Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)

ISO 13626:2003 specifies requirements and gives recommendations for suitable steel structures for drilling and well-servicing operations in the petroleum industry, provides a uniform method of rating the structures, and provides two product specification levels.
ISO 13626:2003 is applicable to all new designs of all standard steel derricks, special steel derricks, portable masts and substructures.
Annex A provides a number of standard supplementary requirements which apply only if specified by the purchaser.

Erdöl- und Erdgasindustrie - Bohr- und Förderanlagen - Bohrungen und Bohrloch-Aufbauten (ISO 13626:2003)

Industries du pétrole et du gaz naturel - Equipement de forage et de production - Structures de forage et d'entretien des puits (ISO 13626:2003)

Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)

General Information

Status
Published
Publication Date
26-Oct-2004
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
27-Oct-2004
Completion Date
27-Oct-2004

Buy Standard

Standard
EN ISO 13626:2005
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 13626:2005
01-marec-2005

Petroleum and natural gas industries - Drilling and production equipment - Drilling

and well-servicing structures (ISO 13626:2003)

Petroleum and natural gas industries - Drilling and production equipment - Drilling and

well-servicing structures (ISO 13626:2003)
Erdöl- und Erdgasindustrie - Bohr- und Förderanlagen - Bohrungen und Bohrloch-
Aufbauten (ISO 13626:2003)

Industries du pétrole et du gaz naturel - Equipement de forage et de production -

Structures de forage et d'entretien des puits (ISO 13626:2003)
Ta slovenski standard je istoveten z: EN ISO 13626:2004
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 13626:2005 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13626:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 13626:2005
EUROPEAN STANDARD
EN ISO 13626
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 75.180.10
English version
Petroleum and natural gas industries - Drilling and production
equipment - Drilling and well-servicing structures (ISO
13626:2003)

Industries du pétrole et du gaz naturel - Equipement de Erdöl- und Erdgasindustrie - Bohr- und Dörderanlagen -

forage et de production - Structures de forage et d'entretien Anforderungen an Bohrungen und Bohrloch-Aufbauten

des puits (ISO 13626:2003) (ISO 13626:2003)
This European Standard was approved by CEN on 30 September 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13626:2004: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13626:2005
EN ISO 13626:2004 (E)
Foreword

The text of ISO 13626:2003 has been prepared by Technical Committee ISO/TC 67 "Materials,

equipment and offshore structures for petroleum and natural gas industries" of the International

Organization for Standardization (ISO) and has been taken over as EN ISO 13626:2004 by

Technical Committee CEN/TC 12 "Materials, equipment and offshore structures for petroleum

and natural gas industries" the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of

an identical text or by endorsement, at the latest by April 2005, and conflicting national

standards shall be withdrawn at the latest by April 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice

The text of ISO 13626:2003 has been approved by CEN as EN ISO 13626:2004 without any

modifications.

NOTE Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------
SIST EN ISO 13626:2005
EN ISO 13626:2004 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications

This European Standard incorporates by dated or undated reference, provisions from other

publications. These normative references are cited at the appropriate places in the text and the

publications are listed hereafter. For dated references, subsequent amendments to or revisions of

any of these publications apply to this European Standard only when incorporated in it by

amendment or revision. For undated references the latest edition of the publication referred to

applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated

by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 13535 2000 Petroleum and natural gas EN ISO 13535 2000
industries - Drilling and production
equipment - Hoisting equipment
---------------------- Page: 5 ----------------------
SIST EN ISO 13626:2005
---------------------- Page: 6 ----------------------
SIST EN ISO 13626:2005
INTERNATIONAL ISO
STANDARD 13626
First edition
2003-11-01
Petroleum and natural gas industries —
Drilling and production equipment —
Drilling and well-servicing structures
Industries du pétrole et du gaz naturel — Équipement de forage et de
production — Structures de forage et d'entretien des puits
Reference number
ISO 13626:2003(E)
ISO 2003
---------------------- Page: 7 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2003

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
Contents Page

Foreword............................................................................................................................................................. v

Introduction ....................................................................................................................................................... vi

1 Scope...................................................................................................................................................... 1

2 Normative references ........................................................................................................................... 1

3 Terms and definitions........................................................................................................................... 2

4 Product specification levels................................................................................................................. 4

5 Marking and information ...................................................................................................................... 4

5.1 Nameplate .............................................................................................................................................. 4

5.2 Derrick and mast nameplate information ........................................................................................... 4

5.3 Substructure nameplate information .................................................................................................. 5

5.4 Crown block assembly nameplate information (required only for crown block assemblies

for use with derricks)............................................................................................................................ 6

6 Standard ratings.................................................................................................................................... 6

6.1 General................................................................................................................................................... 6

6.2 Derrick — Stationary base ................................................................................................................... 6

6.3 Mast with guy lines ............................................................................................................................... 6

6.4 Mast without guy lines.......................................................................................................................... 7

6.5 Derrick and mast under dynamic conditions..................................................................................... 7

6.6 Substructure.......................................................................................................................................... 7

