iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60268-5:2003

(Main)

Sound system equipment - Part 5: Loudspeakers

Sound system equipment - Part 5: Loudspeakers

Gives the characteristics to be specified and the relevant methods of measurement for loudspeakers using sinusoidal or specified noise or impulsive signals.

Elektroakustische Geräte - Teil 5: Lautsprecher

Equipements pour systèmes électroacoustiques - Part 5: Haut-parleurs

La CEI 60268-5:2003 s'applique aux haut-parleurs de systèmes électroacoustiques, traités entièrement comme des éléments passifs. Les haut-parleurs avec amplificateurs incorporés sont exclus. Elle indique les caractéristiques à spécifier et les méthodes de mesure appropriées pour les haut-parleurs, utilisant des signaux sinusoïdaux, de bruit spécifié ou impulsionnels. Cette troisième édition annule et remplace la deuxième édition parue en 1989, l'amendement 1 (1993) et l'amendement 2 (1996). Elle constitue une révision technique. Cette publication doit être lue conjointement avec la CEI 60268-1:1985 et la CEI 60268-2:1987.

Sound system equipment - Part 5: Loudspeakers (IEC 60268-5::2003)

General Information

Status
Published
Publication Date
03-Jul-2003
Withdrawal Date
31-May-2006
ICS
33.160.50 - Accessories
Technical Committee
CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
Drafting Committee
IEC/TC 100 - IEC_TC_100
Parallel Committee
IEC/TC 100 - IEC_TC_100
Current Stage
6060 - Document made available - Publishing
Start Date
04-Jul-2003
Completion Date
04-Jul-2003
Ref Project
SIST EN 60268-5:2003 - Sound system equipment -- Part 5: Loudspeakers

Relations

Replaces
EN 60268-5:1996/A2:1996 - Sound system equipment - Part 5: Loudspeakers
Effective Date
29-Jan-2023
Replaces
EN 60268-5:1996 - Sound system equipment - Part 5: Loudspeakers
Effective Date
28-Jan-2023
Amended By
EN 60268-5:2003/A1:2009 - Sound system equipment - Part 5: Loudspeakers
Effective Date
29-Jan-2023

Buy Standard

EN 60268-5:2003EN 60268-5:2003
PreviousNext
Standard
EN 60268-5:2003
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60268-5:2003
01-december-2003
1DGRPHãþD
SIST EN 60268-5:1999
SIST EN 60268-5:1999/A2:1999
Sound system equipment - Part 5: Loudspeakers (IEC 60268-5::2003)
Sound system equipment -- Part 5: Loudspeakers
Elektroakustische Geräte -- Teil 5: Lautsprecher
Equipements pour systèmes électroacoustiques -- Part 5: Haut-parleurs
Ta slovenski standard je istoveten z: EN 60268-5:2003
ICS:
33.160.50 Pribor Accessories
SIST EN 60268-5:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 2 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 3 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 4 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 5 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 6 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 7 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 8 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 9 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 10 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 11 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 12 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 13 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 14 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 15 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 16 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 17 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 18 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 19 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 20 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 21 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 22 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 23 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 24 ----------------------

SIST EN 60268-5:2003

---------------------- Page: 25 -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 63296-2:2024(Main)
Portable multimedia equipment - Determination of battery duration - Part 2: Headphones and earphones with active noise-cancelling functions
kSIST FprEN IEC 63296-2:2023

IEC 63296-2:2023 is applicable to active acoustic noise-cancelling headphones and earphones that have the function of reducing the ambient noise heard by the user by the level of the output sound from the transducer, which is generated by the ambient noise detection microphone and the noise reduction signal processing circuit. This document covers headphones and earphones to be worn over-the-ear or in-ear, all of which are referred to as "headphones" in this document. This document specifies the terms and definitions relating to battery duration of this type of headphones and the measurement and evaluation methods. The noise-detection microphones are mounted in the body, on the surface, or on an accessory of the headphones. Signal-processing circuits are analogue and digital electronic circuits. This document does not deal with equipment intended for hearing protection. It is also not applicable to music players, recorders, etc. that have a noise-cancelling function. The battery duration measurement methods can be applied to headphones having no active noise-cancelling function.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60268-23:2023(Main)
Sound system equipment - Part 23: TVs and monitors - Loudspeaker systems
SIST EN IEC 60268-23:2023

