EN 15715:2009
(Main)Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
This standard specifies instructions for mounting and fixing for reaction to fire testing of factory made thermal insulation products.
Wärmedämmstoffe - Einbau- und Befestigungsbedingungen für die Prüfung des Brandverhaltens - Werkmäßig hergestellte Wärmedämmstoffe
Diese Europäische Norm legt Anweisungen für Montage und Befestigung von fabrikmäßig hergestellten Dämmprodukten in der Brandverhaltensprüfung fest.
Produits isolants thermiques - Instructions de montage et de fixation pour l'essai de réaction au feu - Produits isolants thermiques manufacturés
La présente Norme européenne spécifie des instructions de montage et de fixation pour l’essai de réaction au feu de produits isolants thermiques manufacturés.
Toplotnoizolacijski proizvodi - Navodila za vgradnjo in pritrjevanje za preskuse odziva na ogenj - Tovarniško izdelani proizvodi
Ta evropski standard določa navodila za vgradnjo in pritrjevanje za preskuse odziva na ogenj tovarniško izdelanih termoizolacijskih proizvodov.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi - Navodila za vgradnjo in pritrjevanje za preskuse odziva na ogenj - Tovarniško izdelani proizvodiWärmedämmstoffe - Einbau- und Befestigungsbedingungen für die Prüfung des Brandverhaltens - Werkmäßig hergestellte WärmedämmstoffeProduits isolants thermiques - Instructions de montage et de fixations pour l'essai de réaction au feu - Produits isolants thermiques manufacturésThermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products91.100.60Thermal and sound insulating materials13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 15715:2009SIST EN 15715:2010en,fr,de01-april-2010SIST EN 15715:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15715
November 2009 ICS 91.100.60 English Version
Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
Produits isolants thermiques - Instructions de montage et de fixations pour l'essai de réaction au feu - Produits isolants thermiques manufacturés
Wärmedämmstoffe - Einbau- und Befestigungsbedingungen für die Prüfung des Brandverhaltens - Werkmäßig hergestellte Wärmedämmstoffe This European Standard was approved by CEN on 29 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15715:2009: ESIST EN 15715:2010
Tables Table 1 — Product parameters . 11 SIST EN 15715:2010
Table A.1 — Product parameters for MW – flat products, when tested as placed on the market or in standard test configuration of assemblies . 26 Table A.2 — Installation parameters for MW – flat products, as placed on the market . 29 Table A.3 — Product parameters for MW – pipe insulation products, as placed on the market . 30 Table A.4 — Installation parameters for MW – pipe insulation products, as placed on the market . 31 Table A.5 — Installation parameters for MW –
flat products in standard test configuration of assemblies, simulating end-use applications . 32
Table A.6 — Product parameters for EPS – flat products,
when tested as placed on the market
or in standard test configuration of assemblies . 34 Table A.7 — Installation parameters for EPS – flat products as placed on the market . 35 Table A.8 — Product parameters for
EPS
– pipe insulation products, as placed on the market . 36 Table A.9 — Installation parameters for EPS – pipe insulation products, as placed on the market . 37 Table A.10 — Installation parameters for EPS
–
flat products in standard test configuration of assemblies, simulating end-use applications . 38
Table A.11 — Product parameters for XPS – flat products when tested as placed on the market or in standard test configuration of assemblies . 39 Table A.12— Installation parameters for XPS
–
flat products as placed on the market . 40 Table A.13 — Product parameters for XPS
– pipe insulation products, as placed on the market . 41 Table A.14 — Installation parameters for XPS – pipe insulation products, as placed on the market . 42 Table A.15 — Installation parameters for XPS
– flat products in standard test configuration of assemblies, simulating end-use applications . 43
Table A.16 — Product parameters for PUR/PIR – flat products when tested as placed on the market or in standard test configuration of assemblies. 44 Table A.17 — Installation parameters for PUR/PIR – flat products, as placed on the market . 45 Table A.18 — Product parameters for PUR/PIR – pipe insulation products, as placed on the market . 46 Table A.19 — Installation parameters for PUR/PIR - pipe insulation products, as placed on the market . 47 Table A.20 — Installation parameters for PUR/ PIR – flat products in standard test configuration of assemblies, simulating end-use applications . 48
Table A.21 — Product parameters for PF – flat products, when tested as placed on the market or in standard test configuration of assemblies . 50 Table A.22 — Installation parameters for PF – flat products, as placed on the market . 51 Table A.23 — Product parameters for PF – pipe insulation products, as placed on the market . 52 Table A.24 — Installation parameters for PF – pipe insulation products, as placed on the market. 53 Table A.25 — Installation parameters for PF
– flat products in standard test configuration of assemblies, simulating end-use applications . 54
Table A.26 — Product parameters for CG – flat products when tested as placed on the market
or in standard test configuration of assemblies . 56 Table A.27 — Installation parameters for CG – flat products, as placed on the market . 58 Table A.28 — Product parameters for CG – pipe insulation productsa, as placed on the market . 59 Table
A.29 — Installation parameters for CG- linear pipe thermal insulation . 60 Table A.30— Installation parameters for CG
— flat products, in standard test configuration of assemblies
simulating end-use applications . 61
Table A.31 — Product parameters for WW
—
flat products, when tested as placed on the market or in standard test configuration of assemblies . 63 Table A.31 (continued) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.