6.7 Substructure under dynamic conditions............................................................................................ 7

6.8 Crown block assembly ......................................................................................................................... 8

7 Design loading ...................................................................................................................................... 8

7.1 General................................................................................................................................................... 8

7.2 Derrick (stationary base)...................................................................................................................... 8

7.3 Mast with guy lines ............................................................................................................................... 9

7.4 Mast without guy lines........................................................................................................................ 10

7.5 Derrick and mast under dynamic conditions................................................................................... 10

7.6 Substructure........................................................................................................................................ 11

7.7 Substructure under dynamic conditions.......................................................................................... 11

7.8 Guide tracks and dollies..................................................................................................................... 11

7.9 Crown block assemblies .................................................................................................................... 11

8 Design specification ........................................................................................................................... 11

8.1 Allowable stresses.............................................................................................................................. 11

8.2 Wind...................................................................................................................................................... 12

8.3 Dynamic loading (induced by floating hull motion) ........................................................................ 15

8.4 Earthquake........................................................................................................................................... 16

8.5 Design verification .............................................................................................................................. 16

9 Materials............................................................................................................................................... 16

9.1 General................................................................................................................................................. 16

9.2 Written specifications......................................................................................................................... 17

9.3 Mechanical properties ........................................................................................................................ 17

9.4 Material qualification .......................................................................................................................... 17

9.5 Material manufacture .......................................................................................................................... 17

9.6 Bolts ..................................................................................................................................................... 17

9.7 Wire rope.............................................................................................................................................. 17

10 Welding requirements ........................................................................................................................ 18

10.1 General................................................................................................................................................. 18

© ISO 2003 — All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)

10.2 Welding qualifications ........................................................................................................................18

10.3 Written documentation .......................................................................................................................18

10.4 Control of consumables .....................................................................................................................18

10.5 Weld properties ...................................................................................................................................18

10.6 Post-weld heat treatment....................................................................................................................18

10.7 Quality control requirements .............................................................................................................18

10.8 Specific requirement — repair welds ................................................................................................19

11 Quality control .....................................................................................................................................19

11.1 General .................................................................................................................................................19

11.2 Quality control personnel qualifications ..........................................................................................19

11.3 Measuring and test equipment ..........................................................................................................19

11.4 Non-destructive examination.............................................................................................................20

11.5 Dimensional verification.....................................................................................................................21

11.6 Workmanship and finishing ...............................................................................................................21

11.7 Purchaser's inspection and rejection ...............................................................................................21

11.8 Testing..................................................................................................................................................22

11.9 Traceability...........................................................................................................................................22

12 Documentation ....................................................................................................................................23

12.1 General .................................................................................................................................................23

12.2 Documentation to be kept by the manufacturer ..............................................................................23

12.3 Documentation to be delivered with equipment ..............................................................................24

Annex A (normative) Supplementary requirements......................................................................................25

Annex B (normative) Standard derricks.........................................................................................................27

Bibliography......................................................................................................................................................31

iv © ISO 2003 — All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 13626 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures

for petroleum, petrochemical and natural gas industries, Subcommittee SC 4, Drilling and production

equipment.
© ISO 2003 — All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
Introduction
This International Standard is based on API Spec 4F, second edition, June 1995.
vi © ISO 2003 — All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 13626:2005
INTERNATIONAL STANDARD ISO 13626:2003(E)
Petroleum and natural gas industries — Drilling and production
equipment — Drilling and well-servicing structures
1 Scope

This International Standard specifies requirements and gives recommendations for suitable steel structures for

drilling and well-servicing operations in the petroleum industry, provides a uniform method of rating the

structures, and provides two product specification levels.

This International Standard is applicable to all new designs of all standard steel derricks, special steel derricks,

portable masts and substructures.

Annex A provides a number of standard supplementary requirements which apply only if specified by the

purchaser.
2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.
ISO 9712, Non-destructive testing — Qualification and certification of personnel

ISO 13535, Petroleum and natural gas industries — Drilling and production equipment — Hoisting equipment

ISO 10425, Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms

of acceptance

AISC 335, 1989, Specification for structural steel buildings, allowable stress design and plastic design

API RP 2A-WSD, Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms —

Working Stress Design
API Spec 8A, Specification for Drilling and Production Hoisting Equipment

API RP 9B, Recommended Practice on Application, Care and Use of Wire Rope for Oilfield Service

ASTM A 370, Standard Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM A 578/A 578M, Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad

Steel Plates for Special Applications
AWS D1.1/D1.1M:2002, Structural Welding Code — Steel

1) American Institute of Steel Construction, 1 East Wacker Drive, Suite 3100, Chicago, Illinois 60601.

2) American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005-4070.

3) American Society for Testing and Materials, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, Pennsylvannia 19428-2959.

4) American Welding Society, Incorporated, 550 Northwest LeJeune Road, Box 351040, Miami, Florida 33135.

