Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods

This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings (as defined in 3.1).
It includes a classification system, based on EN ISO 10874, providing practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. in domestic kitchens. This standard does not specify requirements relating to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.

Laminatböden - Direktbedruckte Elemente mit Kunstharz-Deckschicht - Spezifikationen, Anforderungen und Prüfverfahren

"Für Laminatböden werden die Anwendungsgebiete "Wohnen" und "Gewerblich" berücksichtigt, z. B. für die Verwendung in Küchen im Wohnbereich. Diese Norm legt keine Anforderungen für Bereiche fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen."
wird ersetzt durch
"Laminatböden sind im Allgemeinen zur schwimmenden Verlegung in den Anwendungsgebieten "Wohnen" und "Gewerblich" bestimmt, einschließlich einer Verwendung in Küchen im Wohnbereich. Dieses Dokument legt keine Anforderungen für die Verwendung in Bereichen fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen. Im Allgemeinen können Laminatböden in diesen Bereichen nur verwendet werden, wenn dies durch den Hersteller erklärt wird und unter den in den Installationsrichtlinien des Herstellers beschriebenen Bedingungen.".

Revêtements de sol stratifiés - Éléments comportant une couche d'impression appliquée directement et une couche de surface à base de résine - Spécifications, exigences et méthodes d'essai

Laminatne talne obloge - Elementi z direktnim nanosom potiska in sloja iz umetne smole - Specifikacije, zahteve in preskusne metode

General Information

Status
Not Published
Publication Date
19-Dec-2021
Withdrawal Date
20-Mar-2022
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
17-Jun-2021
Due Date
07-Mar-2022
Completion Date
17-Jun-2021

Relations

Buy Standard

Draft
EN 15468:2016/oprA1:2020
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN 15468:2016/oprA1:2020
01-julij-2020
Laminatne talne obloge - Elementi z direktnim nanosom potiska in sloja iz umetne
smole - Specifikacije, zahteve in preskusne metode
Laminate floor coverings - Elements with directly applied printing and resin surface layer
- Specifications, requirements and test methods
Laminatböden - Direktbedruckte Elemente mit Kunstharz-Deckschicht - Spezifikationen,
Anforderungen und Prüfverfahren
Revêtements de sol stratifiés - Éléments comportant une couche d'impression appliquée
directement et une couche de surface à base de résine - Spécifications, exigences et
méthodes d'essai
Ta slovenski standard je istoveten z: EN 15468:2016/prA1
ICS:
97.150 Talne obloge Floor coverings
SIST EN 15468:2016/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 15468:2016/oprA1:2020
SIST EN 15468:2016/oprA1:2020
DRAFT
EUROPEAN STANDARD
EN 15468:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2020
ICS 97.150
English Version
Laminate floor coverings - Elements with directly applied
printing and resin surface layer - Specifications,
requirements and test methods
Revêtements de sol stratifiés - Éléments comportant Laminatböden - Direktbedruckte Elemente mit
une couche d'impression appliquée directement et une Kunstharz-Deckschicht - Spezifikationen,
couche de surface à base de résine - Spécifications, Anforderungen und Prüfverfahren
exigences et méthodes d'essai
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A1, if approved, will modify the European Standard EN 15468:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15468:2016/prA1:2020 E
worldwide for CEN national Members.

SIST EN 15468:2016/oprA1:2020
EN 15468:2016/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modification to Clause 1, Scope . 4
2 Modification to term 3.3, substrate . 4
3 Modification to 4.2, Classification requirements, Table 1 . 4

SIST EN 15468:2016/oprA1:2020
EN 15468:2016/prA1:2020 (E)
European foreword
This document (EN 15468:2016/prA1:2020) has been prepared by Technical Committee CEN/TC 134
“Resilient, textile and laminate floor covering”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.