EN ISO 13626:2004

Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)

ISO 13626:2003 specifies requirements and gives recommendations for suitable steel structures for drilling and well-servicing operations in the petroleum industry, provides a uniform method of rating the structures, and provides two product specification levels.
ISO 13626:2003 is applicable to all new designs of all standard steel derricks, special steel derricks, portable masts and substructures.
Annex A provides a number of standard supplementary requirements which apply only if specified by the purchaser.

Erdöl- und Erdgasindustrie - Bohr- und Förderanlagen - Bohrungen und Bohrloch-Aufbauten (ISO 13626:2003)

Industries du pétrole et du gaz naturel - Equipement de forage et de production - Structures de forage et d'entretien des puits (ISO 13626:2003)

Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)

General Information

• Status: Published
• Publication Date: 26-Oct-2004
• Withdrawal Date: 29-Apr-2005
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Oct-2004
• Completion Date: 27-Oct-2004
• Ref Project: SIST EN ISO 13626:2005 - Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2005
Petroleum and natural gas industries - Drilling and production equipment - Drilling
and well-servicing structures (ISO 13626:2003)
Petroleum and natural gas industries - Drilling and production equipment - Drilling and
well-servicing structures (ISO 13626:2003)
Erdöl- und Erdgasindustrie - Bohr- und Förderanlagen - Bohrungen und Bohrloch-
Aufbauten (ISO 13626:2003)
Industries du pétrole et du gaz naturel - Equipement de forage et de production -
Structures de forage et d'entretien des puits (ISO 13626:2003)
Ta slovenski standard je istoveten z: EN ISO 13626:2004
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13626
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 75.180.10
English version
Petroleum and natural gas industries - Drilling and production
equipment - Drilling and well-servicing structures (ISO
13626:2003)
Industries du pétrole et du gaz naturel - Equipement de Erdöl- und Erdgasindustrie - Bohr- und Dörderanlagen -
forage et de production - Structures de forage et d'entretien Anforderungen an Bohrungen und Bohrloch-Aufbauten
des puits (ISO 13626:2003) (ISO 13626:2003)
This European Standard was approved by CEN on 30 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13626:2004: E
worldwide for CEN national Members.

Foreword
The text of ISO 13626:2003 has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum and natural gas industries" of the International
Organization for Standardization (ISO) and has been taken over as EN ISO 13626:2004 by
Technical Committee CEN/TC 12 "Materials, equipment and offshore structures for petroleum
and natural gas industries" the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2005, and conflicting national
standards shall be withdrawn at the latest by April 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13626:2003 has been approved by CEN as EN ISO 13626:2004 without any
modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).

Annex ZA
(normative)
Normative references to international publications
with their relevant European publications

This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.

Publication Year Title EN Year

ISO 13535 2000 Petroleum and natural gas EN ISO 13535 2000
industries - Drilling and production
equipment - Hoisting equipment

INTERNATIONAL ISO
STANDARD 13626
First edition
2003-11-01
Petroleum and natural gas industries —
Drilling and production equipment —
Drilling and well-servicing structures
Industries du pétrole et du gaz naturel — Équipement de forage et de
production — Structures de forage et d'entretien des puits

Reference number
ISO 13626:2003(E)
©
ISO 2003
ISO 13626:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved

ISO 13626:2003(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 Product specification levels. 4
5 Marking and information . 4
5.1 Nameplate . 4
5.2 Derrick and mast nameplate information . 4
5.3 Substructure nameplate information . 5
5.4 Crown block assembly nameplate information (required only for crown block assemblies
for use with derricks). 6
6 Standard ratings. 6
6.1 General. 6
6.2 Derrick — Stationary base . 6
6.3 Mast with guy lines . 6
6.4 Mast without guy lines. 7
6.5 Derrick and mast under dynamic conditions. 7
6.6 Substructure. 7
6.7 Substructure under dynamic conditions. 7
6.8 Crown block assembly . 8
7 Design loading . 8
7.1 General. 8
7.2 Derrick (stationary base). 8
7.3 Mast with guy lines . 9
7.4 Mast without guy lines. 10
7.5 Derrick and mast under dynamic conditions. 10
7.6 Substructure. 11
7.7 Substructure under dynamic conditions. 11
7.8 Guide tracks and dollies. 11
7.9 Crown block assemblies . 11
8 Design specification . 11
8.1 Allowable stresses. 11
8.2 Wind. 12
8.3 Dynamic loading (induced by floating hull motion) . 15
8.4 Earthquake. 16
8.5 Design verification . 16
9 Materials. 16
9.1 General. 16
9.2 Written specifications. 17
9.3 Mechanical properties . 17
9.4 Material qualification . 17
9.5 Material manufacture . 17
9.6 Bolts . 17
9.7 Wire rope. 17
10 Welding requirements . 18
10.1 General. 18
ISO 13626:2003(E)
10.2 Welding qualifications .
...