iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 16798-14:2017

(Main)

Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation

Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation

This Technical Report refers to the standard EN 16798-13.
It contains information to support the correct understanding and use of this standard.

Energieeffizienz von Gebäuden - Lüftung von Gebäuden - Teil 14: Interpretation der Anforderungen der EN 16798-13 - Berechnung von Kühlsystemen (Modul M4-8) - Erzeugung

Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 14 : Interprétation des exigences de l'EN 16798-13 - Calcul des systèmes de refroidissement (Module M4-8) - Génération

Le présent rapport technique fait référence à l'EN 16798-13.
Il contient des informations permettant d’assurer une compréhension et une utilisation correctes de cette norme.
Le présent rapport technique ne contient pas de disposition normative.

Energijske lastnosti stavb - Prezračevanje stavb - 14. del: Razlaga in utemeljitev EN 16798-13 - Izračun za hladilne sisteme - Modul M4-8 - Proizvodnja

To tehnično poročilo se nanaša na standard EN 16798-13.
Vsebuje informacije za pomoč pri pravilnem razumevanju in uporabi tega standarda.

General Information

Status
Published
Publication Date
20-Jun-2017
ICS
91.120.10 - Thermal insulation of buildings
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
CEN/TC 156 - Ventilation for buildings
Drafting Committee
CEN/TC 156/WG 21 - Revision of calculation standards EN15241, 15242 and 15243
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Jun-2017
Due Date
15-Nov-2015
Completion Date
21-Jun-2017
Directive
2010/31/EU - Directive 2010/31/eu of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)
Mandate
M/480 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance buildings (2010/31/EU)
Ref Project
SIST-TP CEN/TR 16798-14:2018 - Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation

Relations

Replaces
EN 15243:2007 - Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems
Effective Date
08-Jun-2022

Buy Standard

TP CEN/TR 16798-14:2018 - BARVETP CEN/TR 16798-14:2018 - BARVE
PreviousNext
Technical report
TP CEN/TR 16798-14:2018 - BARVE
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 16798-14:2018
01-julij-2018
1DGRPHãþD
SIST EN 15243:2007
(QHUJLMVNHODVWQRVWLVWDYE3UH]UDþHYDQMHVWDYEGHO5D]ODJDLQXWHPHOMLWHY
(1,]UDþXQ]DKODGLOQHVLVWHPH0RGXO03URL]YRGQMD
Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the
requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) -
Generation
Energieeffizienz von Gebäuden - Lüftung von Gebäuden - Teil 14: Interpretation der
Anforderungen der EN 16798-13 - Berechnung von Kühlsystemen (Modul M4-8) -
Erzeugung
Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 14 :
Interprétation des exigences de l'EN 16798-13 - Calcul des systèmes de refroidissement
(Module M4-8) - Génération
Ta slovenski standard je istoveten z: CEN/TR 16798-14:2017
ICS:
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning systems
SIST-TP CEN/TR 16798-14:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 16798-14:2018

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 16798-14:2018


CEN/TR 16798-14
TECHNICAL REPORT

RAPPORT TECHNIQUE

June 2017
TECHNISCHER BERICHT
ICS 91.140.30; 91.120.10 Supersedes EN 15243:2007
English Version

Energy performance of buildings - Ventilation for buildings
- Part 14: Interpretation of the requirements in EN 16798-
13 - Calculation of cooling systems (Module M4-8) -
Generation
 Energieeffizienz von Gebäuden - Lüftung von
Gebäuden - Teil 14: Interpretation der Anforderungen
der EN 16798-13 - Berechnung von Kühlsystemen
(Modul M4-8) - Erzeugung


This Technical Report was approved by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN/TC
156.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16798-14:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 16798-14:2018
CEN/TR 16798-14:2017 (E)
Contents Page
European foreword . 4
Introduction . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 Symbols, subscripts and abbreviations. 9
5 Brief description of the methods and routing . 9
5.1 Output of the method . 9
5.2 General description of the methods . 9
5.2.1 Method A. 9
5.2.2 Method B. 10
5.3 Selection criteria between the methods . 10
6 Calculation method - Method A . 11
6.1 Output data .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16798-5-2:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation
SIST EN 16798-5-2:2018

This European Standard covers energy performance calculation of mechanical ventilation systems with integrated heating/cooling generation, including domestic hot water production, using a monthly or seasonal calculation interval or a bin method. It takes into account the generation (air handling unit) and distribution (duct system) parts. It does not cover the emission part (calculation of the required volume flow rates and/or supply air conditions), which is covered in the M5-5 standard. It does not include humidification and dehumidification. This method is focussed on small, packaged ventilation systems, typically used in residential buildings, although the application is not restricted on the basis of building or space use type.
A calculation method for mechanical ventilation and air conditioning systems, including humidification and dehumidification, using an hourly calculation interval or a bin method, is provided in a separate standard, EN 16798 5 1.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.
NOTE 1   In CEN ISO/TR 52000 2, the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16798-3:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
SIST EN 16798-3:2018