© ISO 2003 — All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
angle of roll
angle of pitch
angle of movement to one side from vertical
3.2
critical component

component which is necessary to maintain stability of a structure and which resides within the primary load

paths of the structure when the structure is loaded under the design loadings of Clause 7

3.3
critical weld
weld which joins critical components
3.4
crown block assembly
stationary sheave or block assembly installed at the top of a derrick or mast
3.5
date of manufacture

date chosen by the manufacturer occurring between the initiation of manufacture and the delivery to the

purchaser
3.6
derrick

semipermanent structure, of square or rectangular cross-section, having members that are latticed or trussed

on all four sides

NOTE 1 This unit is assembled in the vertical or operation position, as it includes no erection mechanism.

NOTE 2 It may or may not be guyed.
3.7
design load

force or combination of forces which a structure is designed to withstand without exceeding the allowable

stress in any member
3.8
dynamic loading
loading imposed upon a structure as a result of motion
3.9
erection load

load produced in the mast and its supporting structure during its raising and lowering, or in the substructure

during its raising and lowering
3.10
guide track and dollies

equipment used to hold the travelling equipment in correct position relative to the derrick during various

operations

NOTE A retractable dolly is used move the travelling equipment horizontally between the drilling position and the

retracted position.
2 © ISO 2003 — All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
3.11
guy line

wire rope with one end attached to the mast assembly and the other end attached to a suitable anchor to

provide structural and/or lateral support for a mast under design loading conditions

3.12
guying pattern

plan view showing the manufacturer's recommended locations for guy lines and their distance out to the

anchors with respect to the centreline of the well
3.13
height of derrick and mast without guy lines

minimum vertical distance from the top of the working floor to the bottom of the crown block support beams

3.14
height of mast with guy line

minimum vertical distance from the ground to the bottom of the crown block support beams

3.15
impact loading
loading resulting from near-instantaneous changes of forces
3.16
mast

structural tower composed of one or more sections assembled in a horizontal position near the ground and

then raised to the operating position

NOTE If the unit contains two or more sections, it may be telescoped or unfolded during the erection procedure.

3.17
mast set-up distance

distance from the centreline of the well to a designated point on the mast structure defined by a manufacturer

to assist in the set-up of the rig
3.18
maximum rated static hook load

load composed of the weight of the travelling equipment and a static load applied to the travelling equipment

NOTE It is the largest load that can be applied to the structure within the guidelines imposed by this International

Standard with a specified number of lines strung to the travelling block and in the absence of pipe setback, sucker rod or

wind loading. A designated location of the deadline anchor and drawworks is assumed.

3.19
maximum rated wind velocity

largest wind velocity the derrick or mast assembly is designed to resist for a specified design loading

NOTE Maximum rated wind velocity is specified at 10 m above the ground or water surface.

3.20
nominal wire rope assembly strength

nominal strength of the wire rope, multiplied by the efficiency of the end attachment in accordance with

API RP 9B
3.21
period
ττττ
〈of roll, pitch or heave〉 time required for a complete cycle
© ISO 2003 — All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
3.22
pipe lean
angle between the vertical and a typical stand of pipe in the setback
3.23
product specification level

level of material and process controls placed upon the primary load-carrying components of the covered

equipment
3.24
racking platform

platform located at a distance above the working floor for laterally supporting the upper end of racked pipe

3.25
rated static rotary load
maximum weight which can be supported by the rotary-table support beams
3.26
rated setback load

maximum weight of tubular goods which can be supported by the substructure in the setback area

3.27
rod board
rod hanger
platform located at a distance above the working floor for supporting rods
3.28
substructure

any structure through which hook load, rotary load and/or setback load are transmitted

4 Product specification levels

This International Standard establishes requirements for two product specification levels (PSL) for drilling and

well-servicing structures which define two levels of technical and quality requirements. These requirements

reflect practices currently being implemented by a broad spectrum of the manufacturing industry. PSL 1

includes all the requirements of this International Standard unless specifically identified as PSL 2. PSL 2

includes all the requirements of PSL 1 plus additional requirements.
5 Marking and information
5.1 Nameplate

Drilling and well-servicing structures manufactured in accordance with this International Standard shall be

identified by a nameplate bearing at least the information specified in 5.2 to 5.4, including the units of

measurement where applicable. Markings shall be either raised or stamped. The nameplate shall be securely

affixed to the structure in a conspicuous place.
5.2 Derrick and mast nameplate information
The following information shall be provided:
a) manufacturer's name;
b) manufacturer's address;
c) date of manufacture, including month and year;
4 © ISO 2003 — All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 13626:2005
ISO 13626:2003(E)
d) serial number;
e) height;

f) maximum rated static hook load with guy lines, if applicable, for stated number of lines to travelling block;

g) maximum rated wind velocity with guy lines, if applicable, with rated capacity of pipe racked;

h) specification and edition of the specification under which the structure was designed and manufactured;

EXAMPLE ISO 13626:2003
i) manufacturer's guying diagram, if applicable;
j) the following text:

CAUTION — Acceleration, impact, setback and wind loads reduce the maximum rated static hook

load capacity.

k) manufacturer's load distribution diagram (may be placed in mast instructions);

l) graph plotting maximum allowable static hook load versus wind velocity as defined in 6.2

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.