Leather - Requirements for the determination of the origin of leather production

This document defines the requirements that are necessary to confer the origin of leather production based on the principle of the last substantial transformation according to Non-Preferential Rules of Origin.
This document is applicable to leather only and it is applicable also to leather with hair. Furs are excluded.
The country of origin of raw hides and skins isn’t relevant for the application of this document.

Leder - Anforderungen an die Bestimmung der Herkunft von Leder

Dieses Dokument legt die notwendigen Anforderungen fest, um die Herkunft der Lederherstellung, basierend auf dem Prinzip der letzten wesentlichen Be  oder Verarbeitung nach den nicht präferenziellen Ursprungsregeln festzulegen.
Dieses Dokument ist nur für Leder und auch für Leder mit Haarkleid anwendbar. Pelze sind ausgeschlossen.
Das Herkunftsland von Rohhäuten und  fellen ist für die Anwendung dieses Dokumentes nicht relevant.

Cuir - Exigences relatives à la détermination de l'origine de la production du cuir

Le présent document définit les exigences requises pour déterminer l'origine de la production du cuir, en appliquant le principe de dernière transformation substantielle conformément aux règles d'origine non préférentielle.
Le présent document est applicable uniquement au cuir, y compris au cuir pourvu de poils.  Il n'est pas applicable aux fourrures.
Le pays d'origine des peaux brutes n'est pas pertinent pour l'application du présent document

Usnje - Zahteve za ugotavljanje porekla proizvodnje usnja

Ta dokument določa zahteve, ki so potrebne za ugotavljanje porekla proizvodnje usnja na podlagi načela zadnje bistvene predelave v skladu z nepreferenčnimi pravili o poreklu.
Ta dokument se uporablja samo za usnje, vključno z usnjem z dlako. Krzno je izključeno.
Država porekla surovih kož za uporabo tega dokumenta ni pomembna.

General Information

Status
Published
Publication Date
26-Sep-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Sep-2023
Due Date
21-Dec-2023
Completion Date
27-Sep-2023

Relations

Buy Standard

Standard
EN 16484:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2023
Usnje - Zahteve za ugotavljanje porekla proizvodnje usnja
Leather - Requirements for the determination of the origin of leather production
Leder - Anforderungen an die Bestimmung der Herkunft von Leder
Cuir - Exigences relatives à la détermination de l'origine de la production du cuir
Ta slovenski standard je istoveten z: EN 16484:2023
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 16484
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN 16484:2015
English Version
Leather - Requirements for the determination of the origin
of leather production
Cuir - Exigences relatives à la détermination de Leder - Anforderungen an die Bestimmung der
l'origine de la production du cuir Herkunft von Leder
This European Standard was approved by CEN on 7 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16484:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements for the determination of the origin of the leather production . 6
4.1 General. 6
4.2 Tanned leather (e.g. wet blue, wet white, vegetable tanned leather) . 6
4.3 Crust (dyed or not) . 7
4.4 Finished leathers. 7
5 Records to verify the country of origin . 7
Annex A (informative) Items to be provided to determine the origin of the leather
production . 8
A.1 General. 8
A.2 Product identification . 8
A.3 Origin of the product . 8
A.4 Sales and commercial documentation . 8
A.5 Marking and labelling . 8
Bibliography . 10

European foreword
This document (EN 16484:2023) has been prepared by Technical Committee CEN/TC 289 “Leather”,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2024, and conflicting national standards shall
be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 16484:2015.
The main changes compared to the previous edition are listed below:
— Alignment of the following terms and definitions with EN 15987:2022:
— 3.1 “Leather”;
— 3.4 “Crust”.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Introduction
This document has been prepared for defining the conditions for determining the origin of the leather
production in conformity with the international Non-Preferential Rules of Origin and for fulfilling,
where applicable, the requirements for supplying the declaration of the country of origin of the leather
production.
When the origin of the leather production is declared, it is essential to make certain that the statement
is accurate. Therefore, it needs to relate to objective and verifiable requirements.
This document applies to leather only. Leather articles, such as leather bags, leather goods, leather
accessories, leather footwear, leather clothes or leather clothes accessories, leather upholstered
furniture, etc. are subject to their own respective rules of origin. It is not possible to determine
implicitly the origin of leather used (partially or totally) from the declared origin of leather articles.
Conversely, the origin of the leather used does not automatically confer the origin to the leather article.
1 Scope
This document defines the requirements that are necessary to confer the origin of leather production
based on the principle of the last substantial transformation according to Non-Preferential Rules of
Origin.
This document is applicable to leather only and it is applicable also to leather with hair. Furs are
excluded.
The country of origin of raw hides and skins isn’t relevant for the application of this document.
2 Normative r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.