EN 13601:2013

Copper and copper alloys - Copper rod, bar and wire for general electrical purposes

This European Standard specifies the composition, property requirements including electrical properties, and tolerances on dimensions and form for copper rod, bar and wire for general electrical purposes. Cross sections and size ranges are:
-   round, square and hexagonal rod with diameters or widths across flats from 2 mm up to and including 160 mm;
-   bar with thicknesses from 2 mm up to and including 40 mm and widths from 3 mm up to and including 200 mm;
-   round, square, hexagonal and rectangular wire with diameters or widths across flats from 2 mm up to and including 25 mm, as well as thicknesses from 0,5 mm up to and including 12 mm with widths from 1 mm up to and including 200 mm.
The sampling procedures and test methods for verification of conformity to the requirements of this standard are also specified.
NOTE   Drawn, round copper wire - plain or tinned, single or multiline - for the manufacture of electrical conductors is specified in EN 13602.

Kupfer und Kupferlegierungen - Stangen und Drähte aus Kupfer für die allgemeine Anwendung in der Elektrotechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften einschließlich elektrische Eigenschaften, Grenzabmaße und Formtoleranzen für Stangen und Drähte aus Kupfer für die Elektrotechnik fest. Die Querschnitte und Maßbereiche sind:
-   runde, quadratische und sechseckige Stangen mit Durchmessern oder Schlüsselweiten von 2 mm bis 160 mm;
-   rechteckige Stangen mit Dicken von 2 mm bis 40 mm und Breiten von 3 mm bis 200 mm;
-   runde, quadratische, sechseckige und rechteckige Drähte mit Durchmessern oder Schlüsselweiten von 2 mm bis 25 mm und für Dicken von 0,5 mm bis 12 mm bei Breiten von 1 mm bis 200 mm.
Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen der Norm sind ebenfalls festgelegt.
ANMERKUNG   Gezogener Runddraht aus Kupfer — blank oder verzinnt, einzeln oder mehrfach — für die Herstellung von elektrischen Leitern, ist in EN 13602 festgelegt.

Cuivre et alliages de cuivre - Barres et fils en cuivre pour usages électriques généraux

Baker in bakrove zlitine - Drogovi, palice in žice za splošno uporabo v elektrotehniki

Ta evropski standard določa sestavo, zahteve glede značilnosti, vključno z električnimi lastnostmi, ter odstopanja glede dimenzij in oblike za drogove, palice in žice za splošno uporabo v elektrotehniki. Preseki in velikosti so:
- okrogli, kvadratni in šestrobi drogovi s premerom ali širino zeva ključa od 2 mm do vključno 160 mm;
- palice z debelino od 2 mm do vključno 40 mm in širino od 3 mm do vključno 200 mm;
- okrogle, kvadratne, šestrobe in pravokotne žice s premerom ali širino zeva ključa od 2 mm do vključno 25 mm ter debelino od 0,5 mm do vključno 12 mm s širino od 1 mm do vključno 200 mm.
Določeni so tudi postopki vzorčenja in preskusne metode za preverjanje skladnosti z zahtevami tega evropskega standarda.
OPOMBA Vlečena okrogla bakrova žica — navadna ali pokositrena, enojna ali iz več žic — za izdelavo električnih prevodnikov je navedena v EN 13602.

General Information

• Status: Withdrawn
• Publication Date: 18-Jun-2013
• Withdrawal Date: 18-May-2021
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-May-2021
• Ref Project: SIST EN 13601:2013 - Copper and copper alloys - Copper rod, bar and wire for general electrical purposes

Relations

• Replaces: EN 13601:2002 - Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
• Effective Date: 26-Jun-2013
• Replaced By: EN 13601:2021 - Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
• Effective Date: 02-Aug-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Drogovi, palice in žice za splošno uporabo v elektrotehnikiCopper and copper alloys - Copper rod, bar and wire for general electrical purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13601:2013SIST EN 13601:2013en,de01-september-2013SIST EN 13601:2013SLOVENSKI
STANDARDSIST EN 13601:20041DGRPHãþD



SIST EN 13601:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13601
June 2013 ICS 77.150.30 Supersedes EN 13601:2002English Version
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
Cuivre et alliages de cuivre - Barres et fils en cuivre pour usages électriques généraux
Kupfer und Kupferlegierungen - Stangen und Drähte aus Kupfer für die allgemeine Anwendung in der ElektrotechnikThis European Standard was approved by CEN on 25 April 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13601:2013: ESIST EN 13601:2013



EN 13601:2013 (E) 2 Contents Page Foreword .4 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Designations .7 4.1 Material .7 4.2 Material condition .8 4.3 Product .8 5 Ordering information .9 6 Requirements . 11 6.1 Composition . 11 6.2 Mechanical properties . 11 6.3 Bending characteristics . 11 6.4 Electrical properties . 11 6.5 Freedom from hydrogen embrittlement . 11 6.6 Dimensions and tolerances . 11 6.7 Form tolerances . 13 6.8 Wire in coi
...