This European Standard applies to the design, energy performance of buildings and implementation of ventilation, air conditioning and room conditioning systems for non-residential buildings subject to human occupancy, excluding applications like industrial processes. It focuses on the definitions of the various parameters that are relevant for such systems.
The guidance for design given in this European Standard and accompanying FprCEN/TR 16798-4 are mainly applicable to mechanical supply and/or exhaust ventilation systems. Natural ventilation systems or natural parts of hybrid ventilation systems are not covered by this European Standard. Reference is made to the Technical Report for informative guidance on the design of such systems.
Applications for residential ventilation are not dealt with in this European Standard. Performance of ventilation systems in residential buildings are dealt with in EN 15665 and CEN/TR 14788.
The classification uses different categories. For some values, examples are given and, for requirements, typical ranges with default values are presented. The default values given in this European Standard are not normative as such, and should be used where no other values are specified. Classification should always be appropriate to the type of building and its intended use, and the basis of the classification should be explained if the examples given in the European Standard are not to be used.
NOTE 1   Different standards may express the categories for the same parameters in a different way, and also the category symbols may be different.
Table 1 shows the relative position of this European Standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1 .
NOTE 2   In FprCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 3   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16798-16:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 16: Interpretation of the requirements in EN 16798-15 - Calculation of cooling systems (Module M4-7) - Storage
SIST-TP CEN/TR 16798-16:2018

This Technical Report refers to the standard EN 16798-15.
It contains information to support the correct understanding, use and national adaptation of this standard.

  • Technical report
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16798-6:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 6: Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2 - Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8)
SIST-TP CEN/TR 16798-6:2018

This Technical Report refers to standards EN 16798 5 1 and EN 16798 5 2.
It contains information to support the correct understanding and use of these standards.
This Technical Report does not contain any normative provision.

  • Technical report
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16798-10:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 10: Interpretation of the requirements in EN 16798-9 - Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9) - General
SIST-TP CEN/TR 16798-10:2018

This Technical Report refers to the standard FprEN 16798-9.
It contains information to support the correct understanding, use and national adaptation this standard.

  • Technical report
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16798-18:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)
SIST-TP CEN/TR 16798-18:2018

This Technical Report refers to standard EN 16798-17:2017, module M4-11, M5-11, M6-11 and M7-11.
It contains information to support the correct understanding and use of this standard.
This Technical Report does not contain any normative provision.
Information regarding features affecting the frequency and duration of inspection is included in 5.2.

  • Technical report
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16798-13:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation
SIST EN 16798-13:2018

This European Standard covers the calculation of the operational parameters and the energy consumption of cooling generation systems. The cooling generation consists of:
-   cooling generators like compression and absorption chillers;
-   other (generic) generator types such as ground or surface water or direct use of ground heat from boreholes; and
-   different types of heat rejection (dry, wet, hybrid with outdoor air, other sink types).
The methods cover:
-   the possibility of heat recovery of heat to be rejected for the use of heating and/or domestic hot water production, through the use of an interface to the M3-1 standard; and
-   a multi generator calculation.
The document does not cover the cooling emission, distribution and storage systems, which are covered by the Module M4-5, M4-6 and M4-7 standards, respectively. It is directly connected to the general part of the cooling systems, the M4-1 standard.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000 1:2015.
NOTE 1   In FprCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying Technical Reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Table 1 - Position of this standard (in casu M4–8) within the modular structure of the set of EPB standards
...

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16798-8:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 8: Interpretation of the requirements in EN 16798-7 - Calculation methods for the determination of air flow rates in buildings including infiltration - (Module M5-5)
SIST-TP CEN/TR 16798-8:2018

This Technical Report refers to the standard EN 16798-7.
It contains information to support the correct understanding and use of this standard.

  • Technical report
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16798-9:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General
SIST EN 16798-9:2018

This European Standard covers the energy performance calculation of complete cooling systems. It gives a calculation method that defines how to collect the cooling energy requirements from the thermal zones and from the air handling units connected to a distribution system, and how to aggregate multiple distribution systems to an overall system energy requirement. It incorporates the calculation of the emission and distribution losses and auxiliary energy. The required cooling energy to be extracted by the cooling generation system is calculated, and the cooling energy storage is considered. It gives a method on how to dispatch the cooling energy provided by the cooling generation to different distribution systems, and possible priorities are considered.
This European Standard defines energy performance indicators for cooling systems.
Table 1 shows the relative position of this standard within the EPB package of standards in the context of the modular structure as set out in prEN ISO 52000-1.
NOTE 1   In prCEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16798-15:2017(Main)
Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage
SIST EN 16798-15:2018

This European Standard specifies a calculation method for the energy performance of storage systems used for ventilation systems. It takes into account the energy performance of storage systems using water from phase change material (PCM) to store cooling energy. This standard presents a general method applicable to the different technologies of water-based storage systems or PCM related controls systems. It does not cover the cooling emission, distribution and generation that are covered by EN 15316 2, EN 15316 3 and EN 16798-13 respectively.
The standard covers typically hourly time steps but can be adapted to different time steps accordingly with the scenarios used for energy use and energy delivered or to bin method.
A simplified method is provided for monthly or annual time step.
This standard does not cover:
-   the cooling emission, distribution and generation systems; or
-   sizing or inspection of such storage systems.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000 1:2015.
NOTE 1   In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Table 1 - Position of this standard (in casu M4-7) within the EPB set of standards
...

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day