EN ISO 11127-3:1997

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)

The procedure includes drying a sufficient quantity of the sample by heating, allowing to cool to room temperature, adding distilled or deionized water to the cleaned, dried and weighed pyknometer containing 10 g of the dried sample until it is completely filled, displacing air adhering to the test portion, drying the outside of the pyknometer, reweighing the pyknometer and its contents, emptying the pyknometer, refilling with distilled or deionized water, drying the outside and weighing again. Annex A gives information on the international standards series for non-metallic blast-cleaning abrasives ISO 11126 and ISO 11127.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für nichtmetallische Strahlmittel - Teil 3: Bestimmung der scheinbaren Dichte (ISO 11127-3:1993)

Dieser Teil von ISO 11127 legt ein Verfahren zur Bestimmung der scheinbaren Dichte von nichtmetallischen Strahlmitteln fest.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 3: Détermination de la masse volumique apparente (ISO 11127-3:1993)

La présente norme est l'une des parties de l'ISO 11127, qui traite de l'échantillonnage et des essais des abrasifs non métalliques destinés à la préparation par projection. Les types d'abrasifs non métalliques et les prescriptions relatives à chacun figurent dans les différentes parties de l'ISO 11126. Les séries des normes ISO 11126 et ISO 11127 constituent une série cohérente de normes internationales sur les abrasifs non métalliques destinés à la préparation par projection. Des informations sur toutes les parties des deux séries sont données dans l'annexe A. La présente partie de l'ISO 11127 prescrit une méthode pour la détermination de la masse volumique apparente des abrasifs non métalliques destinés à la préparation par projection.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za nekovinske granulate za peskanje - 3. del: Ugotavljanje navidezne gostote (ISO 11127-3:1993)

General Information

• Status: Withdrawn
• Publication Date: 22-Jul-1997
• Withdrawal Date: 14-Dec-2011
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2011
• Completion Date: 15-Dec-2011
• Ref Project: SIST EN ISO 11127-3:1997 - Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)

Relations

• Replaced By: EN ISO 11127-3:2011 - Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za nekovinske granulate za peskanje - 3. del: Ugotavljanje navidezne gostote (ISO 11127-3:1993)Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für nichtmetallische Strahlmittel - Teil 3: Bestimmung der scheinbaren Dichte (ISO 11127-3:1993)Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés a la préparation par projection - Partie 3: Détermination de la masse volumique apparente (ISO 11127-3:1993)Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)25.220.10Priprava površineSurface preparationICS:Ta slovenski standard je istoveten z:EN ISO 11127-3:1997SIST EN ISO 11127-3:1997en01-december-1997SIST EN ISO 11127-3:1997SLOVENSKI
STANDARD
INTERNATIONAL STANDARD ISO 11127-3 First edition 19934 2-15 Preparation of steel Substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density Phparation des subjectiles d’acier avant application de peintures et de produits assimiks - M&hodes d’essai pour abrasifs non metalliques destink a Ia prkparation par projection - Partie 3: D&ermination de Ia masse volumique apparente Reference number ISO 1112737 993(E) SIST EN ISO 11127-3:1997

ISO 11127=3:1993(E) Foreword BS0 (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (1 EC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % 0% the member bodies casting a vote. International Standard ISO 11127-3 was prepared by Technical Committee SSO/K 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel Substrates before application of paints and related products. ISO 11127 consists of the following Parts, under the general title Prep- aration of steel Substrates before application of paints and related products - Test me thods for non-metallic blas t-cleaning abrasives: - Part 1: Sampling - Part 2: Determination of particle size distribution - Part 3: Determination of apparent density - Part 4: Assessment of hardness by a glass slide test - Part 5: Determination of moisture - Part 6: Determination of wa ter-soluble con taminants by conductivity measurement - Part 7: Determination o f wa ter-soluble chlorides - Part 8: Determination of abrasive mechanical properties 0 ISO 1993 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-I 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 11127-3:1997

0 ISO ISO 11127=3:1993(E) At the time sf publication of this part 0% ISO 11127, part 8 was in course of preparation. Annex A of this part of ISO 11127 is for information only. SIST EN ISO 11127-3:1997

This page intentionally left blank SIST EN ISO 11127-3:1997

INTERNATIONAL STANDARD 0 ISO ISO 11127=3:1993(E] Preparation of steel Substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination sf apparent density 1 Scope This is one of a number of Parts of ISO 111127 dealing with the sampling and testing of non-metallic abras- ives for blast-cleaning. The types of non-metallic abrasive and require- ments on each are contained in the various Parts of ISO 11126. The ISO 1 ‘ll26 and ISO %% 127 series have been drafted as a coherent set of International Standards an non-metallic blast-cleaning abrasives. Information on all Parts of both series is given in annex A. This part of ISO 11127 specifies a method for the determination of the apparent density of non-metallic blast-cleaning abrasives. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 11127. At the time of publication, the editions indicated were valid. All Standards are subject t
...