EN ISO 29466:2022
(Main)Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)
Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)
This document specifies the equipment and procedures for determining the thickness of full‑size products. It is applicable to thermal insulating products.
This document provides the reference method. Other methods can be used (e.g. for quality control), provided a correlation has been established with this reference method; Annex B gives some examples of such methods.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dicke (ISO 29466:2022)
Dieses Dokument legt Prüfeinrichtungen und Verfahren zur Bestimmung der Dicke von Produkten in Liefermaßen fest. Es gilt für Wärmedämmstoffe.
Dieses Dokument enthält das Referenzverfahren. Es können andere Verfahren angewendet werden (z. B. zur Qualitätskontrolle), sofern ein Bezug zu diesem Referenzverfahren hergestellt wurde; Anhang B enthält einige Beispiele für solche Verfahren.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'épaisseur (ISO 29466:2022)
Le présent document spécifie l’équipement et les modes opératoires permettant de déterminer l’épaisseur des produits en vraies dimensions. Il s’applique aux produits isolants thermiques.
Le présent document fournit la méthode de référence. D’autres méthodes peuvent être employées (par exemple, pour le contrôle de la qualité), à condition qu’une corrélation ait été établie avec la présente méthode de référence; plusieurs exemples de méthodes alternatives sont fournis à l’Annexe B.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje debeline (ISO 29466:2022)
Ta evropski standard določa opremo in postopke za ugotavljanje debeline proizvodov naravne velikosti. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2023
Nadomešča:
SIST EN 823:2013
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje debeline
(ISO 29466:2022)
Thermal insulating products for building applications - Determination of thickness (ISO
29466:2022)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dicke (ISO 29466:2022)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de
l'épaisseur (ISO 29466:2022)
Ta slovenski standard je istoveten z: EN ISO 29466:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 29466
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 823:2013
English Version
Thermal insulating products for building applications -
Determination of thickness (ISO 29466:2022)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de l'épaisseur (ISO der Dicke (ISO 29466:2022)
29466:2022)
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29466:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 29466:2022) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 823:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 29466:2022 has been approved by CEN as EN ISO 29466:2022 without any modification.
INTERNATIONAL ISO
STANDARD 29466
Second edition
2022-10
Thermal insulating products
for building applications —
Determination of thickness
Produits isolants thermiques destinés aux applications du bâtiment —
Détermination de l'épaisseur
Reference number
ISO 29466:2022(E)
ISO 29466:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 29466:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens . 2
6.1 Dimensions of test specimens . 2
6.2 Number of test specimens . 2
6.3 Conditioning of test specimens . 2
6.4 Preparation of test specimens . 3
7 Procedure .3
7.1 Test conditions . 3
7.2 Test procedure . 3
8 Calculation and expression of results . 4
9 Accuracy of measurement.4
10 Test report . 5
Annex A (normative) Preparation of test specimens for compressed products .6
Annex B (normative) Examples of other methods for the determination of thickness.7
iii
ISO 29466:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use
in the built environment, Subcommittee SC 1, Test and measurement methods, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 88, Thermal insulating
materials and products, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 29466:2008), which has been technically
revised.
The main changes are as follows:
— Clause 2, Normative references, has been added and the following numbering of clauses has been
changed accordingly;
— a reference to Annex B has been added in Clause 4;
— the conditioning and testing conditions have been modified in 6.3 and 7.1;
— some editorial corrections have been made.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
INTERNATIONAL STANDARD ISO 29466:2022(E)
Thermal insulating products for building applications —
Determination of thickness
1 Scope
This document specifies the equipment and procedures for determining the thickness of full-size
products. It is applicable to thermal insulating products.
This document provides the reference method. Other methods can be used (e.g. for quality control),
provided a correlation has been established with this reference method; Annex B gives some examples
of such methods.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
thickness
d
linear dimension measured perpendicularly to the length and width plane
4 Principle
The distance is measured between a hard, flat reference surface on which the test specimen rests and a
pressure plate resting freely on the top face of the specimen.
For products that can be penetrated or for rigid cellular foam products or rigid material, the test method
shall be carried out as specified in Annex B.
5 Apparatus
5.1 Measuring device, comprised of
a) a dial gauge, with a maximum permissible error of 0,5 mm and mounted on a rigid frame fastened
to a flat rigid base plate that is at least as large as the test specimen;
b) a square pressure plate, 200 mm square, which exerts a total pressure on the test specimen of
either (50 ± 1,5) Pa or (250 ± 5) Pa (including the force exerted by the dial gauge).
If a higher accuracy is required, it is specified
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.