IEC 60268-23:2023 specifies acoustical measurement methods that apply to TV sets, monitors with built-in loudspeakers, and other audio devices having similar acoustical properties (e.g. flat-panel loudspeakers). The acoustical measurements are performed under free-field conditions and in-situ. This document does not assess the perception and cognitive evaluation of the reproduced sound, nor the impact of perceived sound quality.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63296-1:2021(Main)
Portable multimedia equipment - Determination of battery duration - Part 1: Powered loudspeaker equipment
SIST EN IEC 63296-1:2022

IEC 63296-1:2021 specifies the methods for measuring the battery duration at defined sound pressure levels for continuous music playback of battery-powered loudspeaker equipment. A primary battery or secondary battery can be used as a power source for the loudspeaker and its composite equipment. In the case of composite equipment, this method for the measurement of battery duration can be applied under the condition of powered loudspeaker playback only.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60268-7:2011/A1:2020(Amendment)
Sound system equipment - Part 7: Headphones and earphones
SIST EN 60268-7:2011/A1:2021
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63034:2020(Main)
Microspeakers
SIST EN IEC 63034:2021

IEC 63034:2020 specifies the characteristics of microspeakers as well as the relevant test methods on microspeakers using steady-state sinusoidal signals, sinusoidal chirp, multi-tone or noise. The main characteristics include, but are not limited to, impedance, displacement, amplitude frequency response, distortion, and power handling.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60268-4:2018(Main)
Sound system equipment - Part 4: Microphones
SIST EN IEC 60268-4:2019

NEW!IEC 60268-4:2018 is available as IEC 60268-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60268-4:2018 specifies methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also details the characteristics to be specified by the manufacturer. It applies to sound system microphones for all applications for speech and music. It does not apply to measurement microphones, but it does apply to each audio channel of microphones having more than one channel, for example for stereo or similar use. It is also applicable to flush-mounted microphones and to the analogue characteristics of microphones with digital audio output. For the purposes of this International Standard, a microphone includes all such devices as transformers, pre-amplifiers, or other elements that form an integral part of the microphone, up to the output terminals specified by the manufacturer. The major characteristics of a microphone are considered in Clauses 6 to 21. Additional characteristics are considered in Annex A and Annex C. IEC 60268-4:2018 cancels and replaces the fifth edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) subclause 19.4 on "pop" measurement replaces Annex C; b) new Annex D for noise measurements in the digital domain.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62777:2016(Main)
Quality evaluation method for the sound field of directional loudspeaker array system
SIST EN 62777:2016

IEC 62777:2016(E) determines of the performance of directional loudspeaker array systems, compares these system types, and determines their proper practical application, by listing the characteristics which are useful for their specification. It specifies uniform measurement methods for these characteristics.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62459:2011/AC:2015(Corrigendum)
Sound system equipment - Electroacoustic transducers - Measurement of suspension parts
SIST EN 62459:2011/AC:2016

IEC corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62459:2011(Main)
Sound system equipment - Electroacoustic transducers - Measurement of suspension parts
SIST EN 62459:2011

IEC 62459:2010(E) applies to the suspension parts of electroacoustic transducers (for example, loudspeakers). It defines the parameters and measurement method to determine the properties of suspension parts like spiders, surrounds, diaphragms or cones before being assembled in the transducer. The measurement results are needed for engineering design purposes and for quality control. Furthermore, this method is intended to improve the correlation of measurements between suspension-part manufacturers and loudspeaker manufacturers. The measurement methods provide parameters based on linear and nonlinear modelling of the suspension part and uses both static and dynamic techniques. It cancels and replaces IEC/PAS 62459 published in 2006. It constitutes a technical revision. The main changes are: - descriptions of the methods of measurement are adjusted to the state of the technology; - addition of Clauses 5 to 13; - integration of Annex A in the main body of the standard; - overall textual review.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62458:2011(Main)
Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters
SIST EN 62458:2011

IEC 62458:2010(E) applies to transducers such as loudspeaker drive units, loudspeaker systems, headphones, micro-speakers, shakers and other actuators using either an electro-dynamical or electro-magnetic motor coupled with a mechanical suspension. The large signal behaviour of the transducer is modelled by a lumped parameter model considering dominant nonlinearities such as force factor, stiffness and inductance. It defines the basic terms and parameters of the model, the methods of measurements and the way the results should be reported. It cancels and replaces IEC/PAS 62458 published in 2006. It constitutes a technical revision. The main changes are: - descriptions of the methods of measurement are adjusted to the state of the technology; - addition of Clauses 4 to 15; - integration of Annex A in the main body of the standard; - overall textual review.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day