EN 13126-1:2011

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware

This European Standard specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware.
This European Standard is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window.
Table 1  Window opening-types
Window opening-type   Description
Description refers to EN 12519   Number of Figure in Annex B
A   Side-hung window inward opening
single (and double) side-hung casement, opening inwards   B.1
B   Side-hung window outward opening
single (and double) side-hung casement, opening outwards   B.1
C   Bottom-hung window inward opening and outward opening
bottom-hung casement, opening inwards or outwards   B.2
D   Top-hung window inward opening and outward opening
top-hung casement, opening inwards or outwards   B.2
E   Tilt&Turn, Tilt-First
tilt and turn windows   B.3
F   Horizontal pivot window
horizontal pivot casement, centre or off-centre   B.4
G   Vertical pivot window
vertical pivot casement, centre or off-centre   B.4
H   Projecting top-hung inward and outward opening window
sliding projecting, top-hung casement, opening inwards or outwards   B.5
J   Projecting bottom-hung inward and outward opening window
this type is not separately described in EN 12519   B.5
K   Projecting reversible top-hung window
this type is not separately described in EN 12519   B.6
L   Projecting reversible side-hung window
sliding projecting, side-hung casement, open out   B.7
M   Vertical sliding sash
vertical sliding sash   B.8
N   Horizontal sliding sash
horizontal sliding sash   B.9
P   Lifting sliding sash
lifting sliding sash   B.10
Q   Folding window (centre pivot)
this type is not separately described in EN 12519   B.11
R   Folding outward opening window (corner pivot)
sliding folding window   B.12
S   Folding inward opening window (corner pivot)
sliding folding window    B.12
T   Tilting sliding sash
double tilting sliding sash   B.13
U   Top-hung inward opening window multi-light
this type is not separately described in EN 12519   B.14
V   Bottom-hung inward opening window multi-light
this type is not separately described in EN 12519   B.14
W   Horizontal balanced window
this type is not separately described in EN 12519   B.15
This European Standard does not apply to the following:
Fusible links, hardware for lifting side-hung windows, fixing devices that are used to assemble or install a fixed window, devices that are used for the permanent fixing of a complete window into a building structure, mechanisms for the pneumatic or hydraulic remote operation of windows; also single axis hinges (other than those, which provide a pivot-function for windows) and dead bolts suitable for both door and window sashes, as covered in EN 1935 and EN 12051 respectively.
NOTE 1   If fire/smoke resistance is required, reference should be made to the respective standards mentioned in 5.5.
NOTE 2   If burglar resistance is required, reference should be made to EN 1627, EN 1628, EN 1629 and EN 1630.

Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 1: Gemeinsame Anforderungen an alle Arten von Beschlägen

Diese Europäische Norm legt Leistungsanforderungen an die Festigkeit und Dauerfunktionstüchtigkeit von Beschlägen für die Betätigung beweglicher Flügel von Fenstern und Fenstertüren einschließlich der Anforderungen und Prüfverfahren fest, die für alle Beschläge gelten.
Diese Europäische Norm gilt für Beschläge, die für die in Tabelle 1 aufgeführten Fenster und Fenstertüren geeignet sind, unabhängig von den für den Bau der Fenster verwendeten Werkstoffen.
Diese Europäische Norm gilt nicht für Folgendes:
Sicherheitsverbinder; Beschläge für Hebedrehflügelfenster, Befestigungs¬vorrich¬tungen, die für den Zusammenbau oder den Einbau eines feststehenden Fensters verwendet werden; Vorrichtungen für die dauerhafte Befestigung von kompletten Fenstern am Bauwerk; Mechanismen für die pneumatische oder hydraulische Fernbetätigung von Fenstern; einachsige Bänder (abweichend von denen, die bei Fenstern die Funktion eines Lagerzapfens übernehmen) und Riegel nach EN 1935 bzw. EN 12051, die sowohl für Türblätter als auch für Fensterflügel geeignet sind.
ANMERKUNG 1   Falls Feuer /Rauchbeständigkeit erforderlich ist, sollte auf die entsprechenden Normen nach 5.5 Bezug genommen werden.
ANMERKUNG 2   Falls Einbruchhemmung erforderlich ist, sollte auf EN 1627, EN 1628, EN 1629 und EN 1630 Bezug genommen werden.

Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 1: Exigences communes à tous les types de ferrures

La présente Norme européenne spécifie les exigences de performance relatives à la résistance et à
l'endurance des ferrures équipant les ouvrants de fenêtres et portes-fenêtres, en se limitant aux exigences et
méthodes d'essai communes à toutes les ferrures.
La présente Norme européenne s'applique aux ferrures utilisables sur les fenêtres et portes-fenêtres du
Tableau 1, quel que soit le matériau utilisé dans la construction de la fenêtre.

Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne metode - 1. del: Zahteve, skupne vsem vrstam okovja

Ta evropski standard določa delovne zahteve za trdnost in trajnost okovja za delovanje premičnih okvirjev oken in zastekljenih vrat, vključno z zahtevami in preskusnimi metodami, ki so skupne vsem okovjem.

General Information

• Status: Withdrawn
• Publication Date: 22-Nov-2011
• Withdrawal Date: 25-Jan-2022
• ICS: 91.190 - Building accessories
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 4 - Building hardware
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Jan-2022
• Ref Project: SIST EN 13126-1:2012 - Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware

Relations

• Replaces: EN 13126-1:2006 - Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware
• Effective Date: 27-Mar-2010
• Replaced By: EN 13126-1:2022 - Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne metode - 1. del: Zahteve, skupne vsem vrstam okovjaBaubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 1: Gemeinsame Anforderungen an alle Arten von BeschlägenQuincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 1: Exigences communes à tous les types de ferruresBuilding hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 13126-1:2011SIST EN 13126-1:2012en,fr,de01-januar-2012SIST EN 13126-1:2012SLOVENSKI
STANDARDSIST EN 13126-1:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13126-1
November 2011 ICS 91.190 Supersedes EN 13126-1:2006English Version
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 1: Exigences communes à tous les types de ferrures
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 1: Gemeinsame Anforderungen an alle Arten von Beschlägen This European Standard was approved by CEN on 15 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13126-1:2011: ESIST EN 13126-1:2012

List of parts and titles and their reference to the relevant window types . 17Annex B (informative)
Window types . 18Bibliography . 27 SIST EN 13126-1:2012
...