CEN/TS 16599:2014

Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions

This Technical Specification prescribes the conditions for irradiating photocatalytic surfaces in order to perform photocatalytic efficiency tests. In addition, the measurement and documentation of these irradiation conditions with respect to the spectral distribution, irradiance and homogeneity are given.

Photokatalyse - Bestrahlungsbedingungen zum Prüfen photokatalytischer Eigenschaften von halbleitenden Werkstoffen und die Messung dieser Bedingungen

Diese Technische Spezifikation legt die Bestrahlungsbedingungen für photokatalytische Oberflächen fest, um photokatalytische Wirksamkeitsprüfungen durchzuführen. Zusätzlich sind die Messung und Dokumentation dieser Bestrahlungsbedingungen hinsichtlich der Spektralverteilung, Bestrahlungsstärke und Homogenität festgelegt.

Photocatalyse - Détermination des conditions d’irradiation pour tester les propriétés photocatalytiques de matériaux semi-conducteurs

La présente Spécification technique prescrit les conditions d’irradiation des surfaces photocatalytiques dans le but de réaliser des essais d’efficacité photocatalytique. La détermination et la documentation de ces conditions d’irradiation, telles que la répartition spectrale, l’éclairement énergétique et l’homogénéité, sont également indiquées.

Fotokataliza - Obsevalni pogoji za preskušanje fotokatalitičnih lastnosti polprevodnih snovi in meritve teh pogojev

Standard CEN/TR 16599 predpisuje pogoje obsevanja fotokatalitičnih površin z namenom izvajanja fotokatalitičnih preskusov učinkovitosti. Poleg tega so v standardu podane meritve in dokumentacija pogojev obsevanja glede na spektralno porazdelitev, obsevanje in homogenost.

General Information

• Status: Published
• Publication Date: 25-Mar-2014
• ICS: 25.220.20 - Surface treatment
• Technical Committee: CEN/TC 386 - Photocatalysis
• Drafting Committee: CEN/TC 386/WG 6 - Light source
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 29-Mar-2018
• Ref Project: SIST-TS CEN/TS 16599:2014 - Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16599:2014
01-junij-2014
)RWRNDWDOL]D2EVHYDOQLSRJRML]DSUHVNXãDQMHIRWRNDWDOLWLþQLKODVWQRVWL
SROSUHYRGQLKVQRYLLQPHULWYHWHKSRJRMHY
Photocatalysis - Irradiation conditions for testing photocatalytic properties of
semiconducting materials and the measurement of these conditions
Photokatalyse - Bestrahlungsbedingungen zum Prüfen photokatalytischer Eigenschaften
von halbleitenden Werkstoffen und die Messung dieser Bedingungen
Photocatalyse - Détermination des conditions d’irradiation pour tester les propriétés
photocatalytiques de matériaux semi-conducteurs
Ta slovenski standard je istoveten z: CEN/TS 16599:2014
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST-TS CEN/TS 16599:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16599:2014

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16599:2014

TECHNICAL SPECIFICATION
CEN/TS 16599

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
March 2014
ICS 25.220.20
English Version
Photocatalysis - Irradiation conditions for testing photocatalytic
properties of semiconducting materials and the measurement of
these conditions
Photocatalyse - Détermination des conditions d'irradiation Photokatalyse - Bestrahlungsbedingungen zum Prüfen
pour tester les propriétés photocatalytiques de matériaux photokatalytischer Eigenschaften von halbleitenden
semi-conducteurs Werkstoffen und die Messung dieser Bedingungen
This Technical Specification (CEN/TS) was approved by CEN on 14 October 2013 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16599:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16599:2014
CEN/TS 16599:2014 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Symbols and abbreviations .5
3 Specification of spectral areas and irradiance values .5
4 Lamp types and filters .6
4.1 Examples of different lamp types .6
4.1.1 Xenon lamps .6
4.1.2 Halogen lamps .7
4.1.3 Fluorescence lamps .7
4.1.4 Mercury vapour lamps .7
4.1.5 Light emitting diodes (LED) .
...