary devices . 11
4.2.12 Documents concerning the type . 11
4.3 General information concerning the test equipment . 11
4.4 Check list for water meter examinations and performance tests.12
4.4.1 Check list for water meter examinations .12
4.4.2 Checklist for water meter performance tests . 17
4.5 Type evaluation tests (for all water meters) . 23
4.5.1 Static pressure test (ISO 4064-2:2014|OIML R 49-2:2013, 7.3) .23
4.5.2 Determination of changeover flow rates for combination meters (ISO 4064-
2:2014|OIML R 49-2:2013, 7.4.3) . 23
4.5.3 Determination of the intrinsic errors (of indication) and the effects of
meter orientation (ISO 4064-2:2014|OIML R 49-2:2013, 7.4.4) . 24
4.5.4 Interchange test on all types of cartridge meters and meters with
exchangeable metrological modules (ISO 4064-1:2014|OIML R 49-1:2013,
7.2.7, ISO 4064-2:2014|OIML R 49-2:2013, 7.4.4, 7.4.6) . 27
4.5.5 Water temperature test (ISO 4064-2:2014|OIML R 49-2:2013, 7.5) and
overload water temperature test (ISO 4064-2:2014|OIML R 49-2:2013, 7.6) .29
4.5.6 Water pressure test (ISO 4064-2:2014|OIML R 49-2:2013, 7.7) .30
4.5.7 Reverse flow test (ISO 4064-2:2014|OIML R 49-2:2013, 7.8) . 31
4.5.8 Pressure-loss test (ISO 4064-2:2014|OIML R 49-2:2013, 7.9) .33
4.5.9 Flow disturbance tests (ISO 4064-2:2014|OIML R 49-2:2013, 7.10, Annex C) .34
4.5.10 Durability tests (ISO 4064-2:2014|OIML R 49-2:2013, 7.11) .36
4.5.11 Static magnetic field test (ISO 4064-2:2014|OIML R 49-2:2013, 7.12, 8.16) . 42
4.5.12 Tests on ancillary devices of a water meter (ISO 4064-2:2014|OIML R 49-
2:2013, 7.13). 43
4.6 Type evaluation tests (for electronic water meters and mechanical water meters
with electronic components) .46
4.6.1 Dry heat (non-condensing) (ISO 4064-2:2014|OIML R 49-2:2013, 8.2) .46
4.6.2 Cold (ISO 4064-2:2014|OIML R 49-2:2013, 8.3) . 47
4.6.3 Damp heat, cyclic (condensing) (ISO 4064-2:2014|OIML R 49-2:2013, 8.4) .48
4.6.4 Power supply variation (ISO 4064-2:2014|OIML R 49-2:2013, 8.5) .50
iii
ISO/DIS 4064-3:2023(E)
4.6.5 Vibration (random) (ISO 4064-2:2014|OIML R 49-2:2013, 8.6). 51
4.6.6 Mechanical shock (ISO 4064-2:2014|OIML R 49-2:2013, 8.7) . 52
4.6.7 AC mains voltage dips, short interruptions and voltage variations
(ISO 4064-2:2014|OIML R 49-2:2013, 8.8) .53
4.6.8 Bursts on signal lines (ISO 4064-2:2014|OIML R 49-2:2013, 8.9) .54
4.6.9 Bursts (transients) on AC and DC mains (ISO 4064-2:2014|OIML R 49-
2:2013, 8.10) .56
4.6.10 Electrostatic discharge (ISO 4064-2:2014|OIML R 49-2:2013, 8.11) . 57
4.6.11 Radiated electromagnetic field (ISO 4064-2:2014|OIML R 49-2:2013, 8.12) .58
4.6.12 Conducted electromagnetic field (ISO 4064-2:2014|OIML R 49-2:2013, 8.13) .60
4.6.13 Surges on signal, data and control lines (ISO 4064-2:2014|OIML R 49-
2:2013, 8.14) (applicable only for environmental class E2) . 61
4.6.14 Surges on AC and DC mains power lines (ISO 4064-2:2014|OIML R 49-
2:2013, 8.15) (applicable only for environmental class E2) .63
4.6.15 Absence of flow test (ISO 4064-2:2014|OIML R 49-2:2013, 8.17) . 67
5 Initial verification report .68
5.1 General .68
5.2 Information concerning the EUT verified .68
5.3 Initial verification test report (ISO 4064-2:2014|OIML R 49-2:2013, Clause 10) .69
Annex A (normative) List of documents concerning the type (ISO 4064-1:2014|OIML R 49-
1:2013, 7.2.9) .73
iv
ISO/DIS 4064-3:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenanc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.