Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts

This document specifies criteria for sampling and gives guidance on the sampling from melts in order to verify if the chemical composition of the product fabricated from a metal melt is in conformance with the
NOTE   For sampling from product or laboratory samples see EN 14242 or prEN 14726.

Aluminium und Aluminiumlegierungen - Chemische Analyse - Probenahme von Metallschmelzen

Diese Europäische Norm legt die Probenamekriterien fest und gibt eine Anleitung für die Probenahme von Metallschmelzen, um zu prüfen, ob die chemische Zusammensetzung des aus einer Metallschmelze hergestellten Erzeugnisses mit der Spezifikation übereinstimmt.
ANMERKUNG   Für die Probenahme von Erzeugnissen oder Laborproben siehe prEN 14242 oder prEN 14726.

Aluminium et alliages d'aluminium - Analyse chimique - Echantillonnage du métal fondu

La présente Norme européenne spécifie les critères d'échantillonnage et fournit un guide pour l'échantillonnage des métaux fondus en vue de vérifier si la composition chimique du produit fabriqué à partir d'un métal fondu est conforme à la spécification.
NOTE   Pour l'échantillonnage des produits finis voir les exigences énoncées dans le prEN 14242 ou prEN 14726.

Aluminij in aluminijeve zlitine – Kemična analiza – Vzorčenje iz topljene kovine

General Information

Publication Date
Withdrawal Date
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date

Buy Standard

EN 14361:2005
English language
10 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Chemische Analyse - Probenahme von MetallschmelzenAluminium et alliages d'aluminium - Analyse chimique - Echantillonnage du métal fonduAluminium and aluminium alloys - Chemical analysis - Sampling from metal melts77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys77.040.30Kemijska analiza kovinChemical analysis of metalsICS:Ta slovenski standard je istoveten z:EN 14361:2004SIST EN 14361:2005en01-februar-2005SIST EN 14361:2005SLOVENSKI

SIST EN 14361:2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14361November 2004ICS 77.040.30; 77.120.10English versionAluminium and aluminium alloys - Chemical analysis - Samplingfrom metal meltsAluminium et alliages d'aluminium - Analyse chimique -Echantillonnage du métal fonduAluminium und Aluminiumlegierungen - ChemischeAnalyse - Probenahme von MetallschmelzenThis European Standard was approved by CEN on 14 October 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14361:2004: ESIST EN 14361:2005

EN 14361:2004 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Sampling from a melt.5 4.1 General.5 4.2 Sampling procedure.5 4.3 Form and size of the sampling mould and of the sample taken from liquid metal.5 4.4 Sampling plan.6 4.5 Preparation of sampling from metal melts.6 4.6 Requirements for a sound melt sample.6 4.7 Check of the sampling mould and the sampling ladle.6 Annex A (informative)
Example for sampling from metal melts.7 A.1 Principle.7 A.2 Equipment.7 A.3 Procedure